You need to do stainless steel brake hoses on the STI, trust me 10000% worth the money, just did mine and now it’ll throw you into the dash if you slam em, they’re insane
I was doing a last minute brake job and ran out of fluid. Turns out most gas stations sell fluid and the one near me even had DOT 4 which I was needing for mine. Just a thought in case this ever happens again!
You should invest in a Vapor Honing machine next! Much safer for parts that shouldn’t or can’t have any sand in the moving/working parts. It’ll make your projects so much easier.
Vapor blasting is perfect for those wanting the metal to look like new, but it is not recommended for powder coating as it doesn't provide enough profile for the powder to bite into. Dry blasting with proper masking is the way to do it.
You're not supposed to turn brembo rotors due to the fact they're closer to min spec plus the more aggressive pad. I've sanded some with a 220 grit to remove the layer of the old pads and put another hard 18k on em. Yet if you're using the same pad as the old one....doesn't matter
i used to think Devin was lucky to have Bobbi, now im starting to feel like Bobbi is lucky to have Devin
receives free powdercoated calipers, whines at the end of the video for him to finish talking
@@Llando You aint ever been grumpy before?
That was slightly aggressive but hangry girlfriends bro.... they be on some shit
Can they be lucky to have each other
yes lol
Always gotta love a good video while sitting down and eating 😎 Good video Devin keep it up ✊🏾
Yeah bro. I take lunch at 2 every day. Always eat while I watch Devins vids
They perfectly match the red STI badge on the fender, I think they look awesome, plus Bobbi is happy so it was a good day
Great video!
Devin really wanted the brembo decal in white and in my opinion they would look and pop more, but it’s her car!
Man every time I see the notification for your uploads it brightens my day
You need to do stainless steel brake hoses on the STI, trust me 10000% worth the money, just did mine and now it’ll throw you into the dash if you slam em, they’re insane
I’ll love to see hyper blue evo8 vs Subaru sti Gary
I agree on this @devin
I like how the red brakes now match the red STI on the fenders!!
yooooo the red POPS! can't wait to see more progress! i saw that black evo sitting outside, can't wait to see that built too!
Its one of the most beautiful sti i have ever seen. 😍 congrats
I would love to see a comparrison between the powder coats. One with the silver base and one with the chrome base covered in that red.
Go on prismatic powders and click lollipop red and they have a gallery
Chrome based definitely would have given it more of a pearl escent pop to it, I do agree. 👍🏻
Looks awesome im with Bobbi black stickers looked the best.
Finish work, come home boom watch some Devin 👌🏽 prefect way to end a night. Keep up the dope content bruv ✊🏽
The sti is looking and going epic. Can't wait to see you doing a built motor and sending it to the moon.
Why did I hold my breath at 8:27 like I could actually smell the powder coat stripper 😒😂 I’m too dedicated to this Vasyn lifestyle 🤟🏼
Black decals for sure!
Yeah red calipers for Gary was DEFINITELY the right CHOICE Bobbi👌🏻😎.
Beautiful color for the calipers
That silver powder looked sweet too buuuut the red for the WIN!!!
Looks great, a lot nicer than the silver. Black stickers for sure.
Gary is a ripper now😍😍😍
I can see the air filter through the wheel well! May b time to put back those fender liners.
black calipers with red stickers would be evil🤘
Brembos brakes looks really wonderful💯
Looks awesome… definitely the white brembo stickers. But black look good. Just my personal preference. White definitely shows up more👍
that brembos are monoblock ,means that they are made from one block of aluminum more stronger than the 2pc ones ,and more expensive
The white Brembo stickers pops way better than the black. You sould go with the white over the black.
i miss the EVO X! we need more evo content
The red pops looks prrrrrrrretty 😎😎😎
the black evo needs some love
Those brembos are nutty as hecc
Black or white Sti stickers would look sick on the brembos
I want Devin to replace the EVO 10 Clutch and race Gary 🔥❤️
I literally did this yesterday and didnt see you put this video out and shot one of my pistons out🤦🏽♂️ My calipers dont separate either
Lets go get this vid to 10k+ likes, loving these vids
(Bobbi) *points at caliper* “do you know how to get these off? HAHAHAHAHA
Haha did she see the evo 8 build man knows everything
Please excuse me if I've missed something, but what is in the yellow drum to strip powder coatings etc. Cheers UK out👍
Woooow bobby rules ... thanks for the video dude.
I was doing a last minute brake job and ran out of fluid. Turns out most gas stations sell fluid and the one near me even had DOT 4 which I was needing for mine. Just a thought in case this ever happens again!
Also Walmart was still open. But Boss Bobbi was hungry so it wasn't going to get done anyway. 😡😡😡. Those 2 make a great couple.
Hello greetings from Colombia I like your videos sa
You should invest in a Vapor Honing machine next! Much safer for parts that shouldn’t or can’t have any sand in the moving/working parts. It’ll make your projects so much easier.
Vapor blasting is perfect for those wanting the metal to look like new, but it is not recommended for powder coating as it doesn't provide enough profile for the powder to bite into. Dry blasting with proper masking is the way to do it.
I can never find a place to buy oem sti brakes for a 2020 wrx
Like the new caliper colour
Could you recommend me where to buy the pads for my subaru sti is the same as the one you have. ventilated discs and 6-piston calipers
Devin the code for the ceramic coating isn’t working .. devin25 says invalid code
The spec c type ra r gdb chassis have those brakes,
The Brakes on the RA-R are superior to the 2018+ 6 piston/ 2 piston brakes.
Hello this is a great video.👍
Haha sweet to know you used the air method i suggested
where is the powder coat stripper from?
Gary is lookin 💯🔥🔥🔥🔥🔥🔥🤘🏻😁
You should race bobbi SUBI vs the blue EVO
Was off youtube for a bit.. when did Devin move to this shop ?
A couple months ago
Anybody know what paint stripper he use?
How does the the powdercoating hold up?
Loving it man
Hey man @DEVIN. Just curious where you go to get stickers made.
Great job, for the finish Black those turninglights on the Fender out....Orange sucks😂😂😂🤘 peace out nice greets from germany ✌
Why did you stick to DOT3 when you could've upgraded to DOT4?
Bro, the struggle is real I cannot get anyone in Colorado to turn my sti rotors
When are bobbis summer wheels going back on?
They look beautiful but white stickers for sure!
You're a BEAST MAN!
Yo what dryer system do you use for your air? I can’t keep moisture out of my sand blast cabinet
What kind of front lip is that? Look mint asf!!
I love how upset he is about the rotors 💀🤣
Well yeah those pads are kinda expensive. It’s a waste putting them on shitty grooved rotors. Not the end of the world tho
Great guys, love it! I prefer white stickers bobby ;-)
How much for that Evo 9 there
Aren’t those tires directional? Think they need to be switched over :)
Fire!...STRAIGHT FIRE
Fully built bro.
King devin!
Devon does the powder coat oven process affects the durability of the wheels? I want to do mine but live in a place with bunch of potholes.
Whats the wheel spec? Loving the fitment on Gary 🥲
Bro, in general what price is an evo 10 stock ?
wheel specs on the STi?
Time for 4 RHH maaaaaam!!!!!
What turbo does it have?
the og powdercoat would have faded anyway. You would have needed to do this in the future anyway. Good call!!
Shoulda did Grey Brembo stickers
Can you please do chrome breaks one day
When you gonna change the clutch on the evo10 she wants it
She waz right they look awesome 👍
You're not supposed to turn brembo rotors due to the fact they're closer to min spec plus the more aggressive pad. I've sanded some with a 220 grit to remove the layer of the old pads and put another hard 18k on em. Yet if you're using the same pad as the old one....doesn't matter
She was definitely hangry at the end 😂
i think it’s time to get your girl a set of rs05rrs 👀 or ZE40s 🔥
The grey color of the car would look good as the sticker color too.
The white would have looked better but the car is still sick af
Wasn't the biggest fan of the paint color on Gary, but to see her all done, it looks pretty sick. Bet Bobbi doesn't miss Genny in the least?
Bobbi was right. Red w/black looks killer.
White decals looked better good call Dev, bad call Bobby XD
You dipped your calibers in what? Lol I need that stuff
B17 stripper
White stickers!!!
Evo 10 clutch... >.< It has been bothering me for months now. Please replace it!
Damn Bobbi!!!
CLOSE IT OUT! That told you Devin !🤣🤣🤣
I think the white stickers
White sticker😍
White Decals!
My only criticism is the brembo sticker is huge
Should I sell my high end pc to go full bolt on and tuned on my G37? 💀💀
Built my pc at the end of April this year but I been wanting to do more to my car :(
@@user-lz3xp7xd5r screw a pc go fbo
@@EsePlebeJosee you right. Putting my shit on OfferUp