The Woodcut Bowl Saver Follow Up

Simon Hope: https: hopewoodturnin...
Axminster Tools: www.axminstert...
Bowl Saver
www.axminstert...
Olivers Woodturning: www.oliverswoo...
Yorkshire Grit: yorkshire-grit...
Hampshire Sheen: www.hampshires...

[@wakelywanderer12]

I have this system and watched a number of tutorials on it. This is the only video I’ve seen that explains exactly how to use the templates and exactly where the cut goes in relation to them.

[@MikeWaldt]

Glad you found the video useful and thanks for watching.

[@petereaton9795]

Thanks Mike for both videos.

[@MikeWaldt]

Thanks for watching Peter.

[@dallaspowers4173]

I've had this for several years and found it to be very useful. Really cuts down on waste and makes for nice bowl sets.

[@mikedoyle5362]

Very well done on the follow up Mike. Thankyou and have a great week ahead.

[@MikeWaldt]

Thanks Mike.

[@alanmullock381]

Good of you to spend time making a follow-up video Mike👍👍👍👍👍👍👍👍👍👍👍

[@MikeWaldt]

Thanks Alan.

[@ronmirrell9483]

Hello Mike
First I want to apologize for not letting you know how much I appreciate you taking the time to share your vast knowledge of wood turning sooner. I am fairly new to turning only been at it for about 3 1/2 years now but am enjoying it immensely Thanks to you and a few others that share their talents and techniques it is Greatly appreciated!!!! I am new to these videos thanks to my super computor savey Grandson who has taught me how to get in watch and find fantastic people that want to see others succeed and keep the art alive. I have enjoyed seeing your awesome projects and look forward to see more! Stay Safe and Well my friend.

[@MikeWaldt]

Thank you for your kind words Ron very much appreciated.

[@glencrandall7051]

What a great tool. And your demonstration and explanation is right on. Thank you for sharing. Have a great day and stay healthy.

[@MikeWaldt]

Thanks Glenn much appreciated.

[@Stable_Studio]

Good job Mike 👍well presented

[@MikeWaldt]

Thanks Brian.

[@Bramsshed1913]

A brilliant follow up mate !
Cheers Mike, Bram

[@MikeWaldt]

Cheers matey.

[@lenny5355]

Great follow up Mike, I am jealous you get all the good toys lol.

[@MikeWaldt]

Lol ... thanks Lenny.

[@tommysworkshop120]

Mike with the centring of the bowl you can turn then around and put it back in the mother bowl then use the tailstock to hold the bowl inside the bowl to put a mortise or tenon on

[@MikeWaldt]

You can do that for sure Tommy I personally prefer this approach. Many ways to skin the same cat me thinks 🙂

[@WoodenItBeNice]

Hi Mike, Great follow up video. I have considered this tool several times but I really can't see me getting enough use out of it so I have never bought one. Take care Mike. Cheers, Huw

[@MikeWaldt]

Thank you Sir. I have been coring every bowl blank I have ... both big and small ... getting obsessed with saving as many as I can now 😂😂

[@RubenWoodcraft]

If you core out the bigger first, you can flip it around and use the largestbowl as a jam chuck. Either way works, just thought I should mention it

[@MikeWaldt]

More than one way to skin a cat Ruben 🙂

[@craigdance5474]

Good video. I have the Max 3 version of this tool... has 3 different size blades. Fantastic if all your woods are soft. Wont touch hardwoods unless they are greener than Kermit the frog.

[@MikeWaldt]

Thanks Craig. I'm afraid I have to disagree about the hardwoods. I have only thus far used it with dry Ash and Oak and with the 5° relief bevel it comes with, it cores them very successfully.

[@craigdance5474]

@@MikeWaldt not like our tassie woods then. I think some of ours are iron impregnated.

[@glenmckelvey5952]

Great info Mike take care .

[@MikeWaldt]

Thanks Glen.

[@Stable_Studio]

Practice makes permanent 🤣
Only perfect practice makes perfect 👍👍

[@thomasarussellsr]

Ahh, but nobody is perfect, so practice will only get you so close as is humanly possible.

[@Stable_Studio]

@@thomasarussellsr indeed However if you practice a skill incorrectly, it will always be Incorrect 😂😂😂

[@charlesreicks648]

Mike I have a Shopsmith Lathe and as you know they have tubes for a bed not flat steel. Do they make something for that? Thanks

[@MikeWaldt]

Hi Charles, I'm afraid I don't know.
Sorry I can't be of more help.

[@eriklarsen6131]

For us who is not that familiar with the english language, could you explaine the word braise? Is it like soldering?

[@MikeWaldt]

Similar Erik yes 🙂

[@manuelramirezmartos3804]

Hola amigo me podría decir dónde ha conseguido este útil

[@MikeWaldt]

De Axminster Tools and Machinery aquí en el Reino Unido. Salud. Miguel.

[@spindlesworkshop9744]

thanks for the info

[@MikeWaldt]

Cheers Louie.

[@anthfoulds5711]

Can it be used on a resin and wood bowl? Or is it just strictly for void use?

[@MikeWaldt]

I would not recommend it for resin ... but that's just my opinion Anthony.

[@kennyosborne4341]

Where can I purchase this

[@MikeWaldt]

The link is in the description Kenny.