Buy AKASO Action Camera Accessories Kit: Official Website: bit.ly/3glJYvy Amazon Website: www.amazon.com/dp/B072R4SXTT AKASO Outdoor Sports Action Camera Accessories Kit 14 in 1: For AKASO EK7000/ EK7000 Plus/ EK7000 Pro/Brave 4/ V50/ V50 Pro/ V50 Elite/CAMPARK/Go Pro Hero 5 in Swimming Any Other Outdoor Sports
Having a difficult time taking off case. The screw won't budge. Please advise as I don't want to damage the case or camera. I can't turn the screw counterclockwise... please advise.
@@richardbartell3526 Hello, please consult our customer service staff on the shopping website for after-sales problems. We will serve you wholeheartedly.
Thanks! I'm a film student who's only bought their first video camera a few months ago(march/April 2020) and am still pretty new to video cameras. I bought this action camera in April because I have a low budget and am hoping to try it out on a beach day soon. All of the attachments were overwhelming and the instructions leaflet only showed how to charge the batteries. This video was just what I needed!
is there an attachement to secure and hold the camera whilst snorkelling? I can't seem to find anything to fit onto the waterproof case that does this. thank you
There's no other video more useful than this out there. Kudos to akaso_official. Quick question though. What exactly is the tether wire/cable for? Does it serve as a backup in case the camera were to fall off by accident? Is it recommended to put on the camera?
Thanks! About the tether wire/cable, ① If you want to fix the camera on the helmet, it is used to fix and protect the camera(10:35) ; ② Another use is to tie the camera to the wrist to prevent it from falling（Just like the third picture in amazon purchase link: www.amazon.com/dp/B072R4SXTT). Are these answers you want? 😄
@@akasoofficial thanks so much for the reply! I actually have the *Akaso V50x* that also comes with the tether wire/cable and I mounted it to a helmet... how would the cable be able to *protect* it?? As in, would it prevent it from falling if it were to accidentally fall? In other words, is it necessary to use it when mounting it to a helmet? It just kind of seems a bit strange with the way the tether was put on... Also for the second case of using the tether, I tried to check out the amazon link but it said "sorry, we couldn't find that page". Is there another link for it?
@@theelectronomer2319 The amazon website have been changed and you can try to click again. It's used to fix the camera and helmet. Without it, the camera can easily fall off the helmet.
It took several tries to find "the best" mounting position on my e-MTB. First there was the standard "top of the handle bars" position, a PITA since there is not enough room; the bike controller display, the bike computer and the strobe head light require room! Next was the "Top of the helmet" which works OK, but is asking for trouble if one has a crash. Third the position on the fork beam, which was a very good POV, but problematic on very bumpy trails since both the Brave 4 and the EK 7000 had a tendency to stop recording over those trails. What finally works best for me on the bike is the "suspended from the handlebar" position. I also added a 10'000 mAh power bank as a reliable supply. Took a while to get it figured out, but now I get the videos I want from the POV I like. For XC skiing I have a chest mount harness.
@@akasoofficial You're welcome! Video quality from the suspended from the handle bar position. Usual speed on the dusty Rail Trail between 27 and 34 km/h. ua-cam.com/video/NGSED1TcB3Q/v-deo.html
I know that this is an old thread, but trying anyway. I just got the V50X yesterday and maybe I got something wrong - but I thought that the camera could be used for a anything apart from diving without the waterproof casing. But dang it... Both USB ports and the SD card slot on the left side of the camera is completely uncovered - nothing prevents water, moist, dust etcetera from getting into those openings? And the extra waterproof back for the waterproof casing...what is that for?
If its the v50 you have it may be that that's an old version that doesn't include it yet or it's a new version which has discontinued it. I have the ek7000 and it includes all of these and I bought mine April 2020
I was wondering the same thing. The one it comes with, no sound when you record video. The Extra, has two slits in back, so you can pick up some sound, but, its not total waterproof then.
I bought a brave 7 le and I cannot find a clip like the one at 1:17. I wanted to have a case or tripod attachment and be able to screw a light in on top. How do you attach a light to the camera?
I was hoping that the video would show me how to connect the camera to the body harness but it doesn't. What would also be great would be a video showing how to release certain parts.
I have the Brave 4 but even so with the exception of just a couple of the attachments the rest appear to be exactly alike. I had been wondering how to attach the camera to my bike helmet and this video definitely resolved that issue. So thank you for that! :) Just curious though in the first section when you used the tape to attach the helmet mount to the side of the helmet, just how strong is that tape and how prone would the camera be to falling off when riding on rough terrain? Because only the tape is securing the camera to the side of the helmet. I'd hate to hit a bump and have it fall off. (Oops.... LOL) I'm also curious on how to remove the clip on Mount 2 from the helmet mount when I'm finished riding or is it a case of "once that clip is installed it can never be removed"? But if it can be removed I'd really like to see a video on how to do that please. Again, thank you for the very informative video!!
I was wondering how to change the back door on the waterproof case to the one with the holes in it so more sound will get into the camera. I was also wondering why the clip for the body mount didn't seem to go anywhere. Didn't realize it went into the open cradle.
I just ordered an v50x, and I'm wondering of i can attach it to a helmet that does not have vents? I want to use it for snowboarding, and my snowboard helmet doesn't have large vents to keep the inside of the helmet warm. Will the adhesive on the attachment keep it on the helmet? Thanks
@@akasoofficial thanks, on the part where you mounted the camera on the side of the helmet, you just used adhesive, and no straps, and it seems to have worked, so I guess that it should be the same for the top. Thanks for the quick response
Great informative video. It explains how to use the various mounts. I did find that I needed to order a head and a chest mount seperate. I plan on using it while vacationing in Hawaii. I plan on going ziplining and will need a helmet mount. The head mount I ordered said it will fit on a helmet. Now I'm super excited! Thanks again for the info. Also, plan on taking a segway tour. I think the handle Bar mount will come in handy.
@@bobalgerian we thoroughly enjoyed our vacation, thank you! I used the camera while snorkeling in Maui at the Molokini Crater and Turtle Town. I tried to use it for our zipline adventure, but apparently either it went into sleep mode or I didn't press the on button correctly. I didn't get any coverage. Instill have the memories, though
@@rickthibodeau9172 How did you use it snorkeling? I bought a chest mount, but I'm unsure how to mount the camera in its waterproof case to the chest mount (the mount I have is part of the Akaso Outdoor Sports Action Camera Accessories Kit 7 in 1). It seems like I really have to force it into the clip on the chest mount, so I suspect I might not have the right combination.
@@annglamgal I ended up using the yellow boy handle. Don't trust the wrist strap. It actually came off in the water. At least the boy made the camera float.
I found it easiest to open it by inserting a fingernail, or a file or something small, into the slot closest to the edge of the camera, then pull toward the camera and pull upward. I'm not certain as to why there are two slots there, it can be deceiving, but if you look very closely at them you'll see the upper one has a little lip there to catch your fingernail on to open it. I hope that made sense and helps.
@@JasperLeroux On my keychain I have a mini pry bar that tapers to a blunt point, probably the best thing I've ever put on it. It's basically a big metal fingernail.
That's great except there are no such accessories in my kit. The helmet mount has notches which doesn't fit with the weird attachment clips supplied and "Clip #2" on the parts list which would fit this kind of mounting bracket was not included in my camera accessory kit
Let me help everyone here. The helmet mount they supply is flat and helmets are curved. GoPro gives to a curved helmet mount and that mount is still on my helmet after five years just sticking it on. I applied the Akaso helmet mount and it’s only sticking in about a pencil width surface contact due to it being flat. You can even see it in the video here. The place they applied it in this video is barely making surface contact with the helmet. They smushed it against ridged areas of that helmet LOL. My Akaso fell off while testing over carpet. Doesn’t it strike you off too that they are recommending using a zip tie??? Seriously??? I might as well just use duct tape and wrap is around the helmet and camera three times and call it a day…
my ek7000 did.t come with a threaded clip like on the helmet portion for top mounting. It just came with one with a hole in it and I can't find a use or reason for that...did I get a faulty piece?
Hi, the accessories in the video are from an extra accessory kit, not directly coming from the camera package. www.akasotech.com/product/14-in-1-accessory-kit.
Good tutorial. I mounted on the helmet, but if you ask me it is not good at all. 1.Your head is geting heavier a lot. 2.The strips that actually hold the whole camera is moving because you can't tight enough for don't allowed camera to move while you drive on bumpy road. That means your camera is not firm on your head and your videos will be bad. 3.The yellow bolt where you put camera it is not se cure enough.
At present, there is no video tutorial about this. Maybe I can ask the Video Production Team to make a specific one. Please stay tuned and thanks for your support.
I just measured the mount with the screws fully compressed and the the mount can squeeze onto a cylinder or barrel as small as 5/8 of an inch in diameter
The cool thing about mounting to a gun barrel is that it can mount to the bottom and still have the camera facing upright considering the camera bracket has a top and bottom mounting point for the bracket. I imagine it would work really well on a gun.
Hello, it's suitable for AKASO EK7000/ EK7000 Plus/ EK7000 Pro/Brave 4/ V50/ V50 Pro/ V50 Elite/CAMPARK/Go Pro Hero 5 in Swimming Any Other Outdoor Sports
I can't figure out how to use the back door with the slot cut outs. In the video it shows you how to remove and attach it, but in the video they change out the same door and not the one that comes in the kit. I don't understand what the slots are for when it's a waterproof casing?
Hello, We are recording operation videos of different models of action cameras. If you are not in a hurry, please wait for the operation instruction of the latest operation video. If you urgently need to solve the problem, please contact our after-sales service team (cs@akasotech.com), we will serve you wholeheartedly. Thank you.
Hello, the bandages are WiFi Remote Fastening Tape Wrist Strap: Long enough to fit around bulky ski coats or just around your wrist comfortably. Attach your WiFi Remote to your wrist, arm, bike handle, steering wheel, the angle can be adjusted freely. You can see the sample photos in our official website: www.akasotech.com/14-in-1-accessory?KOL&
Mine does it too. It's because the tighter you have the mount holding it steady the more it leans off center. I about worked that out by loosening this screw as much as I could and then taking a little bit of hot glue and dragging it across the joint so it holds its position and I'm able to scratch off the glue with my fingernail without any problem or leftover glue on the camera. Takes out the problem about 98%
Read the manual... "Use brand name memory cards that meet these requirements: • MicroSD, microSDHC, or microSDXC • Class 10 or UHS-III rating • Capacity up to 64GB 100MB/s (FAT32)" www.akasotech.com/usermanual/v50x.pdf
lol and removing the waterproof case , I think it has been over tightened, omgosh its on there so tightly and no screw to unscrew like in the video , which means I'm going to have to use force / it shouldn't arrive like this
what the hell part of the bike are they mounting the camera to? my handlebars are way thicker than that and i am unable to mount my brave 4. am i missing something?
I had the same problem and also missing one mount. I used the helmet mount . I sticked it on my stem and reinforced it with tiewrap... Its super solid now.
I called their customer service today and figured out for V50 X, no need of the clip, just use the "mount 2" on 1:10, I can mount the camera without the waterproof case. The camera has a screw hole on the bottom, screw the smaller piece of mount 2 to the camera body directly, like 2:35 do, then you can mount to different thing. The video is kind of misleading of using the clips when screw on the mounting piece, V50 X does not need that step, and does not has the clips.
Buy AKASO Action Camera Accessories Kit:
Official Website: bit.ly/3glJYvy
Amazon Website: www.amazon.com/dp/B072R4SXTT
AKASO Outdoor Sports Action Camera Accessories Kit 14 in 1: For AKASO EK7000/ EK7000 Plus/ EK7000 Pro/Brave 4/ V50/ V50 Pro/ V50 Elite/CAMPARK/Go Pro Hero 5 in Swimming Any Other Outdoor Sports
Having a difficult time taking off case. The screw won't budge. Please advise as I don't want to damage the case or camera. I can't turn the screw counterclockwise... please advise.
@@richardbartell3526 Hello, please consult our customer service staff on the shopping website for after-sales problems. We will serve you wholeheartedly.
Não senti segurança na fixação da câmera. Passou a impressão de que não ficou presa suficiente e poderá cair com a movimentação do usuário.
Thanks! I'm a film student who's only bought their first video camera a few months ago(march/April 2020) and am still pretty new to video cameras. I bought this action camera in April because I have a low budget and am hoping to try it out on a beach day soon. All of the attachments were overwhelming and the instructions leaflet only showed how to charge the batteries. This video was just what I needed!
Thank you. I'm a noob to the action cam world, really helps.
I watched this video specifically to learn how to remove the back door of the waterproof case. Wow, that was easy. Thank you so much.
Thanks! That's helped a lot with how to use some of those mounts and accessories. 👍😎
Good video. Been searching for a whole and this is the only comprehensive video I found.
This video is super helpful. I was struggling with basic mounting until now. Thanks
Awesome video, very informative and easy to follow. As an over 50 yr user this made me feel comfortable. Thank you.
Thanks for this video. It was helpful.
is there an attachement to secure and hold the camera whilst snorkelling? I can't seem to find anything to fit onto the waterproof case that does this. thank you
1:10 I just bought an Akaso action cameral V50X but it did not come with Clip 1 & Clip 2 which I see that it's very useful. Where can I buy it?
Thanks a lot. Been looking everywhere for this.
Very impressed with the 4k camera , anyone out there on the fence of buying one of these camera's should do so . Really worth it for the money .
Brilliant video. Thank you.
Fantastic..!!!! Thank you very much for the tutorial, I understood everything ... 😀😀👍🏾👍🏾 Blessings
ua-cam.com/video/c2m4vWNfXc0/v-deo.html
There's no other video more useful than this out there. Kudos to akaso_official.
Quick question though. What exactly is the tether wire/cable for? Does it serve as a backup in case the camera were to fall off by accident? Is it recommended to put on the camera?
Thanks! About the tether wire/cable, ① If you want to fix the camera on the helmet, it is used to fix and protect the camera(10:35) ; ② Another use is to tie the camera to the wrist to prevent it from falling（Just like the third picture in amazon purchase link: www.amazon.com/dp/B072R4SXTT). Are these answers you want? 😄
@@akasoofficial thanks so much for the reply! I actually have the *Akaso V50x* that also comes with the tether wire/cable and I mounted it to a helmet... how would the cable be able to *protect* it?? As in, would it prevent it from falling if it were to accidentally fall? In other words, is it necessary to use it when mounting it to a helmet? It just kind of seems a bit strange with the way the tether was put on...
Also for the second case of using the tether, I tried to check out the amazon link but it said "sorry, we couldn't find that page". Is there another link for it?
@@theelectronomer2319 The amazon website have been changed and you can try to click again. It's used to fix the camera and helmet. Without it, the camera can easily fall off the helmet.
Thanks for this excellent video - faced with a boc of plastic clips that all looked the same I didn't know where to start!
HaHa~Just try it step by step according to the video. If you still confused about it you can ask our customer services for help.
Salam.. what is the best setting for akaso brave 7 le.. deep diving about 20M.. are this camera need filter? Where can i get the filter?
Thanks for sharing this Video it's very informative, how i wish that someday i could have one..
Thank you. Simple but informative!
Great. I think I might get a special helmet that supports a camera. These helmet accessories look a bit unstable. Or I'll mount on handlebar.
Thanx for the vid! as for the handle bar mount there is a rubber like inside it. do u use it also?
THANK YOU!! So helpful to beginner like me. 🙂
How can I connect it to a paddle board ? While it’s in a waterproof case ? Thank you
It took several tries to find "the best" mounting position on my e-MTB. First there was the standard "top of the handle bars" position, a PITA since there is not enough room; the bike controller display, the bike computer and the strobe head light require room!
Next was the "Top of the helmet" which works OK, but is asking for trouble if one has a crash.
Third the position on the fork beam, which was a very good POV, but problematic on very bumpy trails since both the Brave 4 and the EK 7000 had a tendency to stop recording over those trails.
What finally works best for me on the bike is the "suspended from the handlebar" position. I also added a 10'000 mAh power bank as a reliable supply.
Took a while to get it figured out, but now I get the videos I want from the POV I like.
For XC skiing I have a chest mount harness.
Forgot to mention that I'm 77, have been shooting videos since the late 80s and know exactly what I want when it comes to videos. ;)
Thank you so much for sharing all the details!! Got really impressed by your work, share more with us.
@@akasoofficial You're welcome! Video quality from the suspended from the handle bar position. Usual speed on the dusty Rail Trail between 27 and 34 km/h. ua-cam.com/video/NGSED1TcB3Q/v-deo.html
I know that this is an old thread, but trying anyway.
I just got the V50X yesterday and maybe I got something wrong - but I thought that the camera could be used for a anything apart from diving without the waterproof casing. But dang it...
Both USB ports and the SD card slot on the left side of the camera is completely uncovered - nothing prevents water, moist, dust etcetera from getting into those openings?
And the extra waterproof back for the waterproof casing...what is that for?
amaizing!!!! this helped a lot and i finally realized that some of my accessories are missing...
Thanks for your support and if you need Accessories Kit you can click the purchase Link in Description
What is the purpose of the protective back cover? It is not water tight, it has 2 slots cut into it. Why would it attach to the waterproof case?
Yes best video for showing how to use accessories 👍😉❤️
1.30 clip 1? Don't seem to have that cradle clip included in the accessories that came with the Akaso V50X
No clip 2 either, so no quick way to attach to a belt or something.
If its the v50 you have it may be that that's an old version that doesn't include it yet or it's a new version which has discontinued it. I have the ek7000 and it includes all of these and I bought mine April 2020
Hey friend, not each type of cameras have Clip1 and Clip2. And this video is to pick EK7000 as sample to teach how to install.
Very helpful! Thank you.
What is the protective backdoor for? How is it different from the one that comes installed on the protective case?
I was wondering the same thing. The one it comes with, no sound when you record video. The Extra, has two slits in back, so you can pick up some sound, but, its not total waterproof then.
I bought a brave 7 le and I cannot find a clip like the one at 1:17. I wanted to have a case or tripod attachment and be able to screw a light in on top. How do you attach a light to the camera?
I was hoping that the video would show me how to connect the camera to the body harness but it doesn't. What would also be great would be a video showing how to release certain parts.
My accessories kit did not come with the attachment to your person..how can I get that clip so I can attach to me belt? Thanks
I have the Brave 4 but even so with the exception of just a couple of the attachments the rest appear to be exactly alike. I had been wondering how to attach the camera to my bike helmet and this video definitely resolved that issue. So thank you for that! :) Just curious though in the first section when you used the tape to attach the helmet mount to the side of the helmet, just how strong is that tape and how prone would the camera be to falling off when riding on rough terrain? Because only the tape is securing the camera to the side of the helmet. I'd hate to hit a bump and have it fall off. (Oops.... LOL) I'm also curious on how to remove the clip on Mount 2 from the helmet mount when I'm finished riding or is it a case of "once that clip is installed it can never be removed"? But if it can be removed I'd really like to see a video on how to do that please. Again, thank you for the very informative video!!
What I needed! lol I found it from the official site
I was wondering how to change the back door on the waterproof case to the one with the holes in it so more sound will get into the camera. I was also wondering why the clip for the body mount didn't seem to go anywhere. Didn't realize it went into the open cradle.
I have just done A comparison between the Elite and the Pro...Check out the "4k" version guys...your cameras are STUNNING!!!
Great video Cheeers🤙
I'm trying to mount this to my handlbar but it's always swinging from side to side. I'm guessing you have to screw this in TIGHT to get it to hold.
Yes. Tightening it will help minimize shaking.
I cant take the original mount offat @0:39 . How did u take off? tried screw driver but cant!
I just ordered an v50x, and I'm wondering of i can attach it to a helmet that does not have vents? I want to use it for snowboarding, and my snowboard helmet doesn't have large vents to keep the inside of the helmet warm. Will the adhesive on the attachment keep it on the helmet? Thanks
Hello, you can use the adhesive to keep the camera on the helmet but It may not be that solid under intense exercise.
@@akasoofficial thanks, on the part where you mounted the camera on the side of the helmet, you just used adhesive, and no straps, and it seems to have worked, so I guess that it should be the same for the top. Thanks for the quick response
THANK YOU SOOOOOO MUCH THE ADVICES FOR THE HELMET HELPED ME SO MUCH THANK YOU
It's our pleasure to help you😊😊
This video is very helpful. Thanks.
What mount do I use to install camera on head strap or chest strap safely without the waterproof case because I want to use the external microphone
Same installation principle. The head strap and chest strap also have points where they can be attached to the mount.
Great informative video. It explains how to use the various mounts. I did find that I needed to order a head and a chest mount seperate. I plan on using it while vacationing in Hawaii. I plan on going ziplining and will need a helmet mount. The head mount I ordered said it will fit on a helmet. Now I'm super excited! Thanks again for the info. Also, plan on taking a segway tour. I think the handle Bar mount will come in handy.
Hope your vacation was good !
@@bobalgerian we thoroughly enjoyed our vacation, thank you!
I used the camera while snorkeling in Maui at the Molokini Crater and Turtle Town. I tried to use it for our zipline adventure, but apparently either it went into sleep mode or I didn't press the on button correctly. I didn't get any coverage. Instill have the memories, though
@@rickthibodeau9172 How did you use it snorkeling? I bought a chest mount, but I'm unsure how to mount the camera in its waterproof case to the chest mount (the mount I have is part of the Akaso Outdoor Sports Action Camera Accessories Kit 7 in 1). It seems like I really have to force it into the clip on the chest mount, so I suspect I might not have the right combination.
@@annglamgal I ended up using the yellow boy handle. Don't trust the wrist strap. It actually came off in the water. At least the boy made the camera float.
@@rickthibodeau9172 I will bring mine and give that a try. Mahalo, Rick!
Hi!
My screen of my Akaso v50x is broken.
There is any replacement?
Thanks in advance for your reply.
Hi, please email to cs@akasotech.com for assistance, they will help to solve the problem.
Im probably gonna use the helmet mount more
also, can you leave that sticky part on the helmet or should you take it off after use?
When I had a go pro the mount just stayed on the helmet… for five year LOL. The mount they give you is flat and doesn’t stick. It just falls off.
Can't find any video on how to mount to head, not helmet. Using straps.
What is the zip tie used for on the helmet mount?
That mannequin head is fab-u-lous!
what kind of screwdriver is used?
Really well done, and beautiful hands !
😂Thank you~
@akaso_official How do you recommend attaching to a Giro ski helmet? Straps like the 2nd bicycle helmet in the video?
A clip on how to open the battery compartment would be useful
it's easy, slide the battery panel (bottom of the camera)
@@ziobleed No it's not
I found it easiest to open it by inserting a fingernail, or a file or something small, into the slot closest to the edge of the camera, then pull toward the camera and pull upward. I'm not certain as to why there are two slots there, it can be deceiving, but if you look very closely at them you'll see the upper one has a little lip there to catch your fingernail on to open it. I hope that made sense and helps.
@@JasperLeroux On my keychain I have a mini pry bar that tapers to a blunt point, probably the best thing I've ever put on it. It's basically a big metal fingernail.
I use tweezers
I like the music , what is the name of it. Thanks
That's great except there are no such accessories in my kit. The helmet mount has notches which doesn't fit with the weird attachment clips supplied and "Clip #2" on the parts list which would fit this kind of mounting bracket was not included in my camera accessory kit
Hi, which model of action camera you have? Can you please send us an email to cs@akasotech.com to talk more details?
Let me help everyone here. The helmet mount they supply is flat and helmets are curved. GoPro gives to a curved helmet mount and that mount is still on my helmet after five years just sticking it on. I applied the Akaso helmet mount and it’s only sticking in about a pencil width surface contact due to it being flat. You can even see it in the video here. The place they applied it in this video is barely making surface contact with the helmet. They smushed it against ridged areas of that helmet LOL. My Akaso fell off while testing over carpet. Doesn’t it strike you off too that they are recommending using a zip tie??? Seriously??? I might as well just use duct tape and wrap is around the helmet and camera three times and call it a day…
How do I use the body clip with the waterproof case?
just bought this camera new in the box for 40$.very happy.
Thank you, I've had mine months and ended up just putting it away as I didn't know how to mount it to my bike, 😁
😂😂😂
They obviously need a disclaimer on the ad.... some cranial function required for operation and mounting
Didn't expect mounting to helmet is that simple.
Very helpful bro
How do you mount this to head strap? I am using it for hiking and fishing so I don't have any helmet :D
Hello, you need to buy head strap: www.amazon.com/dp/B072R4SXTT
I couldn’t get the stand thing how do I get it off?
my ek7000 did.t come with a threaded clip like on the helmet portion for top mounting. It just came with one with a hole in it and I can't find a use or reason for that...did I get a faulty piece?
and how would I go about chest mounting it for things like snorkeling?
Hi, the accessories in the video are from an extra accessory kit, not directly coming from the camera package. www.akasotech.com/product/14-in-1-accessory-kit.
For the accessory that comes with the camera, please check this video. ua-cam.com/video/putt0NrJKXI/v-deo.html
A great video, but after all that, I think I will use the handlbar attachement instead. Thanks.
Great review and tutorial youn man
Thank you👊
Is it for vertical walk tour as well?
Yes but you need to fasten the camera
@@akasoofficial to avoid movement?
@@SheckleRFan715 You need to fasten the camera so that it doesn't fall off while you're moving
Great video, thanks
Good tutorial. I mounted on the helmet, but if you ask me it is not good at all.
1.Your head is geting heavier a lot.
2.The strips that actually hold the whole camera is moving because you can't tight enough for don't allowed camera to move while you drive on bumpy road. That means your camera is not firm on your head and your videos will be bad.
3.The yellow bolt where you put camera it is not se cure enough.
Can these cameras be attached to a moving car inside or out?and what’s the price ?
There are Dash Cam from AKASO, are you interested in these products? ua-cam.com/video/jIdDdDLRcRU/v-deo.html
Hello. I would like to ask how do you mount the camera on the surfboard
At present, there is no video tutorial about this. Maybe I can ask the Video Production Team to make a specific one. Please stay tuned and thanks for your support.
My God thank you..Seriously... :)
ua-cam.com/video/c2m4vWNfXc0/v-deo.html
Could the mount on the bike thing work for a gun barrel?
I just measured the mount with the screws fully compressed and the the mount can squeeze onto a cylinder or barrel as small as 5/8 of an inch in diameter
The cool thing about mounting to a gun barrel is that it can mount to the bottom and still have the camera facing upright considering the camera bracket has a top and bottom mounting point for the bracket. I imagine it would work really well on a gun.
Nice demo video.
Love the song
where do i find and buy more of the clip1 accessory without buying a whole new accessory kit or camera
Hello，there seems to be no separate clip 1 to buy at present.
@@akasoofficial please work on making those available I'm sure they would sell on amazon
@@DmanDingo Thank you for your advice.
I want to buy all part of accessories Akaso V50X like a Battery,Housing waterproof,softcase in your store... But dont see it there... Why??
Hello, now the Accessories Kit link has been added to the description, you can click to purchase.
Is the bike mount reusable
Bateup Brigade yes why do you think not
ua-cam.com/video/c2m4vWNfXc0/v-deo.html
Is it fot for brave 7le?
Hello, it's suitable for AKASO EK7000/ EK7000 Plus/ EK7000 Pro/Brave 4/ V50/ V50 Pro/ V50 Elite/CAMPARK/Go Pro Hero 5 in Swimming Any Other Outdoor Sports
Where to attach wire cable for motorcycle helmet please?
Hi, maybe you can click here to see our 14-in-1-accessory-kit: www.akasotech.com/product/14-in-1-accessory-kit
very useful video thanks
I can't figure out how to use the back door with the slot cut outs. In the video it shows you how to remove and attach it, but in the video they change out the same door and not the one that comes in the kit. I don't understand what the slots are for when it's a waterproof casing?
Hello, We are recording operation videos of different models of action cameras. If you are not in a hurry, please wait for the operation instruction of the latest operation video. If you urgently need to solve the problem, please contact our after-sales service team (cs@akasotech.com), we will serve you wholeheartedly. Thank you.
The slots are for attaching to a body Harness
@@StephenSmith-bu9ux, oh damn. You're right lol
What do you use bandages for ?
Hello, the bandages are WiFi Remote Fastening Tape Wrist Strap: Long enough to fit around bulky ski coats or just around your wrist comfortably. Attach your WiFi Remote to your wrist, arm, bike handle, steering wheel, the angle can be adjusted freely. You can see the sample photos in our official website: www.akasotech.com/14-in-1-accessory?KOL&
thank you
For the bit to mount the camera on the helmet mount, I cant get it to be centered, it's always at an angle whenever I screw it in
Mine does it too. It's because the tighter you have the mount holding it steady the more it leans off center. I about worked that out by loosening this screw as much as I could and then taking a little bit of hot glue and dragging it across the joint so it holds its position and I'm able to scratch off the glue with my fingernail without any problem or leftover glue on the camera. Takes out the problem about 98%
VIVITAR
DVR 757HD
I keep buying the wrong SD card. How do you do find the right one?
Read the manual...
"Use brand name memory cards that meet these requirements: • MicroSD, microSDHC, or microSDXC • Class 10 or UHS-III rating • Capacity up to 64GB 100MB/s (FAT32)"
www.akasotech.com/usermanual/v50x.pdf
so mine is the box housing backwards to this diagram/ and I cant get off the mounting plate/ lol
lol and removing the waterproof case , I think it has been over tightened, omgosh its on there so tightly and no screw to unscrew like in the video , which means I'm going to have to use force / it shouldn't arrive like this
what the hell part of the bike are they mounting the camera to? my handlebars are way thicker than that and i am unable to mount my brave 4. am i missing something?
I had the same problem and also missing one mount. I used the helmet mount . I sticked it on my stem and reinforced it with tiewrap... Its super solid now.
Hi akaso_official, Cool video. Could you please add the purchase link as well?
Thanks!
Yep, So I added the Accessories Kit purchase link in description. Now you can click the link to buy it!😀
@@akasoofficial Thanks human!!!
Wow very nice......
Well done
I need help
Where can i find just the attachments,I have the cam already
Hello, now the Accessories Kit link has been added to the description, you can click to purchase.
@@inna.rudenko8571 I own a Canadian powerbank
I called their customer service today and figured out for V50 X, no need of the clip, just use the "mount 2" on 1:10, I can mount the camera without the waterproof case. The camera has a screw hole on the bottom, screw the smaller piece of mount 2 to the camera body directly, like 2:35 do, then you can mount to different thing. The video is kind of misleading of using the clips when screw on the mounting piece, V50 X does not need that step, and does not has the clips.
Thank you so much.
There’s also no clip 2 though, which is useful for quickly clipping to a belt or whatever.
this vedio is helpful
Thanks a lot!
ua-cam.com/video/c2m4vWNfXc0/v-deo.html
😻😻😻 Thank you ❤️😻😻😻😻😻
Thanks for the info. By the way, they sell nail clippers on Amazon also......... Get them!
I saw the same.