I'm not sure if you took the effort to do it or if the recording equipment you are using did it, but I can't even express how nice it is to have the impact sounds not be 10x the volume of everything else. Great video for me to double check my work fixing a leak on my new to me FXDX.
I did mine twice and finally brought it to a mechanic. Turns out i was using the wrong seal and it was leaking on the outside of the seal. If I ever have to do it again I think I'll epoxy the outside edge
Anyone know where to buy that monster of a deep well socket??? I'm currently stuck at this step to get the sprocket off and I can't find anything anywhere. HELP!!
@@GilstrapGarage well good choice I believe Warren Buffet still lives there I would like to get out of California when I retired btw do you know a good mechanic I live in ontario cal my 2013 dyna idles to high when i come to a stop or sitting at a red light i took it to dealer n they supposedly fix it but a week later problem came back.
Bro I swear I have had more issues with the primary/tranny on my 2008 FLHRCI that I’m about to just sell the damn thing. One fkn thing after another Leaky inner primary .. nah it was blown compensator that fucked the entire clutch assembly. .. few weeks later .. buzzing in the clutch lever and some leaking fluid .. did the shop fuck ip? Nah.. it’s a bad bearing and seal on the tranny. Fortunately they are eating the cost to get to the tranny to handle that .. said can’t know for sure til they get in there .. before he got “rebuild” half way out his mouth I damnnnear lost it if anything gets a new tranny it’s my 2023 RG with the 124. Not my old bar hopper I got for $6500 that’s landed up with 5k worth of repairs been in shop more time than on the road (when I checked it out and rode it .. nothing felt off. No tell tale signs of comp issue).. oh yea and a fork seal started leaking after riding it for maybe 500mi. One fkn thing after another. It sucks that I really like that bike too. 16” Carlinis, 555 cams, 2-1 exhaust.. she rips for an old 96TC
Suggestion on removing the crank Nut. Do not use an impact wrench. It might crack the stater magnets.
Great work! I heat up the seal rings and they come right out. Food for thought.
I'm not sure if you took the effort to do it or if the recording equipment you are using did it, but I can't even express how nice it is to have the impact sounds not be 10x the volume of everything else. Great video for me to double check my work fixing a leak on my new to me FXDX.
🤣🤣 yeah I usually try to turn down the louder noises so it’s not obnoxious. Thanks for watching man 🤘🏻
I did mine twice and finally brought it to a mechanic. Turns out i was using the wrong seal and it was leaking on the outside of the seal. If I ever have to do it again I think I'll epoxy the outside edge
Racheting snap ring pliers !
Gotta get a pair
I juse replaced all those seals in there and its still leaking. I might go back in and try packing that main shaft seal full of grease this time.
Lol ” I’m scared of breaking my tool” instead of breaking the bolt lol
Maaaan to hell with that bolt lol. I hate breaking those ball ends hahah
Lmfao 🤣 facts
I got some transmission fluid sitting up on the other side
Trying to figure out why
I have fluid coming out of the exit house of the transmission. Do you know why this is caused?
What size sockets for the clutch and compensator?
Does that Jim's bearing work on an '02 Softail?
Yeah it will
@@GilstrapGarage thanks. I already got them and had them installed
I can't find part 2. Can you tell me what it's called so I can pull it up? Thanks!
GREAT UPGRADE FOR YOUR HARLEY DAVIDSON!
ua-cam.com/video/CM8fpwnbvNI/v-deo.html
Good shit. Needs this
🙌🏻
What bearing upgrade kit? Parts number please?
Google “inner lrimary sealed bearing”
You can find fitment for your bike. They don’t make them for 06+ though
Anyone know where to buy that monster of a deep well socket??? I'm currently stuck at this step to get the sprocket off and I can't find anything anywhere. HELP!!
Look up “main shaft sprocket/pulley socket” on Amazon. There is one for 5 speed transmissions and one for 6 speeds. They run like $30-50
@@GilstrapGarage You are a LIFESAVER
I got mine on ebay
Race puller tool as well about fifty dollars for the to Of them
Nice. Compliment from Italy.
Hi Brandon where are you located? Im in search of a great mechanic
I’m in Victorville California. But we’re moving to Omaha NE in the next couple weeks
@@GilstrapGarage well good choice I believe Warren Buffet still lives there I would like to get out of California when I retired btw do you know a good mechanic I live in ontario cal my 2013 dyna idles to high when i come to a stop or sitting at a red light i took it to dealer n they supposedly fix it but a week later problem came back.
Awww man, you ruined the bearing! Naw man, just messing with ya! Nice job. Everybody thinks this shit is easy! Sometimes ya and sometimes na!
Good job 👍🏻🇦🇺
Thanks!
Bro I swear I have had more issues with the primary/tranny on my 2008 FLHRCI that I’m about to just sell the damn thing.
One fkn thing after another
Leaky inner primary .. nah it was blown compensator that fucked the entire clutch assembly. .. few weeks later .. buzzing in the clutch lever and some leaking fluid .. did the shop fuck ip? Nah.. it’s a bad bearing and seal on the tranny. Fortunately they are eating the cost to get to the tranny to handle that .. said can’t know for sure til they get in there .. before he got “rebuild” half way out his mouth I damnnnear lost it if anything gets a new tranny it’s my 2023 RG with the 124. Not my old bar hopper I got for $6500 that’s landed up with 5k worth of repairs been in shop more time than on the road (when I checked it out and rode it .. nothing felt off. No tell tale signs of comp issue).. oh yea and a fork seal started leaking after riding it for maybe 500mi.
One fkn thing after another. It sucks that I really like that bike too. 16” Carlinis, 555 cams, 2-1 exhaust.. she rips for an old 96TC
Damn it! Sounds like a sweet bike, but I swear some of those things just have gremlins in ‘em
Annnnnnd theeeen? 😂😂😂
That’s all I can think of any time I say that 🤣
I would never buy a Harley Davidson they are money pits.
I hate when my bit is worn out!