I did it and the mosfet fried. Do you have any idea? I don't like to use mosfets because they are very sensitive to static. it would be possible to use a bjt, like the tip3055 with other zener and resistors values??
I have an old 1920s radio that used to run on DC power. Would this be OK to implement this to control the radio? To the radio I need a 90 V, 20 roll and a 6 V. Thanks Molly this looks awesome I hope this will work for me. Any thoughts on having it work with the radio and could I do a fixed output and said he’s in a potentiometer
Good day, can I try this app on treadmill engine? engine information model 105zyt-1 200v 2.0 hp 3600 rpm 8.5 A . Previously, I connected a 40n60 IGBT cooler and a 320 ohm resistor to the 500k ohm potentiometer legs. I connected the bulb as a load from the output and it worked, but when I connected the motor, the IGBT malfunctioned. Can you help?
what happen if i dont use mosfet ? i got a 5010 and 100k ohm potentiometer can i still use it for controlling the output voltage or not, and if i can whats the downside ?
Hello Ali, I would have an assignment if you are able to design something like this that is also stable and can hold the current. Situation, alternating voltage 115 volts, but very unstable. I need an AC amplifier with stabilization without additional power supply. Input voltage between 40 and 130 volts with 60 amps. To generate 230 volts we have a transformer, the same problem exists here too, here too there should be a 230 volt stabilizer with 30 amps for three air conditioning systems, and PCs with 230 volts. We also use a transformer for the 115 volts. If possible, I want to use this component for 115 and 230 volts. Once for the 115 volt side, the second component for the 230 V stabilization. I'm thinking of very strong Mosfet transistors, but they shouldn't be fancy types, so they should be easily available. No SMD components either, normal components. I've already bought two such devices to test, they were cheap but didn't work as expected. Let me know if you think you can do it. If you can come up with an idea and a circuit diagram that really works then you will of course get money from me.
Hi mate it is safe for control bldc motor 200v?? So the input for driver motor need 180-200v dc. It is safe?? And the motor around 5-10A max sir.@@TricksOfAli
Hello sir can i use 90 volt (30 amp) Dc battery input and give output 60 volt (20-30 amp) ? I will connect boost converter (1500watt) at this voltage regulator circuit and i required max 60v input but i have 90volt 30amp battery . I want 90volt reduce to 60volt for operating boost converter 1500watt. Can i use voltage regulator circuit for this.
hola. una pregunta. tengo una fuente con transformador de 115 vac a 80 volts mas el capacitor filtro se eleva el voltaje hasta 120 vdc. tu circuito con mosfet entrega voltaje de o120 volts pero sigue sin filtrar. con media onda. pregunto puedo ponerle un filtro a la salida del mosfet para tener voltaje de dc pero limpia. sin que varie el voltaje con la carga. gracias. sr. Ali.
As a professional engineer, I would strongly advise that you do NOT build or use such a potentially lethal power supply. This video should be removed from public view, before some innocent novice or user gets killed.!
Dear friend, you can use a buck converter, but the control circuit requires a voltage of 12 volts. In general, this method is not recommended because a completely new circuit must be designed for this purpose
That's a nice queastion if u use diode to make a gratz-bridge you have a 200v but if u want to step down the voltage use resistors maybe like 300k Ohm and you get 60v use a fet to stabilize the voltage and a potmeter and thats all.
I've made it, but why did I give it 1 dynamo load with a voltage of only 12v, the mosfet immediately heated up quickly in seconds even though I had given it a very large and thick heatsink.
Sim, este circuito é mais adequado para controlar a velocidade de motores com a mesma tensão da fonte de alimentação, e não de LEDs de baixa tensão. English: Yes, this circuit is more suitable for controlling the speed of motors with the same voltage as the power supply, not low voltage LEDs.
This video is insanely dangerous. Wheres the warnings? What if a young kid decides to build it, just starting out into electronics, and unknowingly kills themselves through your stupidity?
@@mdsohelranarana91Hi mate it is safe for control bldc motor 200v?? So the input for driver motor need 180-200v dc. It is safe?? And the motor around 5-10A max sir.
I did it and the mosfet fried. Do you have any idea? I don't like to use mosfets because they are very sensitive to static. it would be possible to use a bjt, like the tip3055 with other zener and resistors values??
Amps ?
I have an old 1920s radio that used to run on DC power. Would this be OK to implement this to control the radio? To the radio I need a 90 V, 20 roll and a 6 V. Thanks Molly this looks awesome I hope this will work for me. Any thoughts on having it work with the radio and could I do a fixed output and said he’s in a potentiometer
tres ,tres interessant ,choukrene .....
The mosfet fry immediately u use it to power a 12v dc motor or charge a battery at 12 volts
Great circuit
Thanks 👍
good job. I got lowest V = 6v when input 110vac, is the 560K Ohm Resistor essential？ how to calculate it?
Bhai isme 60N60 MOSFET lghye to amp capacity 60 ho jayegha mghr circuit pr ko effect pdegha kya
Hello, can we use K3569 mosfet
I think the dc output voltage will have ripples as you have not connected any filtering capacitors. Please confirm if the output has ripples or not.
just add a couple 400v 1000uF caps
Instead of using variable resistor at input, if we use it at output to regulate the voltage, what will happen?
why you use zener diod ?
Is this circuit has good efficency ? Does it produce high heat ? Thank you
Hello, dear friend. This circuit is a good choice for controlling 220V motors, but this circuit is not useful at low voltages due to high energy loss.
what is good for low voltage? 220 to 30 ? is any recommended for it?
can i use this circuit to reduce a 900vac to 900 vdc?
Can carging lifpo4 20s?...
Good day, can I try this app on treadmill engine? engine information model 105zyt-1 200v 2.0 hp 3600 rpm 8.5 A . Previously, I connected a 40n60 IGBT cooler and a 320 ohm resistor to the 500k ohm potentiometer legs. I connected the bulb as a load from the output and it worked, but when I connected the motor, the IGBT malfunctioned. Can you help?
Please, can I use this circuit to reduce a 480v AC to 460v.
Thanks
what is the highest current I can get continuously
Hello, dear friend. This circuit is a good choice for controlling 220V motors, but this circuit is not useful at low voltages due to high energy loss.
Can i make a variac like this
what happen if i dont use mosfet ? i got a 5010 and 100k ohm potentiometer can i still use it for controlling the output voltage or not, and if i can whats the downside ?
its triac not mofset...
Hello Ali, I would have an assignment if you are able to design something like this that is also stable and can hold the current.
Situation, alternating voltage 115 volts, but very unstable. I need an AC amplifier with stabilization without additional power supply. Input voltage between 40 and 130 volts with 60 amps.
To generate 230 volts we have a transformer, the same problem exists here too, here too there should be a 230 volt stabilizer with 30 amps for three air conditioning systems, and PCs with 230 volts.
We also use a transformer for the 115 volts.
If possible, I want to use this component for 115 and 230 volts. Once for the 115 volt side, the second component for the 230 V stabilization.
I'm thinking of very strong Mosfet transistors, but they shouldn't be fancy types, so they should be easily available.
No SMD components either, normal components.
I've already bought two such devices to test, they were cheap but didn't work as expected.
Let me know if you think you can do it.
If you can come up with an idea and a circuit diagram that really works then you will of course get money from me.
Hello, I would be happy to help you. Can you give me more information about 115V electricity? Where does the electricity come from and...
Hi mate it is safe for control bldc motor 200v?? So the input for driver motor need 180-200v dc. It is safe??
And the motor around 5-10A max sir.@@TricksOfAli
Hello sir can i use 90 volt (30 amp) Dc battery input and give output 60 volt (20-30 amp) ?
I will connect boost converter (1500watt) at this voltage regulator circuit and i required max 60v input but i have 90volt 30amp battery .
I want 90volt reduce to 60volt for operating boost converter 1500watt.
Can i use voltage regulator circuit for this.
The voltage regulator is not suitable for high powers because it has a lot of energy loss. What model of boost converter do you use?
For Low Current?
Hello, dear friend. This circuit is a good choice for controlling 220V motors, but this circuit is not useful at low voltages due to high energy loss.
Mossfet or potentiometre k beech wale resistance ki value kya h
470k pot and 1m resistor
What if I did not include the rectifier?
Hello. How would I add a variable current to this circuit.
hola. una pregunta. tengo una fuente con transformador de 115 vac a 80 volts mas el capacitor filtro se eleva el voltaje hasta 120 vdc. tu circuito con mosfet entrega voltaje de o120 volts pero sigue sin filtrar. con media onda. pregunto puedo ponerle un filtro a la salida del mosfet para tener voltaje de dc pero limpia. sin que varie el voltaje con la carga. gracias. sr. Ali.
itu kalo buat beban beban besar kuat ga kaya gerakin modor dc
As a professional engineer, I would strongly advise that you do NOT build or use such a potentially lethal power supply. This video should be removed from public view, before some innocent novice or user gets killed.!
As a professional engineer I absolutely agree 👍
yes,
Ya lo hice y trabaja solo que el transistor mosfet se calienta demasiado.
Hocam bu devreye akım sınırı akım ayarı nasıl ekleyebiliriz
Which Changing will b occur when we convert 220 Ac to 0 to 10p dc
Hello, dear friend. This circuit is a good choice for controlling 220V motors, but this circuit is not useful at low voltages due to high energy loss.
Energy hilang bagaimana, tolong jelaskan
It would be better to add an filter capacitor and zenor diode
Amper,Akım gücü ne kadar?
Hello friend can i put supply 110v to this?
Yes you can
Hello Brother
What program did you use to edit the clip, especially to introduce the parts?
i use Adobe Premiere Pro
Need load?
Hello, dear friend. This circuit is a good choice for controlling 220V motors, but this circuit is not useful at low voltages due to high energy loss.
Kittney watt ki power supply hy ye?
What is the maximum current?
How much amps i will get from this circuit?
يعتمد على درجه تبريد الموسفت
en mi pais la energia domestica es de 120v AC...funcionara igual
Si, con la diferencia que su voltaje de salida es de 0 a 100 voltios
sir how to make 200 v dc input and 60v dc output variable power supply please give me solution for this i am searching this solution for an month
Dear friend, you can use a buck converter, but the control circuit requires a voltage of 12 volts. In general, this method is not recommended because a completely new circuit must be designed for this purpose
That's a nice queastion if u use diode to make a gratz-bridge you have a 200v but if u want to step down the voltage use resistors maybe like 300k Ohm and you get 60v use a fet to stabilize the voltage and a potmeter and thats all.
o como estabilizar el voltaje de salida que no haya fluctuaciones de +/- un 10 % gracias.
How to control current IGBT circuit.
mosfet use N Chanel or P Chanel?
use N chanel MOSFET
I've made it, but why did I give it 1 dynamo load with a voltage of only 12v, the mosfet immediately heated up quickly in seconds even though I had given it a very large and thick heatsink.
do I have to add a few more of the mosfet so it doesn't get hot easily?
Hello, dear friend. This circuit is a good choice for controlling 220V motors, but this circuit is not useful at low voltages due to high energy loss.
@@TricksOfAli Yes, so can the MOSFET be paralleled and does it require other components?
Is safe used for impact drill without over heat? Tx u sir 🙏
Yes, you can use this circuit. And use the following circuit with a heatsink.
ua-cam.com/video/92Fm1NUNEfg/v-deo.html
پس دیود هرزگرد کوش کجاست اینجوری که اگه به یک موتور وصل کنی میسوزه ماسفت
in this video ac to dc but i have only dc and i want to step dawn this voltage
Maybe this will help. A standard SMPS will take DC as input voltage, I think.... look at this to learn more: ua-cam.com/video/9bFVTa8FEM4/v-deo.html
I make this Circuit but DC + & - shows full current. This circuit dose not work is this fake ??????? Please reply
Fiz esse projeto nem led de 50 watts aguentou
Explodiu mosfet
Sim, este circuito é mais adequado para controlar a velocidade de motores com a mesma tensão da fonte de alimentação, e não de LEDs de baixa tensão.
English:
Yes, this circuit is more suitable for controlling the speed of motors with the same voltage as the power supply, not low voltage LEDs.
Tiene miedo al regular el potenciómetro amigo 😂
Bro can it use DC motor up to 10A
Max amps i mean with max volts
很危險！可隨時會觸電死亡！
Bro it's risky
Hi dear friend. Yes, 220V power is risky, but this circuit can be a good speed control for dc motors, and it also works better than a dimmer.
This video is insanely dangerous. Wheres the warnings? What if a young kid decides to build it, just starting out into electronics, and unknowingly kills themselves through your stupidity?
As a electrical engineer 😘 it's not risk bro
@@richardohare7708 😂 warning won't prevent kids from building it
@@mdsohelranarana91Hi mate it is safe for control bldc motor 200v?? So the input for driver motor need 180-200v dc. It is safe??
And the motor around 5-10A max sir.
You should teach how to connect the bridge plug in Figure 3:16
connect +to + and -to- and ~~to ~~
Can I use a normal power plug instead?
What is the name of the device like in the picture?
@@TricksOfAli
پس دیود هرزگرد کوش کجاست اینجوری که اگه به یک موتور وصل کنی میسوزه ماسفت
ایشالا که نمیسوزه آقا سعید سری بعد هرز گردم میزاریم🙏😁
作者十分無責任感，自己未做過試驗就憑空想象推出，最慘是會死人的也不管，真無道德！害人害物！