Land Rover Discovery 2 TD5 - Clutch Master and Slave Cylinder Replacement
Вставка
- Опубліковано 13 жов 2016
- Here is an eBay link to the Discovery 2 Clutch Master & Slave Cylinders rover.ebay.com/rover/1/710-53...
This time round, I deal will a very soggy and almost non-existent clutch pedal by replacing the Clutch Master and Slave Cylinders.
Also in this video, I ponder what the first words spoken by aliens will be, when they finally visit planet earth and later, I drink some coffee. - Авто та транспорт
Thanks for this video. My new discovery has exactly the same issue and I will be trying this, this weekend. Plus the bias plate
great job. thanks
Hahah! Very helpful and hilarious at the same time, mate you crack me up, thanks
+Mark Sills Thanks Mark, glad to hear you enjoyed it. "It's the way I tell 'em."
I’m having a nightmare with mine bleeding wise but i put my slave on upside down hopefully I can get it sorted when I swap it around
Another fine video, it must be a pleasure to drive now. Enjoy Chester..
+Raj Masani Thanks Raj, looking forward to watching the world go by and other people rushing around. You're right, with a clutch that works, an engine that can breath and a chassis that wants to stay in one piece, it feels the way it was designed to be. :)
Cg tv tv
Bleeding
I have to do this very job asap but not sure on bleeding. Any more tips and info on this will be very helpful. I have subscribed very helpful videos
How long did it take to bleed through once you'd put it all back together again? I've started the same job and can't get any pressure at all.
Cheers younger Kevin,mines had new clutch,slipping as was old,been all round the place and my feelings tell me change these f ing things, same as in different feeling since clutch change/ plus putting her into gear isn't as smooth as should be.. enjoying your barge trips I hope..shall be viewing your latested adventure today..
Excellent vids will you do anymore for us?
No pressure switch on your clutch master cylinder ?
Thanks for the complete video ! I'll try this (and succeed I hope) this weekend, my td5 got the same issue. I just have a little misunderstanding about the bleeding, what is the right order : Push ->Stay pushed + open the bleed -> close the bleed -> up -> push -> stay pushed + open the bleed ... and so on until no air in the system ?
Ok I succeed ! Without any issue, everything is perfect now, I feel that I have a new car.
I was alone for the bleeding but it went well. This is what I did : 3 clutch pushes, keep pushed on the 3rd with something, a stick, to leave the clutch pushed, open the bleeder for 3 secondes, close it, and all again. In five minutes it was done
A satisfying job well done I'd say, Florian? 🙂
Oh, and I forgot the Watts linkage, new battery, full mat set, injector loom and fuel regulator . . . Happy Days . . . !
Good vid, ta very much. I'll do my master cyl at the weekend due to it leaking. I take it you have not had the other fun issues like blown head, blowout rear airbags, duff starter motor, alternator, ign switch, radiator, blown top hose, both steering swivel pins on both sides, ACE leaking pipe and of course, the ubiquitous leaking sunroofs? Lol!
+Sleepy Cat Pictures
None of the above but the Power Steering Pump has started playing up, and the 3 Amigos have made an appearance. :(
Yes, might be an idea to check the alternator output though before looking at the ABS sensors. they all came on when my battery was dying. Oh yeah, I forgot I'm on my third steering box . . . Not always a good idea to buy second-hand I suppose. Mind you, any steering input from the driver I've always found to be entirely superfluous to the outcome of the journey!
Well done with the chassis job, I wouldn't even contemplate doing that!
+Sleepy Cat Pictures
That's interesting. Hadn't thought it might be caused by a dying battery. Will check that out. Cheers.
My alternator went very insidiously. It behave perfectly normally but was only putting out 10 volts= chaos on the way home afetr a trip out.
Thats all very well but wot kind of cake was that you were eating
+Jimmy Riddle Lol. :D It was a Spar Iced Current Bun from the local garage. Comes in a pack of three and only costs one pound. Together with the Latte, just the thing after a days slog working on the car. P.S. Love your username. :)
Must pop into our local Spar..Nice video btw..I have subscribed
Привет я из России г Самары мне очень нравится ваше видео и очень нравится автомобиль лендровер дискавери 2 .можно ли через вас приобрести на лендровер дискавери запчасти, мне нужно насосфорсуки или ремкомплекты на них
Of course the new clutch went in when they changed the engine - and air-con condenser - which still doesn't work . . .