Ciao Daniele, Il tappetino in gomma é fantastico! Lo sto usando per saldare e per modellismo, quando si sporca basta un giro sotto il rubinetto e torna come nuovo!
I think the kitchen table saw is slightly expensive but I like the idea behind it for model making etc.. the baby grinder thing looks really good for quick straight clean cuts... I don't see any problems with it
Ottima presentazione !!! Il banchetto sega è intrigante ma sulla sicurezza … il fatto che non ci sia nessuna protezione sulla lama di taglio specialmente quando utilizzi il mandrino laterale mi preoccupa. La precisione di taglio è comunque degna di nota. E' sorprendente come i cinesi si ingegnino nel trovare sempre qualcosa di nuovo. Utile il tappetino in silicone magnetico.
Si, hai perfettamente ragione, anche a me fa paura, ma uso poco quella funzione e comunque, sempre richiamando il fai da te, è possibile realizzare una protezione. :-)
Articoli molto interessanti. Però ci mancano tanto i tuoi fantastici video con invenzioni molto interessanti. Stiamo ancora aspettando la ciabatta arduino v2😉. Le recensioni di articoli sono utili ma deviano molto dallo scopo e utilità del tuo canale. Senza offesa intendo. Un abbraccio.
Ti seguo da parecchio ed adoro dei tuoi video soprattutto l'onestà uno dei pochi che dice chiaramente quando un determinato prodotto è sponsorizzato. Sei Bravissimo e ti ammiro continua così e ti auguro con tutto il Cuore che il tuo canale sia sempre più seguito.. PS: piccolo consiglio sponsorizza un po' di più i tuoi social network io ti seguo anche su Facebook
I made a simple crosscut sled for mine,with a much larger work surface,from 1/8" hardboard and plywood rails guiding ut the outside of the tabletop. So I can cut larger pieces. I made a T-square type of rip fence from 3/4 alum. angle stock,easier to adjust.
@@ez-8238 I was gonna say that if they didnt shipped with a cover, the drill attachment shouldnt be part of the kit. I mean, you can use your own drill. but i just realized, at least in the photo @4:13 it shows the cover for the blade. I suppose they did actually thought about that safety issue.
@@Alientcp Not only they thought about it, they included it. You can see it in the unboxing at the start. The host just didn't bother to install it before using the drill.
the blade lowers with an allen wrench thru the table, the chuck still works,it moves up and down too.. the blade guard is useless,same for the rip fence. I would make a flip-up blade guard similar to regular table saws,with riving knife. On other YT videos,I've seen some very creative homemade rip fences.
Ciao, bel video, interessante il mini banco sega, l'ideale per chi fa modellismo, ma sono rimasto sorpreso dal prezzo del supporto per la smerigliatrice, è praticamente lo stesso modello della Wolfcraft, che possiedo, e tra brico e Amazon si trova tra i 20 e i 30 euro, ma su banggood costa addirittura il doppio con l'aggravante dei tempi di spedizione. Ora capisco che BG è lo sponsor, ma per alcune cose non conviene proprio...
Why do so many of these people put horrible music in the. I was going to say background but more like front. So much better if they actually spoke and left the horrible row out
Tutto molto interessante, ma il tappetino in gomma per piccole riparazioni è Super... Se trovi un dislike da parte mia nelle notifiche, chiedo immensamente Scusa, utilizzo il tablet ed è scivolato il dito... SuperLike 😊😊😊
Lol. Gotta be smarter than the tools you work with. Just saying if you are a novice then maybe dont use tools out of your league. Just a bit of common sense for yall who are here making dumb comments. Lol.
the saw runs on 12-24 VDC,supplied by the power adapter,which was 110-240 VAC,or you could make your own cable to connect to 12-24V batteries. it draws 4 amps at 24V. (96W)
Sto cercando un metodo per tagliare i PCB, veloce e taglio pulito Ho speso quasi €100 per una sega a nastro vibrante ma sono insoddisfatto, si fa fatica a fare un taglio dritto perché la lama flette, potresti provare la sega circolare con un PCB?
I think this might appeal to someone who wants to make small things like models for presentation etc and doesn't have the space for a full size table saw.. but I agree that the price is a bit high.. I expected it to be in the range of around 50$
The mini table saw is cool and if it was $25-$30 ok great but they got it priced at $125. I bought a full size table saw on Black Friday sale last year for $99. Full price was only $135 so even not on sale it would have only been $10 more than this tiny offbrand. I don’t need another one but if this had been a reasonable price point as I said $25 or so I would get it just for convenience and not have to break out the big one for small jobs.
And if anyone wants the silicone mat this one is bigger with more features for $7 cheaper than the one in description m.banggood.com/S-170-480x318mm-Silicone-Pad-Desk-Work-Mat-Heat-Insulation-Maintenance-Platform-for-BGA-PCB-Solderin-p-1247748.html?akmClientCountry=America&rmmds=detail-bottom-alsolike
Now this is pretty cool reciprocating saw attachment for a drill. Turn your drill into a recip saw but again for the listed $20 price you can get a pretty good full size recip saw at harbor freight. m.banggood.com/Drillpro-Multifunction-Reciprocating-Saw-Attachment-Change-Electric-Drill-Into-Reciprocating-Saw-Jig-Saw-me%3Cx%3Etal-File-for-Wood-me%3Cx%3Etal-Cutting-p-1411147.html?akmClientCountry=America&rmmds=detail-bottom-alsolike
Considero il mini banco sega VERAMENTE pericoloso. Senza nessun tipo di protezione. In particolare, quando si usa il mandrino, la lama resta scoperta, con il rischio che, concentrandosi sul pezzo da levigare, ti porti via qualche dito.
I'm amazed at all the "you could cut your fingers off" comments. I mean must be a ton of Rocket Scientists watching your videos. I would gave never known that a table saw could cut off fingers. Hmm guess you learn something new everyday.
A table saw is a very dangerous machine if it is used without proper safety measures. It can cut a lot more than just fingers.You don't have to be a Rocket Scientist to know that. You only need common sense. I believe your so called Rocket Scientists" seem to have more common sense than you do.
Really tired of the "fast-motion" videos set to music. Seriously. Just demo a product in real time.... How slow did that itty bitty saw actually cut the wood?
PRODUCT SHOW IN THE VIDEO: ★★ Raitool Mini Table Saw Wood Working: bit.ly/2SlqhJN (COUPON DISCOUNT : BGDANIELECUT ) ★★ 115-125 Angle Grinder Stand Grinder: bit.ly/32y5Zlb (COUPON DISCOUNT: BGDANIELEGRINDER ) ★★ S160 Magnetic Heat Insulation Silicone Pad Desk: bit.ly/2LtzajR (COUPON DISCOUNT: BGDANIELEDANIU ) ALTERNATIVE: bit.ly/2LtzajR EXTRA PRODUCT ★★ ES120 MINI AVVITATORE: ban.ggood.vip/8y9j (15%off coupon: TOOLS15) ►SUBSCRIBE TO MY UA-cam CHANNEL ►FOLLOW ME INSTAGRAM goo.gl/qioTVz ►FOLLOW ME TO MY FACEBOOCK PAGE goo.gl/s6Utqw
Wolfcraft 5019000 1 Supporto per Smerigliatrici 115-125, 1 W, Nero/Grigio www.amazon.it/dp/B000P3DX6K/ref=cm_sw_r_cp_api_i_.cmmDbH4YV2BQ Costa di meno, arriva prima
DON'T EVERY buy from Banggood if you want your money to be held hostage with NO available stock to be shipped out. WORSE CUSTOMER SERVICE EVER as NOT respecting and NOT doing the explicit request of the customer with legal and valid grounds from the unresolved issue!
What is the purpose and uses for these tiny, tiny tools? They would have to be incredibly accurate to be of value to create miniature models or something like detailed doll house furniture. The operations they perform can be done more accurately and faster with hand tools. Big tools make big jobs smaller and manageable....tiny tools make tiny jobs...what?
The pad is cool. But seriously, for half the price of a proper jobsite saw, you are buying a kickback safety nightmare. No guard, no riving knife, no paws, questionable guage accuracy. You can buy a as new chop saw for 120 bucks if not less, instead you want to attach a 15000 rpm device into this god knows what contraption... It's not even about money, it's just plain suicidal and waiting for the accident to take a limb out.
I like this product
Very nice product
Ciao Daniele,
Il tappetino in gomma é fantastico! Lo sto usando per saldare e per modellismo, quando si sporca basta un giro sotto il rubinetto e torna come nuovo!
I think the kitchen table saw is slightly expensive but I like the idea behind it for model making etc.. the baby grinder thing looks really good for quick straight clean cuts... I don't see any problems with it
the grinder stand costs more than my HF grinder.
Need a kill switch or cover for the saw blade whilst sanding
If you hit up the link, it shows a clear plastic cover. I can only assume he decided not to install it for the video.
Cool gadget
Infact you need an apprentice
Ótima mini serra era o que faltava. Muito bom!! Tenho vontade de adquiri-lá .qual o valor em reais?
Ottima presentazione !!! Il banchetto sega è intrigante ma sulla sicurezza … il fatto che non ci sia nessuna protezione sulla lama di taglio specialmente quando utilizzi il mandrino laterale mi preoccupa.
La precisione di taglio è comunque degna di nota.
E' sorprendente come i cinesi si ingegnino nel trovare sempre qualcosa di nuovo.
Utile il tappetino in silicone magnetico.
Io ho preso un modello in cui si può smontare e cambiare la sega
Si, hai perfettamente ragione, anche a me fa paura, ma uso poco quella funzione e comunque, sempre richiamando il fai da te, è possibile realizzare una protezione. :-)
@@tommasov7791 quale hai preso? perché il fatto di non poter cambiare la lama è un punto a sfavore non indifferente
@@peppegiurdi io l'ho trovato su eBay usato ma il modello non era specificato
いいね、便利な道具です、
Ciao Daniele, gli oggetti che hai recensito mi sono piaciuti molto. Ottima presentazione e attrezzi di sicura utilità per il piccolo fai da te. Ciao
Grazie Massimo
Articoli molto interessanti. Però ci mancano tanto i tuoi fantastici video con invenzioni molto interessanti. Stiamo ancora aspettando la ciabatta arduino v2😉. Le recensioni di articoli sono utili ma deviano molto dallo scopo e utilità del tuo canale. Senza offesa intendo. Un abbraccio.
Ti seguo da parecchio ed adoro dei tuoi video soprattutto l'onestà uno dei pochi che dice chiaramente quando un determinato prodotto è sponsorizzato. Sei Bravissimo e ti ammiro continua così e ti auguro con tutto il Cuore che il tuo canale sia sempre più seguito..
PS: piccolo consiglio sponsorizza un po' di più i tuoi social network io ti seguo anche su Facebook
I made a simple crosscut sled for mine,with a much larger work surface,from 1/8" hardboard and plywood rails guiding ut the outside of the tabletop. So I can cut larger pieces. I made a T-square type of rip fence from 3/4 alum. angle stock,easier to adjust.
Nel primo articolo che hai presentato oltre al legno può tagliare anche il plexiglass o il policarbonato?
Lo tienen disponible todavía?
Para Colombia tienen envío?
Cual es el costo del producto?
Can you lower the blade on the saw? It has to spin to make the drill work, but i dont think its very safe to do so if the blade is up
No but on the flip side you can use it to build a cover for it.
@@ez-8238 I was gonna say that if they didnt shipped with a cover, the drill attachment shouldnt be part of the kit. I mean, you can use your own drill. but i just realized, at least in the photo @4:13 it shows the cover for the blade. I suppose they did actually thought about that safety issue.
@@Alientcp Not only they thought about it, they included it. You can see it in the unboxing at the start. The host just didn't bother to install it before using the drill.
the blade lowers with an allen wrench thru the table, the chuck still works,it moves up and down too.. the blade guard is useless,same for the rip fence. I would make a flip-up blade guard similar to regular table saws,with riving knife. On other YT videos,I've seen some very creative homemade rip fences.
I hope you can answer this. Do you think you can attach a Dremmel (w/saw attachment) to the angle grinder? If you can, it's sold!
جميل جدا انا معجب بالمنشار الصغير كيف يمكن الحصول علية وكم التكلفة
انا معجب بهذه الشيئ كيف ممكن أن اشتريه؟
मुझे ये मशीन चाहिए कहा ओर कैसे मिल पायेगा कितनी किँमत है कृपया बताईये
Việt Nam có bán bộ máy cất mini không
it is realy great
Wow very perfect...
Perfeito Daniele
Ciao, bel video, interessante il mini banco sega, l'ideale per chi fa modellismo, ma sono rimasto sorpreso dal prezzo del supporto per la smerigliatrice, è praticamente lo stesso modello della Wolfcraft, che possiedo, e tra brico e Amazon si trova tra i 20 e i 30 euro, ma su banggood costa addirittura il doppio con l'aggravante dei tempi di spedizione. Ora capisco che BG è lo sponsor, ma per alcune cose non conviene proprio...
First comment !! Great video !! wish you all the best !
Why do so many of these people put horrible music in the. I was going to say background but more like front. So much better if they actually spoke and left the horrible row out
Ammazza che bel taglio che fa, l'avevo vista spesso e pensavo fosse un giocattolo invece per hobbystica va benissimo
Donde o como puedo pedir los dos primeros productos y que precio tienen????
Whaaaaat?!?! $59 usd for the angle-grinder stand/chopsaw?!?! I paid $19.99 usd and mine looks LESS like a toy!! Free shipping in the US
I'm amazed it didn't come in a garbage bag all taped up
Lol. Why would that be?
Jason VonIrsik because more than half the garbage they sell comes wrapped in bags and tape .
Please send this product indian market
What is the price?
Nice! Thank you.
Tutto molto interessante, ma il tappetino in gomma per piccole riparazioni è Super... Se trovi un dislike da parte mia nelle notifiche, chiedo immensamente Scusa, utilizzo il tablet ed è scivolato il dito... SuperLike 😊😊😊
Giovanni Luca Leo puoi correggerlo
@@santopino2546 Grazie, si mi sono accorto, levato, ma a Daniele arriva comunque la notifica... Meglio spiegarsi, non ne avrei ragione, è un Grande!
Three amazing ways to end up in the emergency room, and paying for it too!
The rubber pad?
You are right .. the silicone pad looks extremely dangerous especially to an untrained user...
Only if you are an idiot.
Lol. Gotta be smarter than the tools you work with. Just saying if you are a novice then maybe dont use tools out of your league. Just a bit of common sense for yall who are here making dumb comments. Lol.
Joke's on you, I'm in the UK and got free treatment when i cut off my toes.
I want to order both item, table saw & press cutteŕ
Davide come prossimo progetto potresti fare un di strubutore di bibite comandato da Arduino?
I Liked
No blade guard no blade cover. Fun for eyes and fingers
1st thing to build according to comments is a cover for the saw lol
that table saw is scary with no cover
How much cost
What price this prduct
How many volts is the first item
the saw runs on 12-24 VDC,supplied by the power adapter,which was 110-240 VAC,or you could make your own cable to connect to 12-24V batteries. it draws 4 amps at 24V. (96W)
Molto interessante
Il secondo articolo lo ho comprato alla Lidl per la metà del prezzo di bangood ed è di ottima qualità
Dónde puedo comprar los productos
I wanted to see this mini circular saw cutting hardwood.
i used mine to cut 3/4" oak,but you have to go slow. rip cuts,too.
these look nice，and it's cheaper now.
Queria encomendar uma dessas. Mas os correios nunca deixariam isso entrar. Daqui a 6 meses vou lá em Curitiba e descubro que não veio
Sto cercando un metodo per tagliare i PCB, veloce e taglio pulito
Ho speso quasi €100 per una sega a nastro vibrante ma sono insoddisfatto, si fa fatica a fare un taglio dritto perché la lama flette, potresti provare la sega circolare con un PCB?
For what they're asking for that mini table saw one could buy a real one.
Yes, and adding customs this js even more expensive.
I think this might appeal to someone who wants to make small things like models for presentation etc and doesn't have the space for a full size table saw.. but I agree that the price is a bit high.. I expected it to be in the range of around 50$
That saw is really for model hobbyist not actual construction work.
Looks good for cutting picture frames.
@@EvoKeremidarov true. I make diy so, huge tools cant be use.
@@ez-8238 agreed.
I want this
Machin
Why 'object'? Not 'product'??
productS* ;)
The mini table saw is cool and if it was $25-$30 ok great but they got it priced at $125. I bought a full size table saw on Black Friday sale last year for $99. Full price was only $135 so even not on sale it would have only been $10 more than this tiny offbrand. I don’t need another one but if this had been a reasonable price point as I said $25 or so I would get it just for convenience and not have to break out the big one for small jobs.
And if anyone wants the silicone mat this one is bigger with more features for $7 cheaper than the one in description m.banggood.com/S-170-480x318mm-Silicone-Pad-Desk-Work-Mat-Heat-Insulation-Maintenance-Platform-for-BGA-PCB-Solderin-p-1247748.html?akmClientCountry=America&rmmds=detail-bottom-alsolike
Now this is pretty cool reciprocating saw attachment for a drill. Turn your drill into a recip saw but again for the listed $20 price you can get a pretty good full size recip saw at harbor freight. m.banggood.com/Drillpro-Multifunction-Reciprocating-Saw-Attachment-Change-Electric-Drill-Into-Reciprocating-Saw-Jig-Saw-me%3Cx%3Etal-File-for-Wood-me%3Cx%3Etal-Cutting-p-1411147.html?akmClientCountry=America&rmmds=detail-bottom-alsolike
So you want it to be MORE convenient than your full size one, but pay LESS? Your full size one costs less BECAUSE it's less convenient!
Китайские игрушки-погремушки.
Name of music ? And yes I want one !!!
Considero il mini banco sega VERAMENTE pericoloso. Senza nessun tipo di protezione. In particolare, quando si usa il mandrino, la lama resta scoperta, con il rischio che, concentrandosi sul pezzo da levigare, ti porti via qualche dito.
tumbase ten pundi pakde.?
Hahah
Saw needs a blade guard
สุดยอดเล็กๆแต่แจ่ว
Please, can you set the basic measures.
Thank you.
Adakah agen penjuainya di Indonesia Jawa Tengah
I'm amazed at all the "you could cut your fingers off" comments. I mean must be a ton of Rocket Scientists watching your videos. I would gave never known that a table saw could cut off fingers. Hmm guess you learn something new everyday.
A table saw is a very dangerous machine if it is used without proper safety measures. It can cut a lot more than just fingers.You don't have to be a Rocket Scientist to know that. You only need common sense. I believe your so called Rocket Scientists" seem to have more common sense than you do.
Stupendo il "soport amol"
Nice
A daniè che te sei fatto la combinata?....😅😅😅
:-) in miniatura
@@DanieleTartaglia Geppetto Tartaglia intensifies :-))
Really tired of the "fast-motion" videos set to music. Seriously. Just demo a product in real time.... How slow did that itty bitty saw actually cut the wood?
Haha I was going to say that...sadly a 24V 5A motor cannot do anything productive at all. Would love it with a motor upgrade.
Your links are more expensive than just going there and buying.
Forse gara la mini sega... L'altezza di taglio quanto sarà? 3cm?
Credo di si, più o meno sono 3 cm anche perchè per misure superiori non credo riesca a tagliare.
Mi scuso per il messaggio...avevo scritto Figata
Table saw price is to high invest a bit more money get a real one. The pad can be found cheaper on amazon.
please how i can order it?????
PRODUCT SHOW IN THE VIDEO:
★★ Raitool Mini Table Saw Wood Working:
bit.ly/2SlqhJN (COUPON DISCOUNT : BGDANIELECUT )
★★ 115-125 Angle Grinder Stand Grinder:
bit.ly/32y5Zlb (COUPON DISCOUNT: BGDANIELEGRINDER )
★★ S160 Magnetic Heat Insulation Silicone Pad Desk:
bit.ly/2LtzajR (COUPON DISCOUNT: BGDANIELEDANIU )
ALTERNATIVE: bit.ly/2LtzajR
EXTRA PRODUCT
★★ ES120 MINI AVVITATORE:
ban.ggood.vip/8y9j
(15%off coupon: TOOLS15)
►SUBSCRIBE TO MY UA-cam CHANNEL
►FOLLOW ME INSTAGRAM
goo.gl/qioTVz
►FOLLOW ME TO MY FACEBOOCK PAGE
goo.gl/s6Utqw
son dolares?
كم ثمنها
Ad avere soldi, me li comprerei tutti e 3...
sTILL GOT ALL YOUR FINGERS
125$? Per 129€ alla Lidl (e per 119€ alla Aldí) c'é la versione piú grande simil-professionista, dispositivi di sicurezza inclusi...
Can you send it to India and price of all machine
Why don't you buy it yourself??
Il porta smerigliatrice si trova in ogni brico a circa 20€.
Si........ DOVE?!?!?!🙄🙄 Minimo lo trovi a 50/60 euro😃😄
Good video destroyed by terrible music!
Ulf Modig You DO know about the mute option right?
I wish I knew how to mute certain people
@@ulfmodig136 I am going to give you a tip regarding that " choose carefully who you speak to or are friends with"...
Good video, but that stuff looks like real junk.... could be dangerous to even work with
Just the second one looks junky. As for dangerous, first and second can both be. But the third product is not junky or dangerous..
IN TAOBAO JUST $25-$40
Banggood is expensive, you can get that angle grinder stand on Aliexpress for much less
it.aliexpress.com/item/32974579323.html?spm=a2g0o.productlist.0.0.45bb4543fHuyWA&algo_pvid=af398386-c7d8-440b-b633-0538a6006474&algo_expid=af398386-c7d8-440b-b633-0538a6006474-20&btsid=9b0539c2-5876-4e46-bf63-c84d0140f7c0&ws_ab_test=searchweb0_0,searchweb201602_6,searchweb201603_52
Wolfcraft 5019000 1 Supporto per Smerigliatrici 115-125, 1 W, Nero/Grigio www.amazon.it/dp/B000P3DX6K/ref=cm_sw_r_cp_api_i_.cmmDbH4YV2BQ
Costa di meno, arriva prima
México does not allow buying stuff from China. Purchase gets stuck due unpaid taxes. Better buy from Amazon.
bellissimi oggetti, ma sicurezza zero!!!
non c'è nessuna protezione, con la sega ti puoi tranquillamente talgiare un paio di dita
Я хочу купить.
DON'T EVERY buy from Banggood if you want your money to be held hostage with NO available stock to be shipped out.
WORSE CUSTOMER SERVICE EVER as NOT respecting and NOT doing the explicit request of the customer with legal and valid grounds from the unresolved issue!
muito salgado preço
What is the purpose and uses for these tiny, tiny tools? They would have to be incredibly accurate to be of value to create miniature models or something like detailed doll house furniture. The operations they perform can be done more accurately and faster with hand tools. Big tools make big jobs smaller and manageable....tiny tools make tiny jobs...what?
Buyer beware they got me for $250 I'll never see again and nothing to show for it
that music so noisy!
God knows why they play the horrible loud music. Can't they dig some sinatra out
The pad is cool. But seriously, for half the price of a proper jobsite saw, you are buying a kickback safety nightmare. No guard, no riving knife, no paws, questionable guage accuracy. You can buy a as new chop saw for 120 bucks if not less, instead you want to attach a 15000 rpm device into this god knows what contraption... It's not even about money, it's just plain suicidal and waiting for the accident to take a limb out.
May cua Bạn mi ni Bạn dau chi cho MINH voi
Videos without explanations are basically useless. Unsafe saw. Inadequate blade guard. I lost part of the tip of my thumb on it.
Only thing AMAZING is people would buy this crap !
no no no no 😖👎👎👎👎👎👎👎👎👎
prodotti un po' caccosi e cari
Sorry but the tablesaw is too expensive and dangerous ... you only should use it if you wanna loose your fingers
#Banggood is highly unprofessional and unethical ....I dont have good experience...
a toy,