Check out my Cadillac playlist and look back at some of the first wrap and wrap removal videos for our 2016. In one of them, I know I show some tips for taking the panels apart to get to the camera area
I am interested in replacing the front Emblem with the led one for my 2020 Cadillac XT4 What I do not understand is what wire do I connect the led emblem to???
Illuminated emblems usually have a plug and play kit to attach to the headlight or DRL harness. Cheaper ones sometimes have poor instructions and intend to have you use a fuse tap for the headlight or DRL fuse in your fuse panel.
Thanks for the video, very informative. I have a 2020 CT4-V and want to change the rear and front emblem as well. Do you know if the front has the clips as well? Also where can I purchase the emblems.
Try this code to save some money : DON404 404parts.com/collections/ct4/products/2020-2022-ct4-monochrome-emblems The clips are a little different but the same idea
Thanks for the post. Trying to do install myself on rear emblem. Removed screws/bolts from rear appliqué but can’t seem to remove panel. Do you need to use a good amount of force to remove? I’m guessing the replacement tabs provided are what’s holding the panel in place and these are likely to snap with the pressure ? Appreciate your help !
You can use some force and pull the corner out where the handle is. After you remove the screw of course. After that some pulling force, or if you prefer a long flat tip screwdriver can pry the clips out on by one. The replacement clips are for the top rectangular piece
@@Donslife thanks Don. I have the plastic interior panel removed. It’s the rectangular exterior piece I’m having trouble with - removed bolts on either side of lift gate and removed black nuts (8 total) from the inside of panel.
Hey, there are some small round pointy plastic tabs that when squeezed together they’ll pop out of the hole. These are the ones they give you extra ones for. You can see them if you peak through the other access holes you used to get to the black nuts. I used small needle nose pliers to get them
I think I just made a mistake in buying a front LED emblem from that LEDfloatingcaps company. I have a 2016 Escalade. Is the part your using OEM? Where did you buy it? will it work on the 2016 Escalade model? More specifically talking about the front emblem.
linktr.ee/donslife - Links to all of my products and discounts
Man that looks great, what a unique wrap!
do you have a video on how to replaced a rear view camera of the 2018 Cadillac Escalade ESV.
Check out my Cadillac playlist and look back at some of the first wrap and wrap removal videos for our 2016. In one of them, I know I show some tips for taking the panels apart to get to the camera area
Very nice escalade
Those color emblems was very very nice why did u change them ?
The black piece that attaches to the emblem with the camera. Where can I get that black piece from?
I think you could find it from an online genuine GM parts dealer
I am interested in replacing the front Emblem with the led one for my 2020 Cadillac XT4 What I do not understand is what wire do I connect the led emblem to???
Illuminated emblems usually have a plug and play kit to attach to the headlight or DRL harness. Cheaper ones sometimes have poor instructions and intend to have you use a fuse tap for the headlight or DRL fuse in your fuse panel.
@@Donslife which led emblem fits a 2020 xt4 I am having a hard time finding one.
I don’t know of one either
Your Escalade is amazing 🔥🔥🔥
Thanks 😊
Great installation video. Question, on the front emblem that was removed, if the clips were broken can they be replaced?
Unfortunately the clips are tiny and part of the housing and can’t easily be replaced.
Already a nice vehicle but the monochrome is really nice.
Thanks brother
Can you get the new front emblem to light up?
The GM made ones don’t (at least what’s available now)
Thanks for the video, very informative. I have a 2020 CT4-V and want to change the rear and front emblem as well. Do you know if the front has the clips as well? Also where can I purchase the emblems.
Try this code to save some money : DON404
404parts.com/collections/ct4/products/2020-2022-ct4-monochrome-emblems
The clips are a little different but the same idea
@@Donslife Thanks, tried the code and it did not work!
The code is new for a collaboration I am working on. It may not be active yet. 🤷🏻♂️
where can i get those badge i try to find on amazon but cant find right size can you pls help me out
You can get these ones right from a Cadillac or GM dealership
Thanks for the post. Trying to do install myself on rear emblem. Removed screws/bolts from rear appliqué but can’t seem to remove panel. Do you need to use a good amount of force to remove? I’m guessing the replacement tabs provided are what’s holding the panel in place and these are likely to snap with the pressure ? Appreciate your help !
You can use some force and pull the corner out where the handle is. After you remove the screw of course. After that some pulling force, or if you prefer a long flat tip screwdriver can pry the clips out on by one. The replacement clips are for the top rectangular piece
@@Donslife thanks Don. I have the plastic interior panel removed. It’s the rectangular exterior piece I’m having trouble with - removed bolts on either side of lift gate and removed black nuts (8 total) from the inside of panel.
Hey, there are some small round pointy plastic tabs that when squeezed together they’ll pop out of the hole. These are the ones they give you extra ones for. You can see them if you peak through the other access holes you used to get to the black nuts. I used small needle nose pliers to get them
I think I just made a mistake in buying a front LED emblem from that LEDfloatingcaps company. I have a 2016 Escalade. Is the part your using OEM? Where did you buy it? will it work on the 2016 Escalade model? More specifically talking about the front emblem.
He shows the emblem directly from the Cadillac website. Front and back set runs about $200
Looks more aggressive
I agree