Love stained glass. It always helps to see how other people do the various parts of glass and to pick up something new or see how each step is demonstrated. You never know, it might help to try a newer technique. Thank you for today.
My pleasure, and thanks for your comment. It means a lot to hear from you and know that you're watching. We try to make our training relevant and entertaining.
This is like my 3rd time I watch ur Videos, so helpful. Like this Foiling...so important. We all handy people..but watching how U doing it....helps so much. This Video helps mo' than reading it from a book. Thnks for your time..!
Thanks, I often wonder if what we teach might be so simple that it's obvious and it probably is. But stuck in there you may find something that's useful. ❄❄
Total "Wow Moment" when you used the edge to tear off the end. I've be laying down the peaces on one side to use scissors to cut and it has made a mess several times.
One of my "talents" is that of finding easier ways of doing things (some would call that lazy) So I found that tearing the foil off as if on a tape dispenser. Thanks for noticing!
I have been doing this for 10 years and always thought my joints were sometimes to far apart. After watching this video I see that yours look like mine. I now feel better about my work since it is comparable to a professional craftsman like yourself
We have built panels that were tighter and some that had even wider gaps. What's great is that if you make the gaps equal, the eye doesn't pick up the imperfections.
Love your video’s and I’m sure they have saved me from making many mistakes and I love learning to do stained glass the correct way. What I would love to see is a video showing how we can make our own hangers because the hangers you buy are so expensive.
CAn you show a video of the different looks of soldered and patina copper foil? I use black backed copper foil as that is what my instructor showed me to use. I see you are using a clear copper foil. Does this effect the look of solder and patina when you are finished?
The only time we use black backed foil is when we're doing work with clear glass that will be patina'd black..same with silver backed on clear that will remain silver..this is just to keep the color from detracting from the overall look of the finished piece. When we started in stained glass, there wasn't any black or silver backed foil that came years later. Back then we just exercised patience because the copper foil would darken over time and you wouldn't see the copper peeking through.
The one tip I have is that if you start soldering a Tiffany shade, finish it right away. I once did one halfway, but ran out of solder. So I couldn't finish soldering it right away. The solder got corroded and was difficult to work with once I got back to it!
We're not in the habit of using black backed foil. It didn't exist when we started with stained glass and we've noticed that foil changes color on the inside over time so we don't worry so much about it. But it's fine to use it if you want that bit of color difference right away 😀
I re-watched the video and found that the "babbling was in the form of instruction. I was actually giving instruction at all times about foiling and it seemed pretty comprehensive. That might seem like too much if you are already experienced, but beginners find it helpful if I cover the subject completely.
@@GommStainedGlass Since I have been doing stained glass for a couple of years, you will of course go over things I already know. That is fine with me because sometimes I need a refresher and you always have a little gem of information that I appreciate. That is when I say to myself, "Oh, that is how you do that!" How wonderful that is. Thank you.
@@Madrushka Thanks, for your support. Not every word is a gem of wisdom. Sometimes folks forget that because of the nature of the no-cost nature of UA-cam video's, we can't possibly edit to perfection or avoid repetition. Our first video that we still sell on Amazon took a year and a half to create and still details got left out during the editing process.
Love stained glass. It always helps to see how other people do the various parts of glass and to pick up something new or see how each step is demonstrated. You never know, it might help to try a newer technique. Thank you for today.
I totally agree!
Enjoy your straight forward, relaxed approach. Looking forward to watching more of your videos. Thanks!
Thank you, they aren't all winners, but we occasionally do a good video 😬
Thank you so much! I always learn something new from your videos!
You are so welcome! I thought that video was particularly good!
thanks you so much, greetings from México, I'm about to start on this stained glass journey and your videos have given me cool tips!
Wonderful!
Your videos are very helpful. I am fairly new to stained glass and need some help. Thank you for sharing.
You are so welcome!
Thankyou guys this was another great video Thankyou for sharing 😊
Some techniques are easy, yet need a little explanation. Thanks.
❤your videos have learned so much thank you.
Thank you!
Very helpful video! Thanks!
Thanks, we appreciate your comment 😀
Thank you for your videos. I am very much a novice but am loving this new hobby. Thanks for showing your techniques, very helpful.
My pleasure, and thanks for your comment. It means a lot to hear from you and know that you're watching. We try to make our training relevant and entertaining.
great demo! Easy to follow directions. Thanks!
Thanks Dottie, sometimes we hit the mark better than others!
you're doing a very good job in all your demonstrations, thanks for all your tips
Thanks John, I was shocked when I uploaded the video and it was 20 minutes long!
This is like my 3rd time I watch ur Videos, so helpful. Like this Foiling...so important.
We all handy people..but watching how U doing it....helps so much. This Video helps mo' than reading it from a book.
Thnks for your time..!
Thanks, with a little practice we can all become very good at foiling! 😀😀😀
Thank you very much,the video was very well done
Thanks, it just takes a bit of practice and an appreciation for the detail that it takes to keep the foil the same on both sides.
Thank you, I Really enjoy your video tutorial
Thank you!
Great ideas
Thanks, we like to share!
Very helpful!
Thanks, I often wonder if what we teach might be so simple that it's obvious and it probably is. But stuck in there you may find something that's useful. ❄❄
Great tips, thanks for sharing!
Our pleasure. 😃😬😄😆😁
Total "Wow Moment" when you used the edge to tear off the end. I've be laying down the peaces on one side to use scissors to cut and it has made a mess several times.
One of my "talents" is that of finding easier ways of doing things (some would call that lazy) So I found that tearing the foil off as if on a tape dispenser. Thanks for noticing!
It's fun and I learn a lot watching your videos! Thank you for taking the time to make them.
Thanks, it's fun for us as well, that's why we keep it up!
Hello, I just bought soldering iron but do not know if it can be used for soldering of the stained glass. Need your advice.
It depends on how hot it will get and the size of the tip. You'll know as soon as you try it...good luck
On the foiling of the long piece and the foil twisted I am glad to see how you fixed it
We often learn by doing!
Thanks! Your lessons are very useful!
the more the better, I enjoy them
We find joy in sharing stained glass knowledge
I have been doing this for 10 years and always thought my joints were sometimes to far apart. After watching this video I see that yours look like mine. I now feel better about my work since it is comparable to a professional craftsman like yourself
We have built panels that were tighter and some that had even wider gaps. What's great is that if you make the gaps equal, the eye doesn't pick up the imperfections.
Love your video’s and I’m sure they have saved me from making many mistakes and I love learning to do stained glass the correct way. What I would love to see is a video showing how we can make our own hangers because the hangers you buy are so expensive.
We show how to make your own rings on video ua-cam.com/video/jzSB_QZbk0o/v-deo.html
CAn you show a video of the different looks of soldered and patina copper foil? I use black backed copper foil as that is what my instructor showed me to use. I see you are using a clear copper foil. Does this effect the look of solder and patina when you are finished?
The only time we use black backed foil is when we're doing work with clear glass that will be patina'd black..same with silver backed on clear that will remain silver..this is just to keep the color from detracting from the overall look of the finished piece. When we started in stained glass, there wasn't any black or silver backed foil that came years later. Back then we just exercised patience because the copper foil would darken over time and you wouldn't see the copper peeking through.
Do you have tips on completing Tiffney lamps
The one tip I have is that if you start soldering a Tiffany shade, finish it right away. I once did one halfway, but ran out of solder. So I couldn't finish soldering it right away. The solder got corroded and was difficult to work with once I got back to it!
Muy bonito, me encanta el cristal yo también lo hago, es mi Jovi favorito 😍💕
Thank you, we loved doing the demonstration! 😃😃😃
Hi, how do you calculate how much foil you would use on a project, for quote purposes?
We figure 1 roll per panel, which is usually way more than we need.
I cover my pattern with clear plastic until it's time to solder.
That's a novel idea that I've never heard of before. Thanks for sharing. 🙂🙂🙂
I laminate the pattern I am working on. Print shop will do larger ones (i can only do 12x19 at home).
Walmart sells clear plastic cheap and when it's all done, I can wash it or throw it away and then roll up the pattern easily for storage.
Why didn't you use black backing for that clear glass you just foiled.
We're not in the habit of using black backed foil. It didn't exist when we started with stained glass and we've noticed that foil changes color on the inside over time so we don't worry so much about it. But it's fine to use it if you want that bit of color difference right away 😀
Good instruction but a hell of a lot of babbling.
Need better editing
I re-watched the video and found that the "babbling was in the form of instruction. I was actually giving instruction at all times about foiling and it seemed pretty comprehensive. That might seem like too much if you are already experienced, but beginners find it helpful if I cover the subject completely.
@@GommStainedGlass Since I have been doing stained glass for a couple of years, you will of course go over things I already know. That is fine with me because sometimes I need a refresher and you always have a little gem of information that I appreciate. That is when I say to myself, "Oh, that is how you do that!" How wonderful that is. Thank you.
@@Madrushka Thanks, for your support. Not every word is a gem of wisdom. Sometimes folks forget that because of the nature of the no-cost nature of UA-cam video's, we can't possibly edit to perfection or avoid repetition. Our first video that we still sell on Amazon took a year and a half to create and still details got left out during the editing process.