At a guess, I'd say it's probably an electroless (autocatalytic) plating solution. Probably nickle, zinc, or silver. It plates through chemical reaction rather than electrolysis, so there's no need for anodes and cathodes. But that's a guess, so I could be wrong.
It could be autocatalytic plating, which works through chemical reaction rather than electrolysis. It does, however, require heating, which would explain why it was done in a crock pot. Probably nickle, zinc, or silver, though I'd guess silver. I'm only passingly familiar with the process, so I could be wrong.
Hi, awesome Work! I have a question. I practice raising, too. Everytime I Strike the bras into the Air Gap, the stake pushes Up and creates a bump that deforms the raising pass. How do You avoid that? IT does Not apear to Happen in Your Workflow Passes. Keep Up Your inspiring Work. Yours sincerely An aspirant from Germany ❤
Unfortunately, it is difficult to understand exactly what phenomenon you are asking about. If you have time, it may be helpful to watch the video showing the entire hammering process on the channel.
@@hanoul-workshop3671 okay, thank You! I swear, at the time i formulated my question, it made sense to me - but not any more. I appologise for rushing my question. Anyways, thank You very much for the time You invested in answering my question. It means a lot to me. Yours sincerely
because its so rare, as long as you are a high end craftsman you put whatever pricwe you want and it will sell eventually. This is not for a market of buyers who are price hunting. It's not about being competitive.
여름밤 최고의 힐링영상!
Спасибо Вам за возможность увидеть такую работу. Дай Вам Бог Здоровья !
Прекрасная работа! Творчества и процветания мастеру!!!)
멋있으세요!
Необычная прекрасная работа. Клеймо мастера надо бы сделать на изделии. :)
It'd be so nice if there were some explanations inbetween. I would help me a lot more to understand. Please consider.
Des recuits entre les phases de martelage ?Beau travail.
I don’t think that this is his first day in the job. Amazing work.
Stunning craftsmanship.
Disfrute mucho viendo este video y quedando asombrado de la maestría y destreza de este Maestro artesano. u orfebrr.
Stunning. What more can I say ❤❤❤
Сколько Мастерства и Терпения, преклоняюсь.🎉🎉🎉❤❤❤
혹시 나무의 종류와 나무 광택제가 어떻게 되는지 여쭈어 볼 수 있을까요? 항상 영감을 주는 영상 감사드립니다. 정말 작업이 멋져요
나무는 월럿을 사용했고, 광택제는 아우로 No126을 사용했습니다.
Gute Arbeit!!
Красивый чайник😊
Молодец!
anyone know what the white liquid is that turns it silvery?
At a guess, I'd say it's probably an electroless (autocatalytic) plating solution. Probably nickle, zinc, or silver. It plates through chemical reaction rather than electrolysis, so there's no need for anodes and cathodes.
But that's a guess, so I could be wrong.
This is the electroless tin plating amount.
very very good job
빵실~_~
I too would like to know about the plating process.
it's not electro plating, there is no anode or wires
It could be autocatalytic plating, which works through chemical reaction rather than electrolysis. It does, however, require heating, which would explain why it was done in a crock pot. Probably nickle, zinc, or silver, though I'd guess silver.
I'm only passingly familiar with the process, so I could be wrong.
As someone else said, it is electroless plating. Plated with tin.
I’m curious as to what’s in the white crockpot. Very nice work
This is the electroless tin plating amount.
Класс. Но носик бы еще подлиннее и выше.
Beautiful
Hi, awesome Work!
I have a question.
I practice raising, too.
Everytime I Strike the bras into the Air Gap, the stake pushes Up and creates a bump that deforms the raising pass.
How do You avoid that?
IT does Not apear to Happen in Your Workflow Passes.
Keep Up Your inspiring Work.
Yours sincerely
An aspirant from Germany ❤
Unfortunately, it is difficult to understand exactly what phenomenon you are asking about. If you have time, it may be helpful to watch the video showing the entire hammering process on the channel.
@@hanoul-workshop3671
okay, thank You!
I swear, at the time i formulated my question, it made sense to me - but not any more.
I appologise for rushing my question.
Anyways, thank You very much for the time You invested in answering my question.
It means a lot to me.
Yours sincerely
❤❤❤❤
로고를 찍어보는건 어떨까요?
What is the chemical that turned it silver?
That is the electroless tin plating amount.
Didn’t see electrodes. Thanks
황동을 불에 그을리지 않고 저렇게 두드려도 모양이 나오나요?
+
영상에서는 생략됐지만, 망치질 사이에 가열하는 작업을 진행하고 있습니다.
Price???
Priceless...
뭘로 도금 하신건가용??
내 생각에는 은이나 아연 둘 중 하나일 것 같은데, 아마도 은일 것 같아요
Воск ( Russia). Gum (English)
주석으로 도금했습니다.
혹시 작업 의뢰 받으시나요, 공방이 가까우면 의뢰하고 싶습니다. 브라스, 브론즈이고 드럼 심벌 가공입니다.
谢谢
빵@실한 주전자
혹시 주석 구입처를 알수 있을까요?
주석도금액은 인터넷에 '무전해주석도금액'으로 검색하시면 찾아보실 수 있습니다.
@@hanoul-workshop3671 답변 감사드립니다!
선생님 현재의 재질이 무었입니까?
노란색은 황동이고,
마무리된 흰색 표면은 주석입니다.
1000 man-hours teapot
용접 하시기전에 바르는건 무엇인가요?
붕사입니다.
There HAS to be an electric hammer involved off camera...noone can make a living in 2024 making a kettle like that...NOONE!
because its so rare, as long as you are a high end craftsman you put whatever pricwe you want and it will sell eventually. This is not for a market of buyers who are price hunting. It's not about being competitive.
주전자가 빵실하다는 세상 귀여운 워딩 보고 홀려서 들어온 사람 1