How to Replace Power Window Motor 2004-2015 Nissan Titan
Вставка
- Опубліковано 7 гру 2022
- Buy Now!
New Power Window Motor from 1AAuto.com 1aau.to/ia/1AWPM00210
This video shows you how to install a power window motor on your 2004-2015 Nissan Titan. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
This process should be similar on the following vehicles:
2004 Nissan Titan
2005 Nissan Titan
2006 Nissan Titan
2007 Nissan Titan
2008 Nissan Titan
2009 Nissan Titan
2010 Nissan Titan
2011 Nissan Titan
2012 Nissan Titan
2013 Nissan Titan
2014 Nissan Titan
2015 Nissan Titan
Tools you will need:
• Pocket Screwdriver
• 10mm Socket 1aau.to/oaLk/1AXAA00017
• 8mm Socket 1aau.to/oaLk/1AXAA00017
• Trim Tool Set 1aau.to/oUI/1AXXX00006
• Ratchet 1aau.to/obe8/1AXAA00016
• Socket Extensions 1aau.to/oa3h/1AXAA00015
• Gloves 1aau.to/oyP/1AXSS00048
• Painter's Tape
• Safety Glasses 1aau.to/os2/1AXAA00343
• Pick 1aau.to/oD8/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Авто та транспорт
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
extremely well produced for those of us that don't do this for a living
The dealership charged me over $900 to have one of these replaced. 2 years later and I need to replace it again. Needless to say I will not be sending it back to the dealership. You saved me a lot of time, money and frustration. Thank you so much man!!!!! Appreciate you!
Absolutely the most complete and detailed How To Video I've ever seen! You guys did a fantastic job. You made replacing my motor and regulator on my 2004 Titan an actual pleasure instead of a stressful experience! All I can say is thank you.
Excellent, excellent, excellent Nissan go-to window video on youtube. I'm an older woman, not mechanically inclined, and I was able to follow and replace the regulator and motor on our Nissan truck. This video saved us a ton of money since I have 2 windows to fix.
My window rolled down and never came back up. Big storm coming in and the sicada season is starting. Bought a replacement motor at autozone and followed along step by step in the parking lot. All in all it took about an hour and a half. This video was a lifesaver and a money saver. Two thumbs up!
Best instructional video ever... Every step of the way... Thanks...
This man just assumes people have a 10mm everyone knows the world just shares 1 10mm socket
You said you need to take the two mounting regulator bolts out however the regulator was bad and stuck in a position where you couldn't access the other bolt. You removed the second bolt off scene and didn't even show how you got it out. Not helpful
I had to replace the unit in the passenger rear door. Somewhat different, but similar enough to this. Thanks for the helpful video. Very well done.
I just did my 2010 Nissan Armada. Awesome instructions. Thank you!!
I just got charged $375 to get this done, I won’t be doing that again. Awesome video, thank you!
You are a life saver. Thank you for such a a detailed how to vid!!!
This video really helped me do this job. Not that its done, I don't know what I was worried about.. its actually a pretty easy job! Thanks!
+Paton MacDonald Thanks for watching our video! 1aau.to/m/Shop-TRQ
Great Vid!! You took your time and went step by step. Aside from helping me out, I'm positive it's going to help out a lot of other people down the road. Thank you for taking the time to make the vid, it is appreciated 👍
Great video. So much help. Bless you
Very clear and to the point............great job!
Terrific video. Probably the best instructional video I've watched. Great job thank you!
This video just saved me!! Thank you soo much!!!
What a thorough demonstration! Good job and thank you!
Worked Like a champ. Thanks for the inspiration!!!
Nice video thanks my friend god bless you. Your video gonna help me a lot.thanks again
Hey I'm about to buy an 06 Nissan titan with the window stuck down. Will I have issues accessing the front window bolt? Or is there a way to manually raise the window to get access?
My window sounds like theres gravel when it going up? Is that the motor?
Thank you!
To answer a couple of comments I saw below, yes there is a small courtesy light at the bottom of the door inside panel that wasn't mentioned. I didn't think it had an electrical connector, but it does, the white connector just pulls out from the bulb holder assembly. Also, you never said how you got the window down to the midpoint level in order to access the two bolts to the regulator. I just plugged in the control panel, like you demonstrated at the end of the video to test everything before reassembling the door, and moved the window down to the level where I could see the forward mounting bolt through the metal opening. Someone asked how was he going to get the window to go down since it stopped working. I'd try pressing the down button and then try helping to force the window to go down at the same time, kind of like helping the motor along. There are also other videos that show spraying silicone spray into the side seals of the windows can help with dry or dirty rubber window seals. I'd also try using silicone spray and a shop towel wrapped around a small screw driver to help clean out all the dirt that can build up in the horizontal window seal. My truck lives outside and after nearly 20 years I was blown away by how much dirt had built up in this horizontal seal. After I cleaned and sprayed all the seals with silicone, my window was able to be coaxed/helped back up, and going down also got much easier. But I still replaced my nearly 20 year old tired window motor and regulator, and now my window works like the day I brought it home from the dealer.
my window its dead wont roll down so would i get it down to remove the regulator where i would need to remove the bolts/screws that holds the window to the regulator? thanks
Didn’t say anything about the wiring to the light at the bottom of the door which comes on when the door is opened
So from watching this, it looks like the nost difficult part of this job is not losing the 10mm socket
If the windows go down slow ,what should I check?
You left out the pinch prevention reset
not groove...slot