Windage maxed out fix

[@127TROOP]

Never thought about swapping the mounts….my windage is maxed out, I have fitted new lower mounts for eye relief…yet to re-zero, but if the windage is still the same, I’ll swap the mounts…thanks buddy….and ignore the knobbers, if that’s all they have to whinge about then your job is done 😉🤙

[@michedmck]

So much for the "professionals".... well done on the fix. Not easy to spot!

[@DieLuftwaffel]

Do your overlords know you have a weapon of mass empowerment? 😂

[@bonphone4222]

This video was 5 mins longer than it needed to be.

[@victorpashkevich8801]

Had a similar issue and found the rings were not aligned along the barrel saw a video of a chap flogging a metal rod on top of the rings that you aligned with the barrel, I used a piece of plastic conduit

[@velocity-mh5sm]

I believe I saw the same video where he used a steel rod & grinding compound. I am a mechanic so I was determined to sort it out as I purchased the most expensive rings. My conclusion is that they are machined in the factory & are required to be put on the same way as they are machined. I did not mount my scope initially but swapping front to rear I was under 1 MOA to centre compared to only 1 MOA remaining for right windage adjustment

[@roninsixx3541]

Literally have the same problem. I will try swapping the base rings.

[@ianhoxsie4779]

Did it work?

[@roninsixx3541]

Yes.

[@user-oz3hh4om9o]

I have to try now… my windage is maxed out to. 🙏🏻

[@skr1p5]

I couldn’t watch it because you need to get to the points

[@mekanixyourlocalcardoctor3726]

Thanks for the “point” er