1400HP Turbo Jetski Runs 142MPH in 3 Seconds! (Fastest Jetski EVER)
Вставка
- Опубліковано 19 жов 2023
- (update: the event officials overturned the decision and jose luis’ run counts). On this episode we're back with the FASTEST jetski in the world! After a 3 year hiatus we head out to Hydro-drags presented by Fizzle Performance to document the craziest jetski racing on the planet. These Skis are running 4 cylinder engines, massive turbos, 68+PSI of boost, methanol, AND nitrous!
Thumbnail photo by: MVP Productions (Manny Valdes) - Авто та транспорт
That's was history being made! Thank you as well for the talk and checking on my jetski! 🎉
🇧🇷🇧🇷🇧🇷
🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
Só Deus sabe se vai responder mas vamo lá. Anderson, na arrancada quando o carro passa na linha de chegada aparece pra todos o tempo e velocidade, no jet não tem como fazer isso? Não acabaria com a confusão do gps?
Absolutely mental mate! Well done it’s a seriously nice machine! I’m watching from Australia and just spent 6hrs in a 4hp boat so that looks pretty fast by comparison!
@@paulosalazar9490sim, inclusive é o que tô ajudando eles a implementar para ano que vem, vai ajudar muito saber o tempo, brigar pelos recordes!
That guy that started to complain about the run not being legit because HIS gps wasn’t on the ski is ridiculous when there are two official gps confirming 142mph
Just argues because he knows he's wrong and got beat 😂
He is definitely got the complaint down, someone buy him a gps and tell him to stfu and get over himself.
Want to make a grown man act like a baby? Beat his record. Lmao
yah real male Karen
Yall even know him ? Lmao he holds the world record of course he wants his gps you guys talk with. Out knowing 😂
i could only imagine how sketchy thatd feel- 70 is fast as hell on water alone
Ya, I've been up to 76 on a rxt, stock engine/supercharger just upgraded jetpump...deff wild
Literally twice as fast as 70 lol
35mph on choppy water got me scare asf
Yeah, that’s for me, over 85 my jaw is TIIIIIGHT.
I've only gone about 40mph on a rental. 140mph seems unbelievable.
I just gps'd my 26cc two stroke rc boat and it went 39mph. I was stoked. This is insanity
39mph on the water is moving.
@@AP-op4rc ua-cam.com/video/vENfZoEtxHw/v-deo.htmlfeature=shared
That's the video. First time driving and filming with the transmitter mounted phone
Dude I've done 70mph on the water and feels amazing. I can't even imagine how nuts this is.
@@Hawk7886 my cousin and his dad are charter fishing captains and they get new flats boats every year with gnarly Yamahas. I've been 68 mph in a 21ft pathfinder and it was wild
Dam, you're RC goes faster than my jet ski.
I read the title and then had to read it again out loud to myself. FOURTEEN HUNDRED HORSEPOWER JET SKI!? WHAT!?
Didn’t know people modded jet-skis like this, dope as hell
Same exact principles as any other gasoline-powered four-stroke engine. Moar powerrrrr
This over 100 mph racing is still pretty new. They have improved so much in the last 5 years. It is cool seeing someone take what most struggle to put under a car hood, and jam it in a ski.
There are guys who put these motors on a 6 foot 2×6 and fly down rivers!
I’ve been over 200mph on a superbike, and nearly 100 on a turbocharged jetski before. But 142mph!!!! Daym. I can’t imagine what that water feels like like at that speed
That one Anderson built is sick! TY for sharing!
Jose killed it!!! It is unreal how far mechanics have come in my life time. 142 on a ski is nuts!!!
Engineers 1st mechanics 2nd
@@Anotherdaynparadise nah both are equal. Without the engineer, there wouldn't be a jet ski. Without the mechanic, there wouldn't be a running jet ski. Need both
@@user-hz4rk2nu4m You need both but they are not equal by far.. the engineer can learn to wrench on a jet ski real quick. The mechanic cannot learn to be an engineer that quick. The mechanic cant do it without the Engineer he needs him more than the engineer needs him.
@@Anotherdaynparadise I disagree. You must not have been around too many engineers. They rarely have professional level wrenching skills. At the very least they are no where near as efficient as a professional mechanic with experience. Wrenching on your toys in a garage is a different thing than being a professional mechanic. Engineers like to sit in front a computer all day in front of a desk in a comfy office and in a comfy chair and not get their hands dirty . And I’ve met plenty of smart mechanics that could learn engineering if they wanted to they just prefer getting their hands dirty to sitting in front of a computer all day .
@@user-hz4rk2nu4m Sure but not equals. engineers need a higher IQ than a mechanic does. They are different animals one is typically smarter than the other. An engineer that isnt smart enough to get a degree and didnt make it in school can always be a mechanic
Cool compound turbo supercharger talk :).
17:17
Live a quarter mile from that lake and you can hear those beast making passes. So 🔥 🔥
1400 hp out of a 1.8L turbo 4 cylinder... that's insane
People have done 3000hp
promods and tx2k lambos put down 3500-5000hp dragsters put down like 50,000 hp shits fast nowadays.
@@jamesclark4Link?
Are you kidding? Go watch 1320's videos. They are FULL of 4cyl import cars that do 2000-3000 hp. You wouldn't be doing that on a ski...not that you could hold it.
@@whalecoooter we are talking about jetskis, not jet planes
I’ve been 240kmh on a track in my 97 Bseries civic. 142mph converts to 228kmh (sorry I’m Canadian) and that felt absolutely insane. I couldn’t imagine that on choppy water
That's my thought, going fast in a flat road is already scary, imagine with your vehicle jumping waves... Seems like a bike that always wants to do a wheelie.
@@ConanOG I could imagine you have to be very skilled on the throttle. 1400hp is nuts on a machine that weighs 900 pounds. If you whisky throttle a 2 stroke dirtbike you’ll end up on your back… I couldn’t imagine trying to control this
You went 149mph in a N/A b series?
@@omarthegrower yes sir. B18C JDM type R swap. They top out around 240kmh in 5th on redline at 9000rpm
ua-cam.com/video/6ZAgqp2ciSI/v-deo.htmlsi=XqqMBYJ3-_P9iZZY
Edit: here’s a link, not my video but I had the exact setup
The vx/gp has the best hull. The faster you go the better it feels. Feel like a freight train moving over the top of the waves.
I think we're at the point of adding some aerodynamic down force before one goes airborne. Godspeed guys.
Have to wear special water proof underwear because if you fall off at speed, you could receive the world’s most violent enema.
😂😂😂😂👍👍
@@steveafanador6441 Funny but actually true also lol.
If you fall off your dead
@@zenithskull It would largely depend on how you hit the water
You are definitely getting hurt, guaranteed.
What a video🔥 these ski vids are my favorites
Most people cannot comprehend how insane this is on the water.
Unreal! Can only imagine the speed if the water was calm👍👍
As an avid ski guy in the Midwest (and now 40 y/o, and a diesel guy by trade (back pressure) ) this reminds me of the original hype of the oringinal FAF!!!
Has anyone tested straight leg hydro foils like the boats?
Anderson, you are my PWC hero brother!!!
never thought a jetski could move that fast 🫣
I freakin love this channel!!!
this is epic content and that dude was super chill.
These dudes got brass balls... Insane. Imagine eating sht on the water going 130 + ☠️
It's amazing they can hold on 😅
DMO would love this
Damn that’s quick! not just for a jet just anything! It’d pull some serious g force!
Imagine that power on a Snowmobile!
These dudes are crazy! I would never do 142mph on the water… ☠️🤘 i would want the lake as smooth as glass with no wind.
Nearly 70psi and 1400hp🤯🤯
Miami in tha House 💪🔥
Fueltech🇧🇷
Amazing 😮
Carlito punching the air rn.
AWESOME content, brother!
#fueltecheverywhere
That machine sounds insanely pissed off 🔥
Crazy! Balls of steel!
Love the compound setup from fuel tech guys. Thats an awesome rig.
Just imagine a 13\20B or quard rotary setup bonkersss
All I can think is how much it'd hurt to hit the water at 140mph
Dude same
Tyreek hill of jetskis out here
Very impressive! The speed and th Yamahas compound setup. Why doesn't anyone run a Kawasaki hull being that it goes fast thru the choppy stuff?
Kawasaki hull is too slow. You will never win top speed shootout on a kawi (but they do make an excellent offshore boat.)Yamaha GP18000R is king of speed.
Dam 142 mph that's pretty fast
I don’t think most ppl realize that one slip up ? And ur done . U hit the water w that much speed good luck trying to find pieces.. w that being said .. u have to be nuts wanting to go that fast on the water .. which is crazy 😜 hates off to these guys
Water surface acts like concrete at a certain speed.
Many people don't think about that.
I've been watching this fueltech compond jetski on Anderson's channel and it looks like a great idea on paper but it broke every time it went into the water so it hasn't been proven to work yet.
By the way my stock Yamaha GP1800r with over 300hp almost maxs out at what that dude was doing making his turn leading up to the fast run. He was doing almost 70 and that is what the fastest stock skis will do stock. Around 70-78mph. And that’s on glass, not on a rough day either.
unsure if Puerto Rican or Cuban... but they always get LOUDER and LOUDER when they talk. always a spectacle~! LMAO on that choppy water?? holy heck NO!!!! 142mph... good Loord!
👏👏👏👏👏 FuelTech
There is video Footage of Carlitos GPS falling off on the first attempt. The jetski shut off. Its on Calas World channel
It still went 142
I thought you spoke spanish javier especially living in south florida ?
Anderson! 👏🏻👏🏻👏🏻👏🏻🇧🇷🇧🇷🇧🇷🇧🇷
Skipping at over a 100 takes huge ba11s
Anderson is the man!!!
Those are like the boats in Thailand. Insane engines in a sketchy looking light weight boat lol. This micro jet ski puts out 1400hp. Well, street bikes like the h2 that's supercharged doesn't put out half that power. This is insane! Like a fully built tuner engine in a tiny light weight jet ski.
Throw ICE on that meet 😂
oh i really wish you would. The noise level of mouthy Spanish people would drop by 89%.
i've been on a bass boat doing 50mph and that felt fast and a bit sketchy. 142mph on water on a jetski is probably scary af lol. some people don't understand that on water going 50mph feels fast and sketchy lol
Time for a Billet Block
They are billet blocks. A big piece of aluminum/iron/steel is called a billet. Once it's machined into an engine block, it's a billet block. Those jetski's all run aluminum.
Wonder if they could use flotation devices with sprung rods, in order to make wheelie bars?
Anything accomplishing an "anti-wheelie" effect would induce tons of drag. Imagine drag racing where you sink a couple inches below the tarmac and the surface constantly changes.
No need on the water, jet skis work with thrust. There is no torque to pull wheelies on the water
The rods in those blocks are the size of your hand. Maybe use them for new vertibrae when you wipe out and break your back in 29 places?
That’s like 300mph on land or at least that what it would feel like anyways. That’s rocking on water.
It's amazing these things can reach 143 with a jet pump
Anderson Fueltech.
Aqui é 🇧🇷
O...
Utede' pueden compral un drone de eso que vuelan?
Pa que vean la carrera
When break neck speeds are no longer words...
Wow that seems so dangerous
To bad that ls swapped jet ski with the 80mm turbo wasn’t out there 😂
🔥🔥🔥🚀🚀🚀
Haha that turbo spool lol
❤
all puerto rican and cubans haha
Imagine if the water bike were running consistent over the surface of the water and constantly running until it reached its true maximum velocity!!?
Heck, im sure it could go beyond 140mph.
1400hp? I need to see the dyno figures on that.
I figure at this level same as in car setups, you start reading power off of air density and fuel usage. Doing 60-70 to 140 over 2-4 seconds of unclean acceleration and power loss, 8 plus isn't unfeasible
That’s all well and good but placing figures according to a scientific method on paper is one thing. Placing the engine on a dyno is another. But how it does out in the world environment with all is unknown eccentricities is quite another. Basically how it performs on paper doesn’t perform like you would like it to in the real world. Figured that out with over 30 yrs racing and building competition vehicles of all types. From water sports to salt flats land speed runners. If it has an engine I probably built or tuned it.
@@anthonylove6639 you don't need YT to stroke your ego, you can just talk to your 4 walls next time broken record
It’s not about ego. It’s about facts and experience. That’s it. 🎤🎤
@@anthonylove6639 took ya 30 years to understand dynos aren't for testing power? In another 30 maybe you can say one thing ten more different ways.
I think I would have a steel shroud under me in case it throws a rod ECT 😮
I don’t understand why the 142mph didn’t stand up ??
It ended up being made official at the end of the event, we updated our description with the details. 🤙
It was official after they reviewed the footage and saw that the GPS fell off
The Spanish teams' utter rudeness needs to be addressed and stamped the f out. I won't go to that stuff anymore for the exact reason why that event went to hell. I'm not racist but it's obvious where the problem is. They took an hour to cry about their guy losing the record annnnnd the glass lake disappeared while 10 spanish mouths stood on full throttle because THEIR gps wasn't there to capture the speed. It's so ignorant and annoying and terrible to listen to.
Could you take your kid to that if you could stand what you know often happens at these events??
So, who is going to be the first to do a surface propeller on one of these powermonsters instead of the good ole sucker? At 130mph++ the safety aspect of the jet seems kinda diminishing no? Old video of a GP1300R with propeller drive: ua-cam.com/video/zHdrg3mYSgk/v-deo.html
Those pistons pointed right at your taint has to be scary. But I ride a bike so i guess its not any different.
From Cuba to Miami in 45 minutes .
Fuel tech 🇧🇷🇧🇷🇧🇷
Oye pana oye brother!!! 0:06
Now sea doo do 80 with a prop and lil reflash
The rotax engines are basically aircraft based engines and can take way more boost than k series.
Is it possible to put a straight V drive on a jetski? Look how much faster a V - drive boat is than a jet drive. MUCH faster. I know it would be dangerous from an exposed prop standpoint and you'd have to use some type of aero to keep it from going airborne, but holy 💩 would it be fast!
Why not run a small lake in muskoka Ontario ? Cold air and it’s always calm
So many lakes too. Like about a hundred.
Not sure the Spanish mouth pieces could make it so they can ruin the entire event.
They could pick up 20 mph with 105lb jockey and aero dynamics package.
I wonder if anyone is running a 2 or 3 rotor? It seems like a rotary would be a perfect setup for this.
Except it would be exactly 2x too wide and you don't need that much power. You need a sled that can keep you alive long enough to let your turbo do it's business at 70 pounds of boost on a small 4 cyl engine to fit the jetski.
@Chris_Harris A 2 or 3 rotar is wider, and has more power than a V-8?? The whole point would be to get "as much" power a V-8 but at half the weight and size.. I'm a little confused by your comment tbh
I didn't say it was wider. I was saying a rotary was wider than the inline 4 those Jetski's run and won't fit. The top guy started talking rotary's and I was saying that it wasn't anywhere near viable let alone being able to fit. A rotary isn't going to fit in a Jetski let alone all of the other systems that need to be in place to run a race rotary. The inline 4's are building 1400hp which appears to be about the maximum you SHOULD be building because there is limit to how fast you can go on water with a rider not in a protected cockpit.
As for power, there are plenty of 2400-3000hp rotaries. 110 pounds of boost because the technology is perfect and will support it and you'll make more than most V8s can other than a built V8 race engine. The rotaries often use stock castings to race.
As for the Jetski's, those aren't V8s or even V4 engines in those 1200-1400HP Jetski's. They're straight 4's(so that they can fit) so none of this is has anything to do with the topic.
@@jamesinson3488
At what point is it too much power to be utilized by one jet? You’d think 1400hp would benefit from 2-3 jets putting the power into the water
That's not a jetski. That's a boat.
I'm sure they limit the streams to one, and I really don't think it makes a difference because the fastest jetboats in the world do it on one prop-317MPH.
@@Chris_Harris Maybe a new jetboat with 2 could break that record
That would be connnnnfuuuuusssinng to make happen. Fluid dynamics are not easy because the water you're driving on never has the same density/flatness, so your Jetski technically will never have the same relationship between the input from the jet pump,j et of water/the hull of the Jetski and the water itself.
I don't know if doing a double jet would make that better or worse. It also depends on whether there is some impedance of the water from the one-jet nozzle. Is it even worth adding the complexity of cutting the jet of water into two? You could never fit a second engine in that engine compartment so it would need to support two streams from one engine. I'm going to say that the Jet nozzle must have very little impedance of what power that is produced by the engine to water that the Jetski can physically suck with the jet pump to what it can speed up and push out the back through the jet nozzle.
Sorry, this is a nerdy comment, but in my opinion, those dudes probably have already done the math/testing to see that one stream with high pressure is better than trying to create pressure with two nozzles.@@reeceengineering3560
@@Chris_Harris I was mostly meaning to point out that just because no jet boat team has tried it is not evidence its not beneficial.
With aircraft its always more efficient to move a larger amount of air slower. This is why high-bypass turbofans keep getting larger each year
Efficiency improvment can help for a higher topspeed, depending on what was causing the losses in the "before case". There could be less cavitation on the blades, less losses to mechanical drag by halving the stress put on each unit. Who knows Im just spitballing ideas.
This doesnt need to be done with twin engines. Do the existing setups not already have a gear ratio change between the motor and jet? Run power to a second jet from there. A chain would probably work well.
The level of development it (seems) these teams has reached is well into the land of trying out of the box concepts. Laying up a custom hull with 2 jets could be done, and with photogrammetery they could even replicate an existing hull they are already experienced with.
Trying new things is largely how the drag racing community came so far, and we certianly see these ski-guys using that knowedge...
Ok so if keeping the GPS from falling off is such a concern. Why not put them inside the jetski? I know it's such a radical idea & obviously I'm the first one to think about it. But this way GPS's overboard will become a thing of the past, then shit like this won't happen.
Not as accurate
Sketchy azz crappo
😮
when they broke the first record they were still getting gapped
#fueltecheverywhere
I need one of these after I get F U money
Buh bye old record, congrats well deserved!
hydraulic force dont play no games
1400 hoseepower is just one cars the one tonne is one bombe
I accidentally rented a supercharged jet ski one time in Florida. At 100 mph and damn near 20ft in the air. I shitted myself mid flight.
LOL, they let people rent highly modified skis? All PWC from the factory are limited at 67-68 via coast guard rules.
😂😂😂🤦♂️🤡💯
Some how I highly doubt a rented ski is doing 100mph. Nice story though
@@damianquinn2385 I was going 100 for sure. Once I got the out of the lagoon and hit the first wave. I was ejecto seato cuz.
@@titantitan8750 I rented off fb. It was private owned.
All that aggressive gibberish, I knew it was Florida before they said it.
Oh god, don't get me started.
They ruin every type of racing that involves a small engine.
I've seen those packs of Spanish-speaking people blow up countless races at the organization, then staging, then the race itself, then the result, then the result again, then they whine to the organizers that it wasn't fair. It's rampant in spall engine racing.
I'd hate to have a turbo blow apart OUCH it would tear your ass off
That looks super sketch my guy😂😂.
Wtf turbo and supercharger compound 😮
Jet ski place in FLORIDA no matter how much extra gadgets the laws of physics keep this from being possible whatsoever WITH IMPELLAR system,....YES WITH basically a turbo pump. Now it could do 150-175 mph but got to do the build on it and going to need engine and steering not of the impellor set up. Imagine massive jet blasting pass Cigarette boats for real in Miami Poker Run? Got to think outside this box .
Oye acere que vola? Uva esta escondio se le salio la beta 🤣🤣🤣
How does one dyno a jet ski I wonder🤔
On a Engine Dyno
i thought my 81mph was fast lol
Its the people that don’t believe they make this much power for me😂 they come from the factory with over 350hp, a honda civic easily breaks 1500hp nowadays
They don't understand technology