Do Touchless Car washes really work? This one does even in freezing weather. Wash Chems Pro 50 Touchless Wash is truly amazing and costs $29.95 for a 32 ounce bottle.
For wheels we make our own 2 step system with this stuff. Spray Superior wire wheel cleaner with spray bottle (ph - 0), Foam with Pro-100 (Ph - 13 to 14) and Rince with a tornado nozzle. Can fully touchless even the most caked wheels. Been doing it as a detailer for over 6 months. The process Is Ceramic coating safe also!
Thank you for being very specific & showing all of the steps of your process. Some demo videos I watch, they skip steps & it can get confusing. You are always very detailed and helpful!
I think I've learned my lesson about using these products when the temp is too cold..LOL. If we can get a warmer day I will be glad to take you up on it. I do have a garage heater but, ya might not want to hang around that long.
I haven't used the Pro 100 but, I tried 4 ounces of Pro 50 and 22 ounces of water and it performed OK. I'm still playing around with the dilution ratios when I get to wash my vehicles.
@@WillsWheels from my short information about their website, the pro 50 (commercial vehicles) require a less dilution ratio vs the slightly higher pro 100. This makes me believe it’s to offer customers a more safer alternative and lower the risk of damaging a personal vehicle. That being said, it makes me believe you “might” be able to get more bang for your buck if you use pro 50 and dilute a little more if used on a personal vehicle and non commercial.
Sounds right cause the 8 ounces I used in the video was "full strength" so, when I used 4 ounces yesterday it worked really well. Thanx for the info and thanx for watching
If not in direct sunlight..I would let it dwell longer maybe, 3 or 4 minutes. When I use it, the bugs are literally running down the car at about the 2 minute point.
You can purchase them on Amazon www.amazon.com/Marolex-Axel-2000-Pressure-Foamer/dp/B07RGK654D/ref=asc_df_B07RGK654D/?tag=hyprod-20&linkCode=df0&hvadid=416671567896&hvpos=&hvnetw=g&hvrand=11796491722763765803&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023211&hvtargid=pla-871513390450&psc=1&tag=&ref=&adgrpid=96944448234&hvpone=&hvptwo=&hvadid=416671567896&hvpos=&hvnetw=g&hvrand=11796491722763765803&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023211&hvtargid=pla-871513390450
You have to look all over their website for a brief mention that it's the same, just more concentrated. Pretty much the same price though. Now they have a 30 version which is even stronger.
I used the foam cannon in the shower and let it work for two minutes. The burning sensation was intolerable and left my skin red as a cooked lobster. I was really clean tho....LOL
![[TOUCHLESS] Wash Chems Pro 50 & Pro 100 NO TOUCH SNOW FOAM - Is It Truly Touch Free?](http://i.ytimg.com/vi/mtxNEyLcnoY/mqdefault.jpg)
![[TOUCHLESS] Wash Chems Pro 50 & Pro 100 NO TOUCH SNOW FOAM - Is It Truly Touch Free?](/img/tr.png)
![[VS] Chem-X vs Wash Chems - Touchless Foam Battle - Which is Best?](http://i.ytimg.com/vi/OU7o7it8h_M/mqdefault.jpg)
For wheels we make our own 2 step system with this stuff. Spray Superior wire wheel cleaner with spray bottle (ph - 0), Foam with Pro-100 (Ph - 13 to 14) and Rince with a tornado nozzle. Can fully touchless even the most caked wheels. Been doing it as a detailer for over 6 months. The process Is Ceramic coating safe also!
It's good to learn alternative uses for these products. Thanx
Thank you for being very specific & showing all of the steps of your process. Some demo videos I watch, they skip steps & it can get confusing. You are always very detailed and helpful!
You are too kind. I feel like I stumble my way thru these videos...LOL
@@WillsWheels I certainly don't think so!
I just got some. I used a high-end PH meter on it. It's PH 13.87 undiluted. Very strong stuff. I haven't got a chance to use it yet, though.
I really like the stuff...it just melts the bugs and dirt off my car.
Looks like a really interesting video on TV behind you! :) Thanks for the Easter egg!
LOL. That's my way of giving a subtle shout out. Glad you noticed and thanx for watching.
@@WillsWheels I can come over for the glass product if you want me to come back.
I think I've learned my lesson about using these products when the temp is too cold..LOL. If we can get a warmer day I will be glad to take you up on it. I do have a garage heater but, ya might not want to hang around that long.
Great job Will.
Thank you. Almost busted the ole fandanny a few times making this one...LOL I got to catch up and watch your latest video.
Great video Will,
Thank You
Great video. I was wondering how it would react to vinyl wrap and ceramic/graphene coating
Thank You. I have PPF on the front of my cars and have used over a gallon of this product and it hasn't hurt them at all. Thanx For watching.
Should bring a foamer down to a coin op. Or run the car and heat for a bit which will warm the panels and keep the water from freezing.
it'' s all good. I had fun time trying it out.
You don’t put water in the foam cannon ?
I placed 22 ounces of water in the foam cannon (off camera) before adding 8 ounces of the soap. Sorry, I should have made that point on camera.
Hey that looked like it worked good. Way better then a normal car wash. That soap does nothing.
I was really surprised at how well it worked. I pulled it in the garage to let it thaw out and I couldn't find any left over dirt on the paint.
That's way too expensive to be using 8oz in that cannon. Just use APC, cheaper and better effect. This is just a high ph soap anyways.
it works great tho
Yee Haw!!!
Thanx for watching
Could one essentially just grab pro 50 and dilute it more to be around the pro 100 level?
I haven't used the Pro 100 but, I tried 4 ounces of Pro 50 and 22 ounces of water and it performed OK. I'm still playing around with the dilution ratios when I get to wash my vehicles.
@@WillsWheels from my short information about their website, the pro 50 (commercial vehicles) require a less dilution ratio vs the slightly higher pro 100. This makes me believe it’s to offer customers a more safer alternative and lower the risk of damaging a personal vehicle.
That being said, it makes me believe you “might” be able to get more bang for your buck if you use pro 50 and dilute a little more if used on a personal vehicle and non commercial.
Sounds right cause the 8 ounces I used in the video was "full strength" so, when I used 4 ounces yesterday it worked really well. Thanx for the info and thanx for watching
Used about 8 oz in 22oz and sprayed it on the car , nothing came off did I do something wrong rinsed it first
You used the correct ratio; I'm shocked that it didn't work. Did you let it dwell long enough?
@@WillsWheels 2 full minutes
If not in direct sunlight..I would let it dwell longer maybe, 3 or 4 minutes. When I use it, the bugs are literally running down the car at about the 2 minute point.
Where did you buy that pump sprayer?
You can purchase them on Amazon
www.amazon.com/Marolex-Axel-2000-Pressure-Foamer/dp/B07RGK654D/ref=asc_df_B07RGK654D/?tag=hyprod-20&linkCode=df0&hvadid=416671567896&hvpos=&hvnetw=g&hvrand=11796491722763765803&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023211&hvtargid=pla-871513390450&psc=1&tag=&ref=&adgrpid=96944448234&hvpone=&hvptwo=&hvadid=416671567896&hvpos=&hvnetw=g&hvrand=11796491722763765803&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9023211&hvtargid=pla-871513390450
so the chems pro 100 wash is the same as the pro50?
I think they are two different products.
Pro 50 is more concentrated
You have to look all over their website for a brief mention that it's the same, just more concentrated. Pretty much the same price though. Now they have a 30 version which is even stronger.
How’s it on the hair ?
I used the foam cannon in the shower and let it work for two minutes. The burning sensation was intolerable and left my skin red as a cooked lobster. I was really clean tho....LOL
@@WillsWheels lol
I Gave You A 👍🏻…!!! But You Have Too Much Time On Your Hands…!!!
Yes, thanks