It's amazing how fast the battery power can go down and it's noticeably slower below 50 percent juice. Hopefully, Xiaomi creates an upgraded battery pack that can hold much more power
I have a 16349 m365 and was able to successfully downgrade BMS to 107, downgrade DRV to 140 and flash with 200CFW. Scooter is working as expected and is noticeably higher performing in acceleration and braking. Thanks for the great tutorial and file names!
Doug and Gerasimos, it seems that with version 142 you cannot easily downgrade. Even if you apply custom firmware with 1.3.6 with patched m365 downG. Any help?
Doug and Gerasimos, it seems that with version 142 you cannot easily downgrade. Even if you apply custom firmware with 1.3.6 with patched m365 downG. Any help? It seems to flash but with no results.
@@georginaouas φιλε μου εκανα ακριβως τα βηματα οπως το περιγραφει. εβαλα το cfw200_w. Η επιταχυνση μου εγινε αισθητα πιο καλη. σχεδον σπιναρει απο σταση σε φουλ ανοιγμα. Η μπαταρια πεφτει πολυ πιο γρηγορα (λογικο) αλλα δε μου λειτουργει το κλειδωμα. Μεγαλη διαφορα στις ανηφορες. μου εχει δωσει 3 χλμ οερισσοτερο ταχυτητα σε ανηφορα 8%. το θεωρω μεγαλη διαφορα.
Σε ευχαριστώ για την απάντηση! Λίγο για τη μπαταριά το σκέφτομαι(είναι τόσο χάλια???)... Και να σε ρωτήσω κάτι ακόμα, αν θέλεις μπορείς να κάνεις restore στο δικό του firmware?? Ευχαριστώ πολύ και πάλι!!!!@@BarchettaClubGreece
Thanks Doug. Took some bits from you and some from Rollerplausch been test driving today. 43.1km I got out of it. Did not believe it at first so I then used 3 different speed apps and it’s doing 40km an hour. Supper happy hope it lasts
It works for my Amazon bought US Version. Had to downgrade from 1.42 to 1.40 doe cuz I upgraded right out of the box then. Feels slightly faster~ about 3mph more for me and hill climbs are definitely better. Update: Tested it out to go to work today WITH the mod for the first time. My ride to work is 5 miles (8km) one way. For the mod, I used the 200CFW_W, and I was averaging around 19.5mph (31km/h) and passing a lot of bicyclist with some saying my scooter is fast! Average temperature of my vehicle was at 80 degrees fahrenheit (which is 26 celsius i think) when I got to work and parked it at my cubicle. However, that's with the outside morning temperature of 36 Fahrenheit which is 2 celsius. Overall, I am happy with the firmware mod, and thanks Doug for the great tutorial vid!!
Note that with these electric motor attached to tire, the tire under heat expands/higher psi. My Segway pro had tire bubbling issues because of this heat. Probably cheap rubber being a big issue. I put in bicycle tubeless sealent to seal the microscopic holes.
OH. It's work . I'm buy m650 yesterday, and found your vid today . My hands louse control ,then click ,load and finish flash. It work for me. Thank a lot. Bms v.115 Ble v.72 Drv v.138 Batt date 13/6/18
Thank you! This works exactly as you described, but after using 107 + CFW, I switched back to the original settings. I was excited to increase the speed limit, but I found the overall ride requires me to work harder, and be much more alert, especially when breaking / stopping. It's a quicker, but also less enjoyable a ride - for me. Also, it used nearly 2X battery vs factory setting. Thanks again for the excellent thorough video, but a word of caution for those on the fence about this. Glad I tested it, but very glad to be back to original settings.
@@lucavlak4556 with scooter turned off pull the brake and at the same time press Accelerator and turn on you will hear a single beep followed by 4 beeps when you hear that let go and scooter is factory default
Observations with cfw200 & bms107 in a hilly town: -Very noticeable speed and hill incline improvement -Battery life is greatly impacted (50%+), my battery dies on trips that usually left it at 35-40% -Motor is hot when I get home and it takes ~10 min before the scooter accepts charging, this even when it was 11c outside So it's nice but I'm switching back to stock.. it would probably fare much better on flat ground
Hi Doug, it's a great video as always. You won't believe what happened to me (and my Xiaomi scooter). I was riding at 26KM/hr down the road when the handle bar split and cracked (where the folding joint is). Basically the top part oft handle bar was in my hand and the bottom skate board part was separate (except for the cables holding it together)! The bottom part turned left (out of balance) and I kept holding the handle bar confused in that split second as to what happened. I flew 2 -3 meters in the middle of the road. I was SO LUCKY, the the incoming cars all had time to brake and stop and not run over me. I was so lucky because 4 cars had just passed me 6 seconds ago and if that happened, I would be dead. They would run over me unintentionally. Let alone 6 seconds before that I was going down an incredibly-incredibly steep hill and wold have flew from the top of the hill and presumably died from the looks of it. I was on the asphalt, bleeding, unable to speak, unable to think and unable to move. They got down from their cars and carried me to the pavement calling the hospital. Next thing I was in hospital and luckily nothing broken, just my hands and legs are badly bruised and bleeding I cannot walk. I had some stitches, but it's fine.
WOW, im glad you are mostly ok, get well soon! i've never heard of the pivot breaking, im guessing its the main pivot bolt that snapped? i should really check mine. thanks for letting us know!
Hi Doug, thank you so much. I'm recovering physically. I think the psychological part is trickier. I am so grateful that it did not happen down a *very* steep road (18 degrees = 32.9% slope). The thought of that happening is haunting me (think I've got some trauma from that experience). I would have been flying over cars and definitely run over. Yes, you are absolutely right, it is the pivot breaking. I can send you pics to see it. What I am suspecting happened is every time you ride fast we tend to pull the handle bar back especially when you are going down a slope. The issue is it is not supposed to break! They advertise it as secure with it being aircraft grade metal, etc... The max weight is 100KG I presume (or 120)? I am 85KG. So that should be OK. I even bought a second one (as I use it for daily work and having a flat tyre is an issue) but now I don't dare to get on it. You guys need to be careful, it can crack and I'm 85KG.
it happens often and often unfortunatelly. Did you tighten the screw there? i heard that is the main problem, the screw being to tight and folds the pivot. Anyway, i hope you're alright!
Hey guys, many of you would like to try this mod out and dont want to damage your scooter. Simply change into eco mode and eco mode will make a limit of 25 km/h where as normal mode will be 32 km/h with the speed hack. OR If you dont want it then factory reset your scooter.
According to the law, the roller is not a vehicle And he's not a pedestrian. So he's a ghost. And the spirit and the spirit can't be hit. (at least we don't have about any regulation on it yet) .
@@marcelltoth8516 here in England you can get arrested and have thrm confiscated they are vlassed as a motorised vehicle so u need a licence like a bike to ride legally probably because of videos like this
hi i have a pro 2 and i have been trying to upload the firmware but down g will not load the file i have extracted it using jzip but the file looks lite and went you press it downg does not load it. Any help you could give would be greatly appreciated. thanks
Electric scooters are a lot of fun. I usually ride it too. However, Japanese law is strict, so it is difficult. It's a very interesting channel! I am good at shooting videos. With love from Japan :)
I miss Vancouver such a beautiful city. Too bad they've made it impossible to live there unless you want to be a slave to a 1 million dollar home mortgage your entire life.
the app doesnt allow me to select the bin file , it shows its greyed out... i even tryed to copy the zip file into the android and i cant select the bin i also tryed to download the file directly from the phone but when i open the bin all the files i download form the phone are gryed out
Wish I had a phone holder same as yours. Got my scooter today, bought a holder from a local store, and at the first bump my s9+ completely shaderrd, at least only the back got cracked.
Finding out if you have two fuses seemes to be not easy. My serial number is way below the 35000 but the battery production date is 08/2017. I got mine early 2018 and it had BMS 1.1.5 installed. I am pretty sure that I have two fuses. The patched firmware "CFW w" with 850W works fine for me.
MrCanidi you are right, there seems to be a lot of uncertainty. That's why I made a video for visual proof if you have two fuses or not. Thanks for letting us know!
How do you revert to stock firmware? i think this is nice to do sometimes just for fun put on the long term it will just wear off quicker the motor and battery.
Hi, great tutorial. I have a question thou, i downloaded the firmware in your link, is it still the best choices or is there a new 2019 updated one? I'm planning to flash custom firmware same time i upgrade to 10inch tires 😊
Not that much to gain from meddling with this except the more aggressive breaking as you describe it. The distance you travel and speed you increase by "modding" it would be in most peoples cases a 1-2 minute difference. Great video tho! Appreciated the breakdown on what the files meant! Thought initially it could go faster so I had to check out the internet. Ty for answers!
Dimitris Dafas i ask similar question to everyvody but noone answer. I think everyone breaks within some months. They rent them in Stockholm and i heard the lifetime of them is 3 months since people drive them hard, but the companies earn it back in 3 months, but not do We as We just want it for personal.
@@tbatong3983 thank you for answering my question although it is obvious that there is a limit for some reason and you Will burn your battery, so in conclusion why should your risk your scooter to go a little faster? Just go for another one faster than xiaomi or you can upgraid while puting an extra battery so it Will have a balance and wont overheat but i am happy with 26 km/h 😊
Confirmed USA model 16349 works, been riding a month no issues with hack. Post hack = happiness. Has anyone figured out how to avoid flats yet? I've tried Slime, Patching the holes. Both air will still burst thru once "sealed" after riding it.
I have a problem pls help me, so I tried it but then on the app it said at 3% send retry and did not work and now I am not able to shut off my scooter as well as not riding it and it is a European black version
Si tienes la versión 1.5.1 en el scooter nos vas a poder abrir los bins. La nueva actualización 1.5.1 anula las apps de terceros y no te deja modificar los firmwares. Dicen que es por seguridad contra los hackers que tomaban el control de los scooters, pero también se rumorea que Xiaomi lo hizo para fomentar la venta de de su scooter versión pro.
Max speed with this upgrade is 26. I have a brand new international version. My weight is 84kg Edit : I didn't downgrade first. Now I did and then upgraded to the recommended firewater and it works great! Much better :)) thanks.
I bought a new scooter recently, named VehiGo, and found its quick charging function is awesomeee!!! Hope you can try it and test it in details professionally for us. I'd like to know more about its performance :P
My white EU scooter reached top speed of 26km/h. No higher :( I try all firmwares available. Same result for top speed. But acceleration is improved, quite a lot :) Thanks
I have installed 200CFW_W. It's much more powerful going uphill and brakes now work as they should. But after some time the motor gets overheated and the scooter turns off. And is't just + 20 c outside. Overheating is a real issue.
thanks for letting us know!. after it cools down does it work normally after? i haven't been able to push mine that hard, plus its currently only 15-18c here
Seems that it works fine after several shut downs (all of them occurred after 30+ minutes of riding when the battery was low). It's hard to get shutdown when the temperature is lower than 20c. I measured the temperature after 50 mins of riding using infrared thermometer. It was about 85c. If you plug in the charger after ride like this, nothing would happen. It would start charging when the temperature drops to 50 (probably the battery is hot too). I also have found a solution. Switching to eco mode when 2 of 4 levels left will prevent overheating at the end of a ride.
NeEbiMozgi I have been driving yesterday for 6km at 33C. Motor was freakin hot, bit it was still running. Dunno about charging, bc I didnt dare. Charging hot batteries is bad for them, something I learned from my Tesla car.
Mine is Europen - arrived last week, should not be a problem with fuse(s) etc, but it shuts down on quite steep/long climbs. It worries me that it might be the same with the weak version. The engine is not hot and the temperature in Norway is less than 20 celcius. It charged immidately.
This is exactly the info I needed! You're very skilled at explaining and simplifying for morons like me! Perhaps you could make a short video around some safety with these tricks? F.ex is increasing top speed going to have the potential of killing your scooter, or is it safe?
@@SimonaCapodannoOfficial Actually even with 32 km/h it kind of overheats it going long way and on harsh terrain + heavy weight. For me 35-40 km/h would be a sweet spot. Wonder how other faster scooter handle the heat. Rev Scooter seems great in that department, but the price is not a great value in terms of what you get. Ninebot Max seems nice, hopefully it will cope with 32-35km/h.
@@TheChazas It will only go faster with higher voltage. The way brushless electric motors work is by the KV/RPM rating of the motor. So basically KV/RPM is number of turns, per volt, per minute. In other words, for each volt of electricity it will turn X amount of times per minute. An example would be a motor of 100KV running on 10 volts is 100KV x 10 volts = 1000, so it will do 1000 revolutions per minute on 10 volts. So the motor on the Xiaomi is no longer limited by software when it reaches 32 ish kph, it is now limited by the voltage. To go faster you would need to add a different battery or modify your current battery to have a higher voltage. The capacitors on the speed controller are rated to 60 volts and there are people on forums who have modified there batteries and ran close to 60 volts and get around 30 mph. Look it up on google.
@@sirfin44 It wont go faster than 20 mph, that's the maximum speed the motor will turn with the given voltage. At 20 mph the motor is no longer being limited, that's as fast as it it can go with out adding a higher voltage battery. Some people claim 21 - 22mph, those are exaggerations or people who go down hill with the wind on there back.
You might care to add, that if you don't stop at compulsory stops it won't matter whether you have two fuses or one, it's going to be immaterial to the car/truck that runs over you and your M365.
6:59 it's so funny that the driver wants to go before you because they think you're just a scooter dude, but then it stopped like "ough, I guess he's coming fast" :D
PLEASE HELP!!!!!!!!! So I do all the steps, using the win wip app, I place the file, both zip and unzip, in a folder and when I select it it tells me either "firmware not compatible" or "only encrypted accepted" or "invalid zip" PLEASE PLEASE PLEASE PLEASE TELL ME WHAT TO DO!!!
hey, can anyone who flashed the 200cfw say something about the results? does the battery drain faster that way? overall is it worth it for that extra speed?
Hey! I really liked your video. Thanks for sharing this information with us :) Are you supposed to do this everytime you ride or can you do it 1 time and it will remember it?
i have a single fuse bms and i found a double fuse bms that i can buy online. Question: will it work if i replace the single fuse bms to the double fuse bms?
Im quite confused, i just want to check if i have 2 fuse. Mine is a China white but the serial number is less than 35000 but manufacture date is march 2017, i dont wnt to tear appart inside as i dont have much time to really look into it. Do i have 2 fuses with looking at manufacturers date? Or it should be manufacture date and serial number above 35000 to make sure i have 2 fuse? Thanks for the help!
Ok guys i found out, the way to do it is simply by going to this link m365.botox.bz/ that this youtuner gave me in a cimment, then set the maximum speed limit to 31 or 33 then download the .bin file the website made for you, and run it in the app for downgrading, after u have degrade you firmware version u can now use rhe CFW200 and drive 5-7km/h additional. Np
Hi Doug Nhut, what is the fastest speed you could squeeze out of all the firmware combi's until now ? Managed on a flat surface somewhere over 32-33 km/h with fully charged batteries and firmware 1.38, not going past 1.40 but I did see newer firmware that prevents fiddling around
Hi, Thanks for the video. I get the error ZIP File not valid / Cant open. I try with other apps, same error. Funny becouse it work great on pc... what could it be ?
This is a brilliant upgrade Thankyou Doug. I'm a bit heavy & my M365 couldn't pull me up out of my drive. It flies up easily now. I'm not too keen on the new braking though. Can it be toned down? Cheers....
Nigel Raby thank you!. The braking can't be changed at the moment. But I'm sure firmware will be customizable in the future. Not sure when, but be sure that I'll be keeping an eye out for it and a video would follow
Hi, I have tried to down load the files, every time I attempt to flash the binary it states ' only encrypted files supported' Would this have anything to do with me upgrading the xiaomi home app?
guys search up "rollerplausch flashing firmware", apparently using the new beta version of downg and flashing ble072.bin will make you be able to flash custom firmwares on 1.5.1
It works! I just tried the new Beta version of M365DownG. Just flash the BLE back to 072 then everything else works again. You can keep the Firmware 1.5.1 if you want. rollerplausch.fandom.com/wiki/Flashing_Firmware ***Just realized that now on the Play store (as of April 26) there is a newer and official version 13. The beta version on **rollerplausch.com** is version 12.***
I am planning just to set maximum speed to 31kmh, and set cruise control to 3 seconds. Will this shorten battery life and rise the temperature of the motor?
Hey Doug, Great video and a big improvement to my scooter, (especially up hills). When switching to Eco mode does it revert back to stock speed for eco or is it more of a beefed up version. I have the bms 107 and 200_w . Cheers
How does this impact the firmware version? Does it get downgraded. Can you still use the XIAOMI app to restore or upgrade firmware to new factory version?
Doug Hnut I cant find the option to get back to my original firmware version. Can you help me with that? I cannot find this option in the Android downg app. Also in the iPhone original version I had an option to restore to factory defaults, but that is gone as well. Thanks!
Doug Hnut tried that but still getting error when I try then to upgrade to the latest firmaware version once I go back to my iPhone app. I will try one more time.
try this drive.google.com/open?id=1t8_8mvwGzmpCPJPGNha2SZgj7rMYgLKl im guessing you want the latest 1.4.0, you might need to try modified M365 downg apk app to install the DRV140
Ever since I did this a year ago... I’ve been smoking everyone on these skreets. Thanks for this video man a year later but it’s been a ride. I have a question, can we upgrade and add more battery and still have this setting on?
The firmware stopped working? Recently, I've found the speed not as fast as before and today I took a test. The top speed was 28kph, before was 31-32. Then I flashed the firmwares again, 115 and 200cfw. The top speed was even slower, 25-26kph. Does anyone know what could cause it? I checked the fm versions, they were installed successfully.
Doug, I upgraded today to 200CFW and BMS 115. Great increase in torque and hill climbing. I do notice a point at which the rear brake is very strong and sudden. If I understand well, this has to do with the firmware? I would tend to think the rear brake is purely mechanical, but I didn’t feel it when I tested braking with the scooter off. Did I understand well! Thanks!
It's amazing how fast the battery power can go down and it's noticeably slower below 50 percent juice. Hopefully, Xiaomi creates an upgraded battery pack that can hold much more power
I have a 16349 m365 and was able to successfully downgrade BMS to 107, downgrade DRV to 140 and flash with 200CFW. Scooter is working as expected and is noticeably higher performing in acceleration and braking. Thanks for the great tutorial and file names!
Jason Kol same here. Mine just arrived today.
Hey man is your m365 still working with the upgraded firmware
My scooter when it says no permission to the files while I have everything accepted and on do you know anything mate? How I can fix that
@Floofyienator CS:GO Yes, still working great! I highly recommend this mod.
@Floofyienator CS:GO Check out this vid for your scooter: ua-cam.com/video/LEehwWhS19k/v-deo.html
Did it and the scooter is much more aggressive. Thanks a lot
καλησπέρα, το έκανες και δουλεύει κανονικά??? ποιο firmware χρησιμοποίησες??? ευχαριστώ Γιώργος
Doug and Gerasimos, it seems that with version 142 you cannot easily downgrade. Even if you apply custom firmware with 1.3.6 with patched m365 downG. Any help?
Doug and Gerasimos, it seems that with version 142 you cannot easily downgrade. Even if you apply custom firmware with 1.3.6 with patched m365 downG. Any help? It seems to flash but with no results.
@@georginaouas φιλε μου εκανα ακριβως τα βηματα οπως το περιγραφει. εβαλα το cfw200_w. Η επιταχυνση μου εγινε αισθητα πιο καλη. σχεδον σπιναρει απο σταση σε φουλ ανοιγμα. Η μπαταρια πεφτει πολυ πιο γρηγορα (λογικο) αλλα δε μου λειτουργει το κλειδωμα. Μεγαλη διαφορα στις ανηφορες. μου εχει δωσει 3 χλμ οερισσοτερο ταχυτητα σε ανηφορα 8%. το θεωρω μεγαλη διαφορα.
Σε ευχαριστώ για την απάντηση! Λίγο για τη μπαταριά το σκέφτομαι(είναι τόσο χάλια???)... Και να σε ρωτήσω κάτι ακόμα, αν θέλεις μπορείς να κάνεις restore στο δικό του firmware?? Ευχαριστώ πολύ και πάλι!!!!@@BarchettaClubGreece
Where ever you live is sooooooooooooo perfect. The roads, houses etc! You lucky
Just in summer, then cold makes it horrible
@@ruskisall how cold?
I thought that with more power comes more responsibility.
😂😂 only spidey fans know
It’s great power 🤣
Damn
Robert Oneill yeah i think he knows that
With more power, comes greater electricity bills
Thanks Doug. Took some bits from you and some from Rollerplausch been test driving today. 43.1km I got out of it. Did not believe it at first so I then used 3 different speed apps and it’s doing 40km an hour. Supper happy hope it lasts
and what firmware is now the best for you ? i want to know it pls :)
BMS-115
BLE-72
DRV-138
Just went for another spin could only get 34 out of it battery now at 34% 2698mha so it’s use 66% battery and I only done 7km
big jay does it still work today for you?
David 1999
Some days it will go over 40. I don’t go much faster than 33km just to save battery it’s very aggressive will wheel spin on gravel
You sir deserve a medal
It works for my Amazon bought US Version. Had to downgrade from 1.42 to 1.40 doe cuz I upgraded right out of the box then. Feels slightly faster~ about 3mph more for me and hill climbs are definitely better.
Update: Tested it out to go to work today WITH the mod for the first time. My ride to work is 5 miles (8km) one way. For the mod, I used the 200CFW_W, and I was averaging around 19.5mph (31km/h) and passing a lot of bicyclist with some saying my scooter is fast! Average temperature of my vehicle was at 80 degrees fahrenheit (which is 26 celsius i think) when I got to work and parked it at my cubicle. However, that's with the outside morning temperature of 36 Fahrenheit which is 2 celsius. Overall, I am happy with the firmware mod, and thanks Doug for the great tutorial vid!!
How did you do this from 1.42 to 1.40 please help
I was going to ask how dose the battery range fair with the fast firmware installed
Виктор Остр ua-cam.com/video/0p93i71ItZY/v-deo.html read the description
Note that with these electric motor attached to tire, the tire under heat expands/higher psi. My Segway pro had tire bubbling issues because of this heat. Probably cheap rubber being a big issue. I put in bicycle tubeless sealent to seal the microscopic holes.
no cop no stop
For us in the UK its even better the police cant shoot you lol
@@honeybadger9425 lmao
In norway they shoot you in the foot
@@Benjaminkul lol
It's all fun and games until you get creamed by a 2 tonne automobile.
OH. It's work . I'm buy m650 yesterday, and found your vid today .
My hands louse control ,then click ,load and finish flash.
It work for me.
Thank a lot.
Bms v.115
Ble v.72
Drv v.138
Batt date 13/6/18
Thank you! This works exactly as you described, but after using 107 + CFW, I switched back to the original settings. I was excited to increase the speed limit, but I found the overall ride requires me to work harder, and be much more alert, especially when breaking / stopping. It's a quicker, but also less enjoyable a ride - for me. Also, it used nearly 2X battery vs factory setting. Thanks again for the excellent thorough video, but a word of caution for those on the fence about this. Glad I tested it, but very glad to be back to original settings.
How did you go back to the original settings ?
@@lucavlak4556 with scooter turned off pull the brake and at the same time press Accelerator and turn on you will hear a single beep followed by 4 beeps when you hear that let go and scooter is factory default
Observations with cfw200 & bms107 in a hilly town:
-Very noticeable speed and hill incline improvement
-Battery life is greatly impacted (50%+), my battery dies on trips that usually left it at 35-40%
-Motor is hot when I get home and it takes ~10 min before the scooter accepts charging, this even when it was 11c outside
So it's nice but I'm switching back to stock.. it would probably fare much better on flat ground
Thanks for sharing! im hoping one day we can add an extra battery easily without too much modification
@@DougHnut this day haven't came yet. Has it ?
Check my playlist, I made video on adding a battery awhile ago
Doug Hnu
How about at a hot country (Brazil)? This update would works fine over 30°C? Will BMS manage the power to not burn the batery and motor?
Just bought the scooter as it was on sale.
Can't wait to give this a go.
where is it on sale?
@@iThomasDK $329 via this Amazon affiliate www.woot.com/offers/xiaomi-mi-electric-scooter-6
Hi Doug, it's a great video as always. You won't believe what happened to me (and my Xiaomi scooter). I was riding at 26KM/hr down the road when the handle bar split and cracked (where the folding joint is). Basically the top part oft handle bar was in my hand and the bottom skate board part was separate (except for the cables holding it together)! The bottom part turned left (out of balance) and I kept holding the handle bar confused in that split second as to what happened. I flew 2 -3 meters in the middle of the road. I was SO LUCKY, the the incoming cars all had time to brake and stop and not run over me. I was so lucky because 4 cars had just passed me 6 seconds ago and if that happened, I would be dead. They would run over me unintentionally. Let alone 6 seconds before that I was going down an incredibly-incredibly steep hill and wold have flew from the top of the hill and presumably died from the looks of it. I was on the asphalt, bleeding, unable to speak, unable to think and unable to move. They got down from their cars and carried me to the pavement calling the hospital. Next thing I was in hospital and luckily nothing broken, just my hands and legs are badly bruised and bleeding I cannot walk. I had some stitches, but it's fine.
WOW, im glad you are mostly ok, get well soon! i've never heard of the pivot breaking, im guessing its the main pivot bolt that snapped? i should really check mine.
thanks for letting us know!
Best wishes to you and get well.
Hi Doug, thank you so much. I'm recovering physically. I think the psychological part is trickier. I am so grateful that it did not happen down a *very* steep road (18 degrees = 32.9% slope). The thought of that happening is haunting me (think I've got some trauma from that experience). I would have been flying over cars and definitely run over. Yes, you are absolutely right, it is the pivot breaking. I can send you pics to see it. What I am suspecting happened is every time you ride fast we tend to pull the handle bar back especially when you are going down a slope. The issue is it is not supposed to break! They advertise it as secure with it being aircraft grade metal, etc... The max weight is 100KG I presume (or 120)? I am 85KG. So that should be OK. I even bought a second one (as I use it for daily work and having a flat tyre is an issue) but now I don't dare to get on it. You guys need to be careful, it can crack and I'm 85KG.
Thank you so much!
it happens often and often unfortunatelly. Did you tighten the screw there? i heard that is the main problem, the screw being to tight and folds the pivot. Anyway, i hope you're alright!
Great information, but scary watching you blow through stop signs.
He's trying to save your life, crazy-dude-on-2-wheels. Don't you have some luv for that or at least a hug?
u stop at stop signs ? lmao wuss.
Npc
just did the update you recomended and it works great now, love it!
Hey guys, many of you would like to try this mod out and dont want to damage your scooter.
Simply change into eco mode and eco mode will make a limit of 25 km/h where as normal mode will be 32 km/h with the speed hack.
OR
If you dont want it then factory reset your scooter.
How do you make it faster ?
Great tip... Thanks. Took me sometime to figure it out the firmware. Scooter is flying at me moment around 30km/h. Cheers.
I got battery drain....
Battery upgrade and you're good to go
Do u have 2 stay connected with the app for this hack to work ( for example: i ride the scooter while i have my phone at home)
7:15 what is that STOP
According to the law, the roller is not a vehicle And he's not a pedestrian. So he's a ghost. And the spirit and the spirit can't be hit. (at least we don't have about any regulation on it yet) .
I drive my car through stop as I’m more important than everyone else
Tory Boy bruh
@@Cultwatch123 bruh
@@marcelltoth8516 here in England you can get arrested and have thrm confiscated they are vlassed as a motorised vehicle so u need a licence like a bike to ride legally probably because of videos like this
I made my own custom firmware and my scooter goes 32 now thank you so much!
I like the tutorial, I'm currently happy with the original max speed.
is this true?
no hes^^ lying hes not happy with his speed hes just gay and scared oh higher speeds may break his nail
V valv LOL
@@vvalv1480 if your gonna bring negativity then dont comment please
question, if i speed up my scooter will it use up the battery faster??
fantastic video, worked after downgrading to 1.40, already looking forward for tomoro
my scooter upgraded to 1.5 how do you downgrade ?
I have similar problem...mine is FV 1.5.4...did you find any solutions?
Hey man. Appreciate your video. Getting this scooter in couple days, alredy feel like i want it to go faster 😁😆 liked and subscribed
You still have it? How does it feel after some time?
hey bro! i need your review
Yes bro
@@edika2333 it is incredible my friend
You are my hero, my captain, my savior. Thanks for the video!
hi i have a pro 2 and i have been trying to upload the firmware but down g will not load the file i have extracted it using jzip but the file looks lite and went you press it downg does not load it. Any help you could give would be greatly appreciated. thanks
i have the same problem
Electric scooters are a lot of fun. I usually ride it too. However, Japanese law is strict, so it is difficult. It's a very interesting channel! I am good at shooting videos. With love from Japan :)
I miss Vancouver such a beautiful city. Too bad they've made it impossible to live there unless you want to be a slave to a 1 million dollar home mortgage your entire life.
@ell mmm fck them . I keep living in my van it's much better
welcome to london life, where one house is triple that amount!
@@nomorecopyrights4222 10x
the app doesnt allow me to select the bin file , it shows its greyed out...
i even tryed to copy the zip file into the android and i cant select the bin
i also tryed to download the file directly from the phone but when i open the bin all the files i download form the phone are gryed out
Best test on Utube ! Amazing :)
Lodzki Pirat tez sie tu pojawil;)
Wish I had a phone holder same as yours. Got my scooter today, bought a holder from a local store, and at the first bump my s9+ completely shaderrd, at least only the back got cracked.
what about the PRO version of xiaomi ? can you make a video for it also ? :)
Please help.... when I try to flash 200cfw it tells me only encrypted accepted. But will let me flash bms107?
Same problem
Any solutions?
m365.botox.bz/ set it to 1.3.8 and flash this before you flash the other program he says to flash.
Finding out if you have two fuses seemes to be not easy. My serial number is way below the 35000 but the battery production date is 08/2017. I got mine early 2018 and it had BMS 1.1.5 installed. I am pretty sure that I have two fuses. The patched firmware "CFW w" with 850W works fine for me.
MrCanidi you are right, there seems to be a lot of uncertainty. That's why I made a video for visual proof if you have two fuses or not. Thanks for letting us know!
16349
battery from 08/2018
CFW_W worked great so far! I didn't get over the 30 km/h but the wind might have something to do with it.
jeronimoPTY how is it now rides smooth still
This is the model I have 16349 does that mean I have two fuses?
00031102
Will it damage the scooter even if you have 2 fuses? And what about long term battery life?
Just the guy I was looking for!
How did I find u on yttt and did it work
@@artymuss7703 wtf why you watching that vid, have u got a scooter. No it didn't work coz I got a different scooter
@@rayanshehadeh1518 I might be getting that one and I was just looking at wich scooters are gooddd and stuff
@@artymuss7703 yeah that's good I recommend the xoami m365 pro or the 1s
How do you revert to stock firmware?
i think this is nice to do sometimes just for fun put on the long term it will just wear off quicker the motor and battery.
Hackm365.com has archives to restore factory configuration too.
great video of all the different modes and how they opperate the start speed.
Hi, great tutorial. I have a question thou, i downloaded the firmware in your link, is it still the best choices or is there a new 2019 updated one? I'm planning to flash custom firmware same time i upgrade to 10inch tires 😊
What is that BLE ver 71. I have BLE ver 72 and I am unable to pass the 26 kph speed limit. Could that be the issue?
BLE is just Bluetooth firmware. It won't effect top speed. What drv firmware version shows up when you connect to m365downg?
Such a nice neighbourhood.
Not that much to gain from meddling with this except the more aggressive breaking as you describe it.
The distance you travel and speed you increase by "modding" it would be in most peoples cases a 1-2 minute difference.
Great video tho! Appreciated the breakdown on what the files meant! Thought initially it could go faster so I had to check out the internet. Ty for answers!
i would like to ask you,is it worth to put at risk your battery? and how is your scooter now,did it show any problem? thank you
Dimitris Dafas i ask similar question to everyvody but noone answer. I think everyone breaks within some months. They rent them in Stockholm and i heard the lifetime of them is 3 months since people drive them hard, but the companies earn it back in 3 months, but not do We as We just want it for personal.
@@tbatong3983 thank you for answering my question although it is obvious that there is a limit for some reason and you Will burn your battery, so in conclusion why should your risk your scooter to go a little faster? Just go for another one faster than xiaomi or you can upgraid while puting an extra battery so it Will have a balance and wont overheat but i am happy with 26 km/h 😊
@@MegaAporito european law limits escooters to 25kmh
Confirmed USA model 16349 works, been riding a month no issues with hack. Post hack = happiness.
Has anyone figured out how to avoid flats yet? I've tried Slime, Patching the holes. Both air will still burst thru once "sealed" after riding it.
It's telling me that firmware not compatible, only encrypted accepted, what should i do?
use the zip one, worked for me
I have the same issue. What do you mean by using the zip one? There's only one zip folder to download for all the firmware files.
Same here. Firmware ver 1.2.6 (factory) SN: 21886/00xxxxxx
I have a problem pls help me, so I tried it but then on the app it said at 3% send retry and did not work and now I am not able to shut off my scooter as well as not riding it and it is a European black version
Wassey Saeed what happen bro you have same model to me i want try it but im scared
Louie Paras oh no it’s fine it took the scooter a bit of time and it shut downed it selfe but I am too scared to try it
Is it possible to put the scooter into eco mode if the cops come? The one if you press the power button 2 times fast.
Si tienes la versión 1.5.1 en el scooter nos vas a poder abrir los bins. La nueva actualización 1.5.1 anula las apps de terceros y no te deja modificar los firmwares. Dicen que es por seguridad contra los hackers que tomaban el control de los scooters, pero también se rumorea que Xiaomi lo hizo para fomentar la venta de de su scooter versión pro.
Max speed with this upgrade is 26. I have a brand new international version. My weight is 84kg
Edit : I didn't downgrade first. Now I did and then upgraded to the recommended firewater and it works great! Much better :)) thanks.
My one isn’t even upgraded or something and goes 26
I bought a new scooter recently, named VehiGo, and found its quick charging function is awesomeee!!! Hope you can try it and test it in details professionally for us. I'd like to know more about its performance :P
Great video. One question though, how do you revert back to stock. Thanks
Any news on this
its coming late.. but press default use that one. its then stock.
m365.botox.bz/
@@lthallinto8802 hi my scooter has been speed upgraded , but the battery dies so quick , how do i use the link to revert my scooter back to normal
My white EU scooter reached top speed of 26km/h. No higher :( I try all firmwares available. Same result for top speed. But acceleration is improved, quite a lot :) Thanks
Maybe you weight more than the original video poster?
@@filippiasec 82kg
I have installed 200CFW_W. It's much more powerful going uphill and brakes now work as they should. But after some time the motor gets overheated and the scooter turns off. And is't just + 20 c outside. Overheating is a real issue.
thanks for letting us know!. after it cools down does it work normally after? i haven't been able to push mine that hard, plus its currently only 15-18c here
Seems that it works fine after several shut downs (all of them occurred after 30+ minutes of riding when the battery was low). It's hard to get shutdown when the temperature is lower than 20c.
I measured the temperature after 50 mins of riding using infrared thermometer. It was about 85c.
If you plug in the charger after ride like this, nothing would happen. It would start charging when the temperature drops to 50 (probably the battery is hot too).
I also have found a solution. Switching to eco mode when 2 of 4 levels left will prevent overheating at the end of a ride.
NeEbiMozgi I have been driving yesterday for 6km at 33C. Motor was freakin hot, bit it was still running. Dunno about charging, bc I didnt dare.
Charging hot batteries is bad for them, something I learned from my Tesla car.
Mine is Europen - arrived last week, should not be a problem with fuse(s) etc, but it shuts down on quite steep/long climbs. It worries me that it might be the same with the weak version. The engine is not hot and the temperature in Norway is less than 20 celcius. It charged immidately.
This is exactly the info I needed! You're very skilled at explaining and simplifying for morons like me! Perhaps you could make a short video around some safety with these tricks? F.ex is increasing top speed going to have the potential of killing your scooter, or is it safe?
Since Pro have more powerful motor and bigger battery, can it go even faster like 35-40 km/h with proper firmware?
@@SimonaCapodannoOfficial Actually even with 32 km/h it kind of overheats it going long way and on harsh terrain + heavy weight. For me 35-40 km/h would be a sweet spot. Wonder how other faster scooter handle the heat. Rev Scooter seems great in that department, but the price is not a great value in terms of what you get. Ninebot Max seems nice, hopefully it will cope with 32-35km/h.
@@TheChazas It will only go faster with higher voltage. The way brushless electric motors work is by the KV/RPM rating of the motor. So basically KV/RPM is number of turns, per volt, per minute. In other words, for each volt of electricity it will turn X amount of times per minute. An example would be a motor of 100KV running on 10 volts is 100KV x 10 volts = 1000, so it will do 1000 revolutions per minute on 10 volts. So the motor on the Xiaomi is no longer limited by software when it reaches 32 ish kph, it is now limited by the voltage. To go faster you would need to add a different battery or modify your current battery to have a higher voltage. The capacitors on the speed controller are rated to 60 volts and there are people on forums who have modified there batteries and ran close to 60 volts and get around 30 mph. Look it up on google.
@@jcreedy20 can you send me a link ? Or share the settings on the firmware builder? I can't seem to get more than 20mph
@@sirfin44 It wont go faster than 20 mph, that's the maximum speed the motor will turn with the given voltage. At 20 mph the motor is no longer being limited, that's as fast as it it can go with out adding a higher voltage battery. Some people claim 21 - 22mph, those are exaggerations or people who go down hill with the wind on there back.
I'm not able to do this. Still shows that drv is 141. Encoded downgrade file needed. Flashed couple times with drv130. Still shows 141
drv 141 cannot be downgraded directly to drv130. you must got to drv140 first
You might care to add, that if you don't stop at compulsory stops it won't matter whether you have two fuses or one, it's going to be immaterial to the car/truck that runs over you and your M365.
6:59 it's so funny that the driver wants to go before you because they think you're just a scooter dude, but then it stopped like "ough, I guess he's coming fast" :D
Daniel Adam thought the exact same thing hah
4:25 "After about a minute it should be done" Time on phone goes from 4:18 to 5:32... :D
Xd
Not very legitimate huh
Sorry Sherlock fucking Holmes
PLEASE HELP!!!!!!!!!
So I do all the steps, using the win wip app, I place the file, both zip and unzip, in a folder and when I select it it tells me either "firmware not compatible" or "only encrypted accepted" or "invalid zip"
PLEASE PLEASE PLEASE PLEASE TELL ME WHAT TO DO!!!
Reset the scooter through the original app and then start over
hey, can anyone who flashed the 200cfw say something about the results? does the battery drain faster that way? overall is it worth it for that extra speed?
iftahellbob abdi kaflar mahmod amar
Works with the clone version of the scooter?
Hey! I really liked your video. Thanks for sharing this information with us :) Are you supposed to do this everytime you ride or can you do it 1 time and it will remember it?
That the best explanation video i have seen cheers
Perfect information video, thanks
i have a single fuse bms and i found a double fuse bms that i can buy online. Question: will it work if i replace the single fuse bms to the double fuse bms?
2:17 smashing that stop sign at 35km/h is very bossy
I mean the road is empty
Im quite confused, i just want to check if i have 2 fuse. Mine is a China white but the serial number is less than 35000 but manufacture date is march 2017, i dont wnt to tear appart inside as i dont have much time to really look into it. Do i have 2 fuses with looking at manufacturers date? Or it should be manufacture date and serial number above 35000 to make sure i have 2 fuse? Thanks for the help!
It didnt work on european white model i checked everyfing but app says invalid bin
I have european black and said same on the Both the CFW200 and CFW200_W
Same here
Ok guys i found out, the way to do it is simply by going to this link m365.botox.bz/ that this youtuner gave me in a cimment, then set the maximum speed limit to 31 or 33 then download the .bin file the website made for you, and run it in the app for downgrading, after u have degrade you firmware version u can now use rhe CFW200 and drive 5-7km/h additional. Np
How much range do you get with this range
I just can't select the bin file
Hey what do i do, when i try to flash, it says only encripted accepted , no binary loaded. What do i do?
SuperNova look for the encrypted bin files on google. The reason you have to do is because you upgraded your firmware to 1.5.1.
@@victorle7960 do you know where to find the encrypted files? I cant find them anywhere.
Doesn't work. All the files are grayed out and you can't install them.
Any solution to this issue? New set of files or anything like that? Help very much appreciated
This is like 6 ur old bro I reckon you’ll av to get/look for 2024 hacks..
Perfect video. UA-camrs take note....
Hi Doug Nhut, what is the fastest speed you could squeeze out of all the firmware combi's until now ? Managed on a flat surface somewhere over 32-33 km/h with fully charged batteries and firmware 1.38, not going past 1.40 but I did see newer firmware that prevents fiddling around
Hi, Thanks for the video. I get the error ZIP File not valid / Cant open. I try with other apps, same error. Funny becouse it work great on pc... what could it be ?
Great tutorial. Would be nice if there was a firmware to keep eco and normal all the same but add a 3rd sports option to do 200cfw.
Yes exactly thinking the same thing.
it wont let me flash the firmware to anything else but BMS. it says "encoded files needed!!"
CryptoDaddys yes same for me...
@@Flosionis let me know when you if you get it firgured out bro, I've tried the Easy 1.5.1 Firmware Downgrade but no luck. only will flash to bms.
@@Flosionis #Jan Kuźnik
might have the answer
This is a brilliant upgrade Thankyou Doug. I'm a bit heavy & my M365 couldn't pull me up out of my drive. It flies up easily now. I'm not too keen on the new braking though. Can it be toned down? Cheers....
Nigel Raby thank you!. The braking can't be changed at the moment. But I'm sure firmware will be customizable in the future. Not sure when, but be sure that I'll be keeping an eye out for it and a video would follow
I just got one today and it’s so fun 😃
Hi,
I have tried to down load the files, every time I attempt to flash the binary it states ' only encrypted files supported'
Would this have anything to do with me upgrading the xiaomi home app?
Same happened to me
Same here
guys search up "rollerplausch flashing firmware", apparently using the new beta version of downg and flashing ble072.bin will make you be able to flash custom firmwares on 1.5.1
It works! I just tried the new Beta version of M365DownG. Just flash the BLE back to 072 then everything else works again. You can keep the Firmware 1.5.1 if you want.
rollerplausch.fandom.com/wiki/Flashing_Firmware
***Just realized that now on the Play store (as of April 26) there is a newer and official version 13. The beta version on **rollerplausch.com** is version 12.***
Yip got mine going really well now 43km wiill do bit more testing today
thanks! clear instruction
I am planning just to set maximum speed to 31kmh, and set cruise control to 3 seconds. Will this shorten battery life and rise the temperature of the motor?
Yes
Hey Doug, Great video and a big improvement to my scooter, (especially up hills). When switching to Eco mode does it revert back to stock speed for eco or is it more of a beefed up version. I have the bms 107 and 200_w . Cheers
Did you find this out?
Its stock
I just got my scooter. Does this work on 1.5.4? I cant even connect my scoot on the m365 app
top speed wasn't super noticeable, but it was good to get extra power going up hills and downhill speed increase too
Yeah the extra power for climbing hills is nice. I no longer have to kick to help it up my usual hills.
Which speedometer is in your cellphone and what's the phone holder?
i tried doing this now my scooter dosent work it vibrates and brake when i try to move won't turn off wtfffff?
You locked it on the app
does the speed hack only work when the m365 downG app is connected to the scooter?
How does this impact the firmware version? Does it get downgraded. Can you still use the XIAOMI app to restore or upgrade firmware to new factory version?
yes you can, you can even do it with the "m365 downg" app
Doug Hnut I cant find the option to get back to my original firmware version. Can you help me with that? I cannot find this option in the Android downg app. Also in the iPhone original version I had an option to restore to factory defaults, but that is gone as well. Thanks!
flash drv134, that is original firmware
Doug Hnut tried that but still getting error when I try then to upgrade to the latest firmaware version once I go back to my iPhone app. I will try one more time.
try this drive.google.com/open?id=1t8_8mvwGzmpCPJPGNha2SZgj7rMYgLKl
im guessing you want the latest 1.4.0, you might need to try modified M365 downg apk app to install the DRV140
Ever since I did this a year ago... I’ve been smoking everyone on these skreets. Thanks for this video man a year later but it’s been a ride. I have a question, can we upgrade and add more battery and still have this setting on?
Thank you!!!
The firmware stopped working? Recently, I've found the speed not as fast as before and today I took a test. The top speed was 28kph, before was 31-32.
Then I flashed the firmwares again, 115 and 200cfw. The top speed was even slower, 25-26kph.
Does anyone know what could cause it? I checked the fm versions, they were installed successfully.
What firmware are you on according to the m365downg app?
top.. it's work!
but the max speed is 29kmh... i thought these xiaomis could go 33/34 km/h easily
V valv how did you make it faster
V valv you a hater bro, last comments I’ve clicked on you’ve just been hating on shit😂
I am very late to this video but whatever. Can the scooter take damage if the motor gets to warm? Very thankful for answers
Doug, I upgraded today to 200CFW and BMS 115. Great increase in torque and hill climbing. I do notice a point at which the rear brake is very strong and sudden. If I understand well, this has to do with the firmware? I would tend to think the rear brake is purely mechanical, but I didn’t feel it when I tested braking with the scooter off. Did I understand well! Thanks!
yes braking is stronger. but it doesn't affect the rear brake, just the regenerative front brake.
I just want to ask if you upgrade the speed.it will not affected the performance of the battery?