C4FM Call Freq
Вставка
- Опубліковано 2 лис 2024
- This is on the C4FM Call Freq. What is it? How to set it up in your radio. How to use it.
When going through the hands on part, I try to go slow enough for an old fart like me to follow. Remember, this is not an entertainment show, it is information on What, How, Why, When and Trick of Fusion I have learned over the last about 7 years I’ve been working with Yaesu System Fusion.
73 de “The Fusion Elmer Guy”
Don't forget the UHF C4FM call freq.
This is the 3rd time I have watched this. Thanks for the content. -KI5TDK 73
Hello Mr James, haven't talked to in a while.
73
Ken
Learning with the FT5DR, not quite to same steps. I’ll need to learn a little more about my radio, and where the different menus are located. Thanks for the overview
Hi Joe, thank you for watching these videos. I guess it’s time for me to buy another radio or two. Had a new Ham come to the club meeting last night with the new FTM-500, Now that’s a sweet radio and sounds awesome! I even used my FT3D with the Speaker-Mic/Camera and sent it a picture … looked real good on that screen! I wish I had the radio so I could make a video for you. 73, Ken
Very good video and I like how you explained everything slowly.
Thank you 🙏
Absolutely the best video to learn C4FM yet KI5HZZ
Why thank you! If you have any other questions or other topics you would like me to cover, feel free to contact me on Wires-X node #11618. Hams helping Hams!
I still haven't been able to connect to fusion and pretty much hate the FT-5 except for the aprs. Im sorry my frustrations are coming out on your comments, but Why would they make finding the repeaters such a pain in the ass to figure out, then add another level of confusion by not having the repeaters do the same functions that you also have no idea what they are. Also why wouldn't the gps function do all that for me? Also if I want to pick what room I would like to enter, NOPE cant do that. So far, I cant stand fusion also cause I cant even get into it. What's amazing is that this radio was so promoted as a radio to get on digital in minutes. LOL Ive owned it for a month and haven't been able to pick a room, the time it goes on the shelf is getting longer and longer.
Tony, I have no idea where you are, but I’m in California, can you give me a call on the phone? I need more information, maybe we can do a zoom call or something? Ph 661-599-4499
Yaesu digital is like 1 1/4 meters. Some areas have more activity then others that have none. Where I am ,there is ONE repeater that is still in AMS mode (up on a mountain at 9,000 feet ) and only a handful of people who have radios to use it. I have a FT70DR and FTM7250 that program easily from the key board. I found a wires x repeater while driving thru Tucson, Phoenix, LA and a linked group around KC and had no problem join the group. There are 3 of us using it as UHF simplex and it is amazing the range a HT has from INSIDE a house. Where are you located?
@frankpeletz1818 Hi Frank, I’m in Gold Run, CA at 3400 ft.
73
Ken KA6SUB
same for me with 991A. manual do not say nothing , and watching some tutorials i did not solve some connection problems. i had to tell to some collegue ham. thank to Iu5FFW i ve solved. but still not connect to some room lol
Man, you are easy to watch. Thank you for this video. Careful, some of us adopt grandpa's! lol
I hope you will continue to make videos on system fusion and wires-x. I'm working with the ftm-300DR and this digital mode is all new to me.
Thank you. Yes I will continue to focus on the Yaesu System Fusion. How do you like your FTM-300DR? I love mine. Just take digital one step at a time and you'll be OK. Don't forget to subscribe so you don't miss the next one! 73 "The Fusion Elmer Guy"
@@thefusionelmerguy2234 I almost got the 100DR to get into the digital but I'm glad I waited and they came out with the 300DR. I really like this radio although I have lots to learn about it.
Definitely got subscribed. I haven't seen any other channels that take the time to walk through the steps so pretty much anyone can understand. I need to watch your other videos because I'm confused what the difference is between wires-x and fusion.
I’m sorry that it has taken so long to answer you, but I just found a bunch of these comments that I had missed. To answer your question, FUSION is the ability to have both FM (Analog) and C4FM (Digital) work together in the same Radio/Repeater, this is made possible with the Yaesu’s Automatic Mode Select (AMS).
Wires-X on the other hand is a VOIP protocol used by Yaesu to link repeaters to repeaters and to individual Ham Radios. A Wires-X node is much like EchoLink or IRLP nodes. Wires-X does NOT come with each Yaesu repeater sold. The repeater group that buys the repeater will decide whether or not to purchase a Wires-X node (HRI-200) and how it will be integrated into their system. So, just because you have a Yaesu FUSION Repeater in your area, it does not mean that there is Wires-X on it. Also, if there is a Wires-X node on the repeater, it could be using a different DG-ID than the one that you use to talk on. You have a separate Wires-X Menu in your radio for setting up Wires-X DG-ID’s and other related things.
Hope that this helps. 73, Ken
Where did you come up with this frequency? My Google searches have come up with various frequencies being used throughout the US.
This is a frequency that had been suggested by John Kruk at Yaesu. They did some research and found that this would have the least adverse affect. Nothing is 100%, there has to be some give and take. Remember that the "Band Plans" are set up to follow how the bands are commonly being used by the Hams. Agencies DO NOT ACT, THEY RE-ACT! They will not give you something if they don't see a need! STANDARD ARE SET BY YOU, agencies just make it official! Hope that this is helpful. 73 de KA6SUB "The Fusion Elmer Guy"
talked with you the other night when on wires x and chris and i were in colorado springs running analog... 73 my friend.. tony t. n0amy...
Hey Tony, did you ever look at the Audio settings. You may also want to look at the settings for HRI-200 setup and try changing De-emphasis and Pre-emphasis to see what happens.
what is the procedure for a ft 70 dr
thank you!!
Sorry for taking so long to get back to you on this. Looking at your keypad, you see the #4 key, above it says STEP. You will need to press the "F" key then the "4" key and rotate the knob to select the desired selection.
Ken 73
good vid, will watch it again when in the radio room.
Thank your comment, it’s nice to get the feedback. If you have any other questions or other topics you would like me to cover, feel free to contact me on Wires-X node #11618. Hams helping Hams!
I enjoyed your review and setup of C4FM.
Recently I purchased a Yaesu FT70DR which is my first radio with Wires X capabilities. Using the radio manual is quite a feat, I am able to depress the ‘F’ key and then ‘AMS’ and connect to the gateway of WiresX but I’m not really understanding the writeup in the FT70 manual to advance any further,
Will you consider going through ALL the steps necessary to setup WiresX on the FT70DR in an upcoming video.
Apparently I need need to register with Yaesu and provide my HT ID,
how do I determine that info?
Thanks for you time
KB5WRL
Hi Ron,
Thank you for your comments, doing a review for the FT70 is on my list. As far as registration of the FT70, it is not necessary for you to use. The ID was set at the factory.
Thank you for watching,
Ken. KA6SUB
Thanks for covering basics. I am a fairly new ham and messed with DMR. Now fascinated with Fusion. I have trouble CD abuse I confuse the two.
Hi Steve, thank you for taking the time to become more aware of Fusion and some of its many features. If you need any more information on Fusion, feel free to contact me anytime either drop me a line here or on Wires-X #43206. Again thank you, 73 from Ken KA6SUB “The Fusion Elmer Guy”
@@thefusionelmerguy2234 thanks but have not been able to find even the most basic procedures. Again, I am somewhat confused having done a little with DMR. How do I get to a room or person? Just enter the number? When done with chat, do you have to “disconnect” like with DMR. I wave watched lots of excellent videos but have to admit this most basic thing never covered. Video with a qso from start to finish?
I am in an area that as far as I know I will not be able to connect via repeater so plan to use hotspot connected to home Wi-Fi or iPhone. KD9SEZ
Hey Steve, do you have EchoLink on your iPhone? If you do, call me so I can help you. Look up KA6SUB-R. I will be available until 8am California time. I am doing a Net Control today for “The America river classic horse ride”. I should be back on the air after 5pm today. I’m available most any other time. Ken KA6SUB
What is the 70cm C4FM call channel?
446.175 is popular for fusion.
We've got an IRLP simplex node locally where I am at 145.55, so we've been using 145.78 instead so we don't cause interference. C4FM simplex works well for me. 73
Hi, nice hearing from you. I like IRLP as an analog node but, not many out there as EchoLink or AllStar. Do you have a Fusion repeater where you are? Give me a call on IRLP at #3714 (KA6SUB Ken) and we can talk. 73, Ken
Be sure and check the SQ setting in FM mode. If SQ is open (0) - no XMIT.
Why are you going to FM to check the C4FM squelch setting? When you open the squelch, whether in FM or C4FM, the busy light comes on. That is all you need to know! Save yourself the extra work and set the Squelch in the C4FM mode by watching the Busy Light. Set the squelch so the Busy light is either flashing or the first step that the light is is fully off.
It is true, while in the GM mode, the radio will send out a beacon only when the frequency is not busy (Busy Light is OFF or Flashing).
Remember that even if the squelch may be open (Busy) you can still press the PTT and talk!
Thank you for your comment,
73, Ken KA6SUB
Wouldn't it make sense to have a Yaesu-specific call frequency be a frequency that can be accessed without reconfiguration of automatic step intervals on Yaesu radios?
ExtremeSquared, I think in all fairness you should ask John at Yaesu this question, all I can do is give you my opinion based on what they had put out at the time they came up with it. In my opinion based on the videos from Yaesu, they were looking for a frequency that would fit into most band plans using the best hamming practices. Thank you for the question.
How do I change the step on the FT-70D. Why did you pick a frequency that is not easy to program?
Hi Bruce, sorry that it has taken so long. This Frequency was picked by hams working at Yaesu, they had to find one that could be used in most of the world. I made a video for you ua-cam.com/video/TenHgqrMzck/v-deo.html Thank you for your question,
73
"The Fusion Elmer Guy"
Ken KA6SUB
f,then 4. button labled step
is there one on 70cm as I believe 2m is not allowed here in the Philippines
Hi Larry, over the last few months I have been doing some research for you, but have been unable to come up with a good answer. I would think that if you in the simplex portion of the band and most of you agreed that this frequency will be used for C4FM only. Sorry I couldn’t find a better answer.
But can't find how to display or enter more digits in the ft-70d. Any help?
Hey, check out this UA-cam link! ua-cam.com/video/TenHgqrMzck/v-deo.html
Heh! Still no agreed 10 meter AM call frequency.
This is a frequency that had been suggested by John Kruk at Yaesu. They did some research and found that this would have the least adverse affect. Nothing is 100%, there has to be some give and take. Remember that the "Band Plans" are set up to follow how the bands are commonly being used by the Hams. Agencies DO NOT ACT, THEY RE-ACT! They will not give you something if they don't see a need! STANDARD ARE SET BY YOU, agencies just make it official! Hope that this is helpful. 73 de KA6SUB "The Fusion Elmer Guy"
Does this work on the ft-70
Yes it will, just remember that the 70 is menu driven, you just need to find the menu for Step. Have fun. Ken KA6SUB