Onefinity CNC - Dust Boot Assembly & Install - Beginner CNC Owner Set-Up Instructions

Check out the Suckit Dust Boot as a great accessory for CNC dust collection. I am a beginner CNC woodworker/operator and am using this video to share with you some tips that I picked up as I set-up my Suckit Dust Boot for the Onefinity Woodworker. The Suckit Dust Boot is a great add-on for helping contain dust and redirect it to your suction above.
This machine was given to me by Onefinity CNC and is a refurbished model. Thanks, Onefinity!
You can check out an official full assembly video of the CNC on the @onefinity UA-cam channel or check out their website at www.onefinitycnc.com to check out the machines!
Thanks for checking out the video today! Christy can also be found:
- Instagram @oakhillmillworks - / oakhillmillworks
- Facebook @oakhillmillworks - profile.php?...
- Website www.oakhillmillworks.com
Affiliate Links:
Shop on Amazon - www.amazon.com/shop/oakhillmi...
Shop Home Depot - homedepot.sjv.io/P0KRPX
Shop BAD North America - badnorthamerica.com & use OHM10 to save 10%
Shop ZAR finishes - www.zar.com/products/zar-inte... & use OHM10 to save 10%

[@hawkeye5228]

Love this channel. Wished I found this earlier. You do a great job Christy explaining for the beginner!

[@OakHillMillworks]

Ah. I really appreciate you taking the time to tell me! I hope to keep making more videos like this!

[@OnefinityCNC]

Great video Christy! Love it!

[@OakHillMillworks]

Thanks!

[@debbienorris7268]

Enjoyed the video. Thanks!

[@OakHillMillworks]

Aw. Awesome! Thank you for watching.

[@Realbassman2011]

Great video!

[@OakHillMillworks]

Thank you, Dan!

[@lockcitywoodworks]

Good stuff!

[@OakHillMillworks]

Thanks, Tim!

[@OP_Ramgarhia]

Awesome video 👌👌👍👍

[@OakHillMillworks]

Thank you, Sidhu!!

[@bigkremey]

Perfect!
Not sure how you got lucky enough to not struggle for like 10 min to get the brush in the channel 😡🤦🏻‍♂️
I ended up taking a tiny bit of 3 in 1 oil to lube up the brush so it would slide in better. That was probably the most frustrating part of the whole CNC build lol

[@OakHillMillworks]

Wow! Seriously?! I just got the very end in first and worked it in. Mike from Broken Lead Woodworks said he had a really hard time too.

[@cheneyconcepts]

Haha agreed! Took me what felt like a century!

[@tomforeman1123]

Now what size hose connector does one use?

[@OakHillMillworks]

Ya know that’s the trickiest part! I bought so many different connectors until I could find one that fits. The one I ended up with was a connector from a ridgid hose set. I am out of town and can’t tell you the exact size.

[@deantokarsky5176]

I will be using a 4-inch dust collection hose, is there an adapter to attach it to the Suckit dust boot?

[@OakHillMillworks]

I’m not sure about that. I have since discontinued using the suck it dust boot because it became tedious to adjust its height manually. I ordered one from Etsy that attaches to the router body itself so it is going up and down automatically.

[@alejandroperez5368]

@@OakHillMillworks what the hell? Z-independent shoes are supposed to be better than the ones mounted on the spindle.

[@OakHillMillworks]

@@alejandroperez5368 🤷🏻‍♀️ I hated the suckit. I’m not sure I have the best one available now but I like it a lot more.

[@seamancustombuilds2553]

Those dang tiny screws

[@OakHillMillworks]

😂 I can’t imagine how men with big sausage fingers could handle those.

[@grumpywoodchucker]

Tiny screws....ugh. lol

[@OakHillMillworks]

😂 super tiny.