It looks like he has the K5 Blazer emblems on the side which means this would have been a Blazer-to-pickup conversion. That said, I'd leave the tailgate alone if it were me...sweet rig! And the front bumper mount was a huge win!!
Really love the extra cab lights on the cab. Over all one of his best looking Trucks he should be very proud of it and hold on to it. Make it better for him. Thanks for sharing your videos with us.
I have a 78 Windor Motor Ford f 150 looks juss like tha only its in red w brown/yella pin stripin , hopin to lay a nice wood plank bed liner sometime soon. hell ya nice RC model 💪👊🔥💨
I'm gonna take a guess and say your friend does his own reloading/handloading and casts his own bullets. It was funny. Before you mentioned it, I noticed the lead ingot glued under the bed. I noticed it says Lyman on it. Lyman is a handloading supply company and that was molded in one of their ingot trays for making cast lead bullets. Either that, or he just bought it from someone else. It was just cool seeing something of two of my hobbies in an RC video. Thanks for another fun video. 🤘
Just a tip for next time. I use the tip of my hobby knife to get the double sided tape backing to peel back. I carefully probe into until I get it to peel back. I get my Scottsdale on Wednesday hopefully. So stoked for my first scaler
Man I do like the K10 Chevy truck man they are right about the way they came on with the Chevy pickup truck and the other ones they are still awesome looking rc rigs. They are kicking up
That's a sweet rig, I really like the cab lights. I think you should add one of those cop spot lights that mounts to the driver's side door and an old school bent CB whip antenna, they certainly fit with aesthetic of the build. I also think a couple round lights inside the hoop of the front bumper would look cool. 👍👍
Get yourself a set of ball-end drivers for those fasteners that are in places where the driver can't go in straight. They've saved me from some headaches in the past for sure.
I like the cab roof lights. This truck is a good counter part to Shiny. The rims/hub combo is great. I like the utilitarian look with the pieplate hubcaps.
I think that the two-sided tape for the toolbox probably would have worked well just putting a couple pieces on the bedrails instead of down in the bed and having to double it. Nice job though. Liked the video.
I wasn’t able to order the shiny new rc4wd truck due to unforeseen circumstances. I hope to have a chance to pick one up next time they in stock. I’m devastated but will get over it. Sh%t happens we deal with it right 🤣
I like the top lights and bumper. I don’t own a tool box but would be nice to see it removable from the inside by lifting the lid but if is a solid piece then it would take a little more fabrication.
It would be a lot of work, its just a matter of time RC4wd will have a kit version and a body set available separately that will be ready to paint and assemble. Im waiting on that and saving my blue one for another project.
what a nice chevy 😍😍😍 ... the new driveshafts you are using are shitty! i throw them out of each of my trucks ... i only use the steel injora universal-drive-sgafts, they they last the longest
Uh. Josh. If your touching it. It's got to go back with Texas license plates....❤
Awesome Josh oh yeah I’m here watching, got my Yoda 2 rear axle for my rat rod today
Your scale setup is so good, it freaks me out when I see a big finger come from above. Lol. Well done!
That is a great trick using the lighter to get at the cover strip on the double sided tape. Thanks for sharing.
It looks like he has the K5 Blazer emblems on the side which means this would have been a Blazer-to-pickup conversion. That said, I'd leave the tailgate alone if it were me...sweet rig! And the front bumper mount was a huge win!!
Really love the extra cab lights on the cab. Over all one of his best looking Trucks he should be very proud of it and hold on to it. Make it better for him. Thanks for sharing your videos with us.
I love that 3M emblem tape as well for RCs. Great stuff!
I have a 78 Windor Motor Ford f 150 looks juss like tha only its in red w brown/yella pin stripin , hopin to lay a nice wood plank bed liner sometime soon. hell ya nice RC model 💪👊🔥💨
I'm gonna take a guess and say your friend does his own reloading/handloading and casts his own bullets. It was funny. Before you mentioned it, I noticed the lead ingot glued under the bed. I noticed it says Lyman on it. Lyman is a handloading supply company and that was molded in one of their ingot trays for making cast lead bullets. Either that, or he just bought it from someone else. It was just cool seeing something of two of my hobbies in an RC video. Thanks for another fun video. 🤘
Just a tip for next time. I use the tip of my hobby knife to get the double sided tape backing to peel back. I carefully probe into until I get it to peel back. I get my Scottsdale on Wednesday hopefully. So stoked for my first scaler
That's is a very nice looking rig and your rc garage shop and TF2 and TF3 all it's awesome man
Man I do like the K10 Chevy truck man they are right about the way they came on with the Chevy pickup truck and the other ones they are still awesome looking rc rigs. They are kicking up
That's a sweet rig, I really like the cab lights. I think you should add one of those cop spot lights that mounts to the driver's side door and an old school bent CB whip antenna, they certainly fit with aesthetic of the build. I also think a couple round lights inside the hoop of the front bumper would look cool. 👍👍
Get yourself a set of ball-end drivers for those fasteners that are in places where the driver can't go in straight. They've saved me from some headaches in the past for sure.
Right! I have 1 ball end. No clue where it came from. But I do need more sizes
Did body work for years, wish I had known the lighter trick with the double sided tape.
Nice work man!!!!!!!!!
How about installing a long whip antenna. I think that would look good on it. Go old-school from the rear bumper bent down to the front bumper.
I like the cab roof lights. This truck is a good counter part to Shiny. The rims/hub combo is great. I like the utilitarian look with the pieplate hubcaps.
I think that the two-sided tape for the toolbox probably would have worked well just putting a couple pieces on the bedrails instead of down in the bed and having to double it. Nice job though. Liked the video.
I wasn’t able to order the shiny new rc4wd truck due to unforeseen circumstances. I hope to have a chance to pick one up next time they in stock. I’m devastated but will get over it. Sh%t happens we deal with it right 🤣
I like the top lights and bumper. I don’t own a tool box but would be nice to see it removable from the inside by lifting the lid but if is a solid piece then it would take a little more fabrication.
I don't know why I laughed seeing the Lyman lead weight. I have a ton of lead, but for my other hobby.
"Bubba Gump Bumper" lol
Really like the new Scottsdale that’s coming out. Noob question, if I don’t like the blue, can a hardbody like that be color changed?
It would be a lot of work, its just a matter of time RC4wd will have a kit version and a body set available separately that will be ready to paint and assemble. Im waiting on that and saving my blue one for another project.
@@RCeveryday Makes sense. Thanks for the info
where did he get the cab lights they look sweet
Not for sure, they are 3d printed, I know that.
what a nice chevy 😍😍😍 ... the new driveshafts you are using are shitty! i throw them out of each of my trucks ... i only use the steel injora universal-drive-sgafts, they they last the longest
What wheels and hubs are those? Love how they look.
Boom racing 1.55. The hun caps are part of the wheel. They are excellent quality
@@RCeverydayI'll have to check them out for a build I'm doing on a Phoenix.
If I may ask, where did you get the lights on the top? 4 orange lights?
I believe those were from someone that made custom parts for the cenracing f450. Its been a long time since he built that rig
@@RCeveryday got it luv it bud keep doing what you do!!
How do I find interior for a trx-4 high trail addition k10 RC truck
Im not sure Ive seen one yet. I know there was one out for the traxxas blazer body. Think it was on ebay from china
His channel doesn't come up when searching Everybody's Scaling
I think his youtube is juiceboxrc. There is a link in the description to his articles for Bigsquidrc that is everybodysscalin
What skid plate is that?
its from tiny truck nuts on instagram, I have the steel version on one of my tf2's