nxp200 Mobigital Build - Mobula7 + Caddx Vista
Вставка
- Опубліковано 29 сер 2024
- I wanted to have a small tiny whoop to fly around the house with DJI digital video, so here is the nxp200 version of the Mobigital Build. The original Mobigital was the design of Dax Niel, so thanks to him for the idea! I used Dax's and Nick Burns' videos to help me put this together, so I hope someone else finds this helpful too. It's a great little digital whoop and I love flying this around the kids playgrounds, backyards and in the house.
Dax Niel's Mobigital Video:
• DJI Mobigital 7 Build ...
Nick Burns' Mobigital Video:
• DJI Whoop // Mobigital...
AliExpress items used in this video:
M1.6 nuts
s.click.aliexp...
M1.6 20mm screws
s.click.aliexp...
CADDX Nebula Pro Nano Camera:
s.click.aliexp...
Free 3D print STL files for parts in this video:
www.printables...
I love that idea of series BT2.0 plugs!! I didn't even know that was even a possible! Niceeee!! Great job on built this one, love it every second of this video, dude!! 👍🏽👏🏽👏🏽👏🏽👏🏽👏🏽
P.s. you got yourself a new subby (me!) 😂 good job! 👏🏽👏🏽👏🏽👏🏽
Thanks mate! 👍
@@nxp200 your welcome! 🤙🏽
At 29:55 I'm looking at the damaged antenna thinking "did he just do that, and not know?" And your text appears acknowledging the damage. You can remove the whole plastic housing(usually incorrectly referred to as ceramic) and replace it with a 31mm enamel wire, or really any small gauge silicone wire. I did this on all of my x12 boards that I run HD VTXs on because the antenna was blocked by the VTX mounted above it and my elrs would lock out 10 feet away at 50hz 250mw. After antenna swap I am able to run 500hz 25w and have enough range to suffice my vista air unit. Oh, and I too have used the BT2.0 on 2s. Long as the amps don't exceed 10 the voltage doesn't really matter.
Going to give it a try you made it look so easy i need me the mobigital !
try some more powerful motors it might give you abit more control or are you worried about the flight time? cool build though i like it im thinking of doing something similar with the naked vista:p
I could try other motors but I also like flying this thing indoors, so larger motors would be a bit too much for tight spaces. Have any suggestions though? Always keen to hear what others have tried. It is a pretty fun rig and I definitely recommend building one if you have the patience and know how. Good luck 👍
Anyway to get O3 addition ? I really love your video and explaination that keeps showing all dangerous parts to avoid
Hi, thanks for the tutorial! Could you please add updated stack cover (with slots for camera mount) to your printables repository? Maybe any other updates on mobigital project tpu parts?
Sure. I'll update and let you know shortly
Done! You can find the STL in the same listing now as the model file name "Mobigital Stack Cover v9.stl". No other updates on the 3d printable parts because all those parts have been working great and nothing has needed replacing even. I've flown this little drone heaps and bashed it a lot too, still going strong!
@@nxp200 Thanks a lot! Very nice design with extra protection for lens and vista pcb! Glad to hear that durability has been proven over time!
nice clean build, Which camera are using on the Caddx Vista? has anyone modded a Happymodel Mobula7 V3, also what small Antenna did you use?
Camera is the Nebula Pro Nano. I haven't seen anyone mod the actual Mob7 V3, but I really like the durability of the frame. The small antenna is a standard linear whip antenna. Works well with the Goggles 2.
I do the same caddax mod seen in mobula 7 and do it 2s with dji v2 glasses and I can't see the osd, because it may be Connect the Rx to tx well and vice versa
You'll need to root the Goggles and install wtf.os to get OSD on goggles V2. Joshua Bardwell just released a video on how to set this up ua-cam.com/video/tqiDspQoKDA/v-deo.htmlsi=Xghi3n0DTjutuRNz
What's the advantage of BT 2.0 plugs over one xt30 plug for a 2s battery?
Main reason was at the time I couldn't source 300 mAh High Volt 2S batteries where I am. In fact they're still hard to find, although there are more these days. The other reason is lighter weight. 2s batteries come with extra battery lead lengths and the balance lead. Also I'm cheap 😂 and like to reuse what I have on hand
@@nxp200 fair answer I was just curious I’ve seen a few builds like this. Definitely a little lighter with that setup. I am going to build one soon. I have a vista I don’t really use anymore and want a nice small whoop. I will be following your video during my build. Thanks
You know what , this video really really amazing to see with every detail that newbie needed , subscribe+
Ahhh you have a O3 version as well ? I seel vista for O3 because I like internal recording with high resolution
Thank you for the sub!! I haven't made an O3 whoop yet but I would like to! They aren't cheap. Haha. Maybe one day. If I do, I'll definitely do a build video like this.
Nice! How much does it weight? I bought the Flywoo firefly nano 20 elrs dji nebula pro nano it is 49.5g. Flies well but I want to convert it to Mobigital on weekend...
Without batteries 44.77g. Using 2 of the 300mah 1S Tattu batteries, it totals at 61.01g.
Would you recommend 1102 9000kv or 10000kv for balanced power and efficiency?
I personally go for the higher kV motors and reduce motor throttle output percentage down if I need to. I haven't seen much efficiency differences between motors of similar kV and prefer to have the option of reducing a higher kV, since you can't increase the lower to match the higher. Example, you can reduce 10,000kv to 9,000kv using motor throttle output limit, but you can't increase 9,000kv to 10,000kv. So I would go the 10,000kv. Hope that helps!
Could you please share betaflight settings/pids/diff?
🧐🤔
Apologies. Been quite busy with family etc. Will try to upload later today
I've added the diff to the printables listing for the Mobigital7 3d parts:
www.printables.com/model/467245-nxp200-mobigital-conversion-kit
Please keep in mind it's a pretty standard tune with my personal rates etc.
@@nxp200 Thanks!
Thanks! I was also looking for these to see if I can improve my own pids. Was wondering if you did any special tuning (with blackbox)?
Would this work with the Mobula 8 analog version
The Mobula8 uses the HappyModel X12 flight controller as well, so I think it should be possible. I haven't worked with the Mob8 frame before, so you'll have to work out how to mount the camera and battery etc. Good luck! Would be a great quad to fly 👍
Two questions please, Where are the STL Files please, and would this conversion work using a BETAFPV Meteor 85 (2022 model)?
Sorry, the STLs will be uploaded in a few days cause I've gone away on holidays for a few days. I believe the meteor 85 will also work with this conversion since the flight controller mounting is also 25.5mm X 25.5mm.
@@nxp200 , do you think the standard meteor 85 motors will be enough to lift the quad?
@@fredkaz245 I think so. With 1103 11000kv motors, which I think the meteor 85 has, it's on the slightly heavier side, but it should work alright.
@@fredkaz245 have to given it a try ? I also want to do it with the meteor85
@Fred Kaz STLs have just been uploaded:
www.printables.com/model/467245-nxp200-mobigital-conversion-kit
Also added to the video description
I am working on setting up an identical build and cannot get my OSD working in my vista with goggles 2. Any ideas?
Which version of Betaflight are you on?
@@nxp200 4.4.1
@Nick Zagorianakos check my other video ua-cam.com/video/WjS-d4_Es9w/v-deo.html
I found there is a command to be entered into the CLI as well:
set osd_displayport_device = MSP
save
I believe this can be avoided by using presets specifically for the Vista OSD setup, but I haven't tried yet.
@@nxp200 that worked, thanks so much!! Looking forward to you posting those STLs :)
@@ngz0128 STLs have just been uploaded:
www.printables.com/model/467245-nxp200-mobigital-conversion-kit
Also added to the video description