I washed my work van with chemical guys Mr. Pink auto shampoo using a foam Cannon on the driver side, then used a vehicle brush to scrub. Then the passenger side I used Wash Chems Pro 100. The driver side got cleaner but was still dirty even with scrubbing. This van hasn't been washed in years!!!! The passenger side where I used Wash Chems Pro 100 was looking really good 👍 I went ahead and resprayed the whole van with Pro 100 and wow it cleaned it really good!!! I noticed that if the vehicle is extremely dirty with years of crap it's good to spray it a second time and let it soak for 3 minutes. Make sure the vehicle isn't in the sun while you let it soak. I'm using an electric pressure washer with 1,700 psi it did ok. If I use a gas powered washer with a 3,000 psi I'm sure it would be a night and day difference. It's a great product just gotta mix it right and sometimes reapply, I'm very happy with it!!!!
For wheels we make our own 2 step system with this stuff. Spray Superior wire wheel cleaner with spray bottle (ph - 0), Foam with Pro-100 (Ph - 13 to 14) and Rince with a tornado nozzle. Can fully touchless even the most caked wheels. Been doing it as a detailer for over 6 months and will never go back to scrubbing. The time savings is insane.
Their website says the Pro 50 is more concentrated and made for commercial use. If you look at the dilution ratio, the Pro 50 version is basic 2 times more concentrated. Seems kind of useless to make and sell the Pro 100 version.
Great video... I have seen some wash chem videos but they didn't do a pre rinse... You should have tried that way n see how it cleans. Thank you for making this video. Very helpful.
Yea they worked well enough for removing dirt and grease. No affect on oxidation and minerals like you get from an acid but on a well maintained vehicle this should work perfect.
I washed my work van with chemical guys Mr. Pink auto shampoo using a foam Cannon on the driver side, then used a vehicle brush to scrub. Then the passenger side I used Wash Chems Pro 100. The driver side got cleaner but was still dirty even with scrubbing. This van hasn't been washed in years!!!! The passenger side where I used Wash Chems Pro 100 was looking really good 👍 I went ahead and resprayed the whole van with Pro 100 and wow it cleaned it really good!!! I noticed that if the vehicle is extremely dirty with years of crap it's good to spray it a second time and let it soak for 3 minutes. Make sure the vehicle isn't in the sun while you let it soak. I'm using an electric pressure washer with 1,700 psi it did ok. If I use a gas powered washer with a 3,000 psi I'm sure it would be a night and day difference. It's a great product just gotta mix it right and sometimes reapply, I'm very happy with it!!!!
Yessir you hit all the points!
For wheels we make our own 2 step system with this stuff. Spray Superior wire wheel cleaner with spray bottle (ph - 0), Foam with Pro-100 (Ph - 13 to 14) and Rince with a tornado nozzle. Can fully touchless even the most caked wheels. Been doing it as a detailer for over 6 months and will never go back to scrubbing. The time savings is insane.
That's not a bad idea. I usually use an iron remover and then foam this over and pressure wash off.
Their website says the Pro 50 is more concentrated and made for commercial use. If you look at the dilution ratio, the Pro 50 version is basic 2 times more concentrated. Seems kind of useless to make and sell the Pro 100 version.
Yea I never understood why they do that
@@BelLavoroAutoSpa I noticed they have a Pro 30 version on their website. I don't think I'd want to try that on my car though.
@@RichardsWorld probably just even more concentrated
Great video... I have seen some wash chem videos but they didn't do a pre rinse... You should have tried that way n see how it cleans. Thank you for making this video. Very helpful.
I did. Tried it both ways in the video.
@@BelLavoroAutoSpa Apologies. Yes you did. My mistake. I am really looking for something like this but can't find anything. I live in an apt too.
@@reggaeprince6215 use this in a spray bottle at a coin car wash, probably easiest way.
Thanks for sharing! Looks like they did an okay job. I noticed alot of browning coming from the wheels and tires.
Yea they worked well enough for removing dirt and grease. No affect on oxidation and minerals like you get from an acid but on a well maintained vehicle this should work perfect.
Use formula 4 in a form can as a drying aid
Yea you could. I use ceramic products.
what kind of water pressure machine do you use Great video
Karcher K1900
How long should you let this stuff dwell for ?? Before washing off
About 5 minutes out of direct sunlight
Lo recomiendas para un negocio de lavar carros?
Si
@@BelLavoroAutoSpa thanks!
Sir how to order from India
I do not believe these companies ship to India unfortunately.
It did bad for my semi and doesn’t do chrome well
Yea its a little too strong for metal parts I've noticed. For me it has become my touchless wheel cleaner.
Didn’t work for me sorry
No need to apologize, there is no 1 thing that works for everyone!
@@BelLavoroAutoSpa yes sir you got that right