three years later and you're still helping us people who stand in their yard holding their cameras thinking "how the hell am I gonna do this?!?" Thanks for the GREAT idea! and I'm doing this with the bird feeders outside my kitchen window as well!
Your idea is smart. I admittedly stole your idea as my own to my wife. She thinks I’m a rock star and so clever that she baked my fav cookies. From scratch. Thanks!
Seriously!! I've been pondering this very exact thing for a month now as we are having our house resided with new vinyl. The old eve's were metal, but the new stuff will be vinyl, so this is truly a great idea! So glad I found this video, so thank you!
Jim… absolutely fantastic idea! I have the exact same situation and have been wondering how I could accomplish this without creating more problems. I applaud your creativity and Thank you brotha! This can be done with cameras as well as additional lighting installs without creating weathering issues. Thank you for sharing!
Thank you. Great idea. I used an aluminum strip that was the exact width of the vinyl slats and after painting the aluminum slat, you cannot tell it was just an inserted piece to hold the camera.
The method is brilliant! I used it to hang two outdoor Ring cameras. Easy to put into place and if I ever take it down you'd never know anything was there. Thanks for doing this video.
Thank you for this! I have been struggling to figure out the best way to mount our cameras and your advice is by far the easiest and most sensible way I have found. Off to mount and wire them now :-)
Thank you for the tip. Just mounted a couple cameras following this tip. Works great. Haven't gone as far painting the flat bar to match the soffit yet but not going to worry about that unless the wife starts complaining about it not matching :)
Great idea! Thanks so much for saving me a lot of unnecessary work and aggravation! After watching your video I decided to install Reolink RLC810 bullet cameras on the two front corners of my garage using your method with the 1/8" x 2" aluminum flat stock available at Home Depot. These particular Reolink cameras have 3 separate wires coming out of the camera (a USB connection, a 12v power connection and a camera reset wire with a reset button). It would have been impossible to hide all these wires without using a mounting box. I definitely didn't want an ugly box that would have to be secured to structural wood, because that would have entailed removing the soffit material in order to install wood bracing. Way too much aggravation and work! I didn't want any wires showing, so this is what I did: After measuring and cutting the aluminum to length, I temporarily put it in place. Then I carefully decided where on the aluminum I wanted the camera mounted and marked the aluminum. I then removed the mount and drilled the three small holes to mount the camera (using a template supplied by Reolink). I then drilled a large hole (about 3/4") in the center of those three mounting holes to run the wires from the camera through. After lightly sanding and painting the mount with white spray paint, I again temporarily installed the aluminum mounting bar and marked the soffit for a hole to run the wires through. It was very cold when I did my installation, and the location where I needed to make the hole in the soffit wasn't flat. I didn't want to risk shattering the vinyl soffit with a large drill bit, so I used an oscillating tool with a narrow blade to cut a small square hole in the soffit to run the wires through. Great tool....cut like butter. The aluminum mount covers the hole in the soffit completely. After connecting a POE ethernet cable, all of the wires simply get pushed back up through the holes into the soffit void. The installation came out perfect, and because the cameras are mounted behind a gutter leader pipe, they are barely noticeable. I have no intention of moving or removing the cameras, so I'm not worried about the hole in the soffit material. If I ever needed to remove them, I could just find a scrap piece of soffit, cut out a patch and glue it over the hole. One thing I would suggest to others is that when cutting the aluminum to length, cut it so that it fits good and snug between the wall and the aluminum trim that covers the fascia board. Err on the side of slightly longer....there's always some give, plus you could always use a hand file to trim it a little shorter if necessary. The first one I installed was way too loose, and had to be screwed and caulked to the soffit so the camera didn't shake in the wind. I cut the next one for a tighter fit and it was secure right from the get-go. Also, if you're using wired cameras, make sure you'll be able to snake the wire from your attic to your mounting location before starting your project.
"One thing I would suggest to others is that when cutting the aluminum to length, cut it so that it fits good and snug between the wall and the aluminum trim that covers the fascia board. Err on the side of slightly longer....there's always some give, plus you could always use a hand file to trim it a little shorter if necessary. The first one I installed was way too loose, and had to be screwed and caulked to the soffit so the camera didn't shake in the wind. I cut the next one for a tighter fit and it was secure right from the get-go. Also, if you're using wired cameras, make sure you'll be able to snake the wire from your attic to your mounting location before starting your project." Thumbs Up!!!!!!!!!!!!!
Your idea is pure genius. I installed a camera using your method and it looks great; moreover, I have the flexibility of moving it without doing any damage to my soffit. Thanks for posting.
Thanks for the idea it worked great! I bought a 2 dome/2 bullet 4 camera system and installed the cameras using this idea. Went to Home Depot and bought the aluminum bars which were 2 inches x 3 feet and didn't have any wider. The dome cameras have 4 mounting holes which are wider than the 2 inches wide bar, so I actually cut 2 lengths using a sawzall with all purpose metal blade and then drilled two mounting holes in 1 plate and two mounting holes in the other, effectively making the two pieces one 4 inch wide. Once installed I simply ran the foot of camera tail hidden in the outter soffit edge to where it then goes up into the soffit space to where my ethernet cables were hanging. Luckily I didn't have to drill anything in the attic near the eves because I could see some light bleeding up through the soffit when I was up there, I just had to crawl as far to the corner as I could and then stick the ethernet cables over the 2x4 which then went down and hit the soffit. Don't forget that this idea is to save your soffit, so the camera mounting screws only need to be long enough to go through the mounting hole of the camera and through the aluminum bar but no further otherwise they will scratch your soffit. After drilling the holes slightly smaller than my screws, I then manually screwed in the screws all the way to create threadings in the plate. Once the screws were tight with mounting bracket in place, I then used my sawzall again to saw off the excess of the screws leaving them flush with the top of the plate (screws are now maybe quarter of inch long). For the soffit itself I just had to remove a couple of nails driven up through the outside edge bracket which I could then bend a bit with my hands. The soffit pannels themselves were stapled on and so I couldn't actually remove them, but I was able to pry an opening into the soffit space where the "tongue" of one panel inserted into the "groove" of the other.
Just the idea my husband and I were looking for to install 2 Nest IQ Outdoor cameras without having to drill through the brick exterior. Your video saved us from more countless arguments on the best way to approach our installation! Thanks so much
I did this today thanks to your video. I couldn't remove the soffit so I used a bit to drill a bigger hole in the metal plate and a hole saw to drill through the soffit. Now the wire is completely hidden. Thank you. Note to users: if you use reolink cameras lowes sells 3" wide steel. Home Depot only has 2" and this will not fit your template.
Jim, that's a brilliant idea! I stole your idea and recently installed an Amcrest Turret camera. I even spray painted the aluminum to match the color of my soffit.
This is what I have been looking for. Great idea and video. We have aluminum siding that can dent at the slightest touch and look awful. This will help for sure. 10/10
Good thought on plate cover. My camera was about as wide as the aluminum strip so no need on my part. Just remember to grind screws patruding through so it won't gouge sofit
Jim Odell Hey Jim. First time right now that I’m seeing one of your videos. I clicked like and subscribed. I’ve got a Amcrest security system. Where did you buy those metal stops from, bc where I need to place my cameras, there isn’t a gutter at every station to hide the to a certain point. I could really use your advice here. Thanks so much. -T
Very helpful . I rented a house for almost 10 and was trying to find a way to install a battery wireless camera without damaging the vinyl siding. Awesome idea . Thanks for sharing
Rock and roll brother! I almost took my installation to the next level overthinking it all. Your idea saved me a lot of time and headaches! Thank you sir!
That's a great idea! I really want to try your method but the gutter is on the second floor of the townhome. The cameras are delivered today, so I'm thinking about all different ways to mount it and your video is really helpful. Thank you.
Jim...AWESOME! This is great! I am very familiar with the aluminum strips from HD, I have used them on my boat for various things. For me I want to mount some outdoor speakers but keep them semi protected under the overhang. This is really easy and fast. Can't wait to mount my speakers next week to the soffit of my garage along my brand new brick patio!!
Thumbs up! Elegant solution and watchable video. I'd love to see a part-2 video of your solution on running the wires inside. I'm sure there are other videos out there on how to do that but would love your take on it!
This^^ I love this idea that you showed. However, I have no idea how to get from the soffit to the inside of the attic. Is it just open space between the soffit and the house wall? Should I expect to run into a stucco wall right behind the soffit or is the wall usually less protected than that? This is the part I am most confused by.
Thanks for posting this. I did something similar, I used 2 2" aluminum flat bars, I greatly appreciate this idea as I am trying a few camera positions and it sure beats drilling holes in the soffit panels and then finding out your positioning isn't quite right. I also being a mechanic drilled and tapped holes in the aluminum flats for machine screws (6/32) instead of using self tapping screws with the pointed end sticking out.
Genius. Thank you for sharing I'm in the same predicament I don't want holes in the vinyl or the brick. Thank you so much! God Bless you. New subscriber. 👍
Great video! I have the same trash vinyl soffits that have empty space above them and nothing to screw the cameras into. The aluminum plates will be cheap and easy to put up. Thanks for sharing, will save me a ton of time and money. Now if I only had tips on how to run the wires EASILY. My current plan is to make holes in the soffit AND aluminum plate and push the wire through from the outside. Then crawl around in the attic and use a grabber to get the wire from the really narrow area at the edge of the roof in the attic and pull it through. I have crawled on my belly all the way to that tight area and it's difficult to find the hole to push the wire OUT. It's a pain.
LOVE your idea. I now have 6 mounted that way. Works like a champ. I used screws to mount to the aluminum and counter sunk the heads to not mess up the soffit.
That's a fantastic job I'm going to start working on my cameras at home I have all aluminum siding it makes it hard to mount them anywhere but you have a good idea thanks.👍
This is the perfect solution and met my needs. Thanks for sharing such an innovative idea. It took me less than an hour to install and I’m so happy that I didn’t have to drill any holes into the house.
That's what i need for finish my project. I get a Lorex kit and have'nt found a way to install the last one...well., now i know how to do it right and looks pro. Thanks Sir. Well done.
My rain gutters extend below the soffit by 1.5". I had bought junction boxes before watching your video and had planned on taking them back. I'm going to use them as a standoff as well as cable housing along with your idea of the bar. It will also allow for better control of the camera angle settings due to attaching to a ceiling vs. wall style.
Hi, did you have success installing your Arlo Pro 2 camera like the video suggests? I ask because I'm looking to install one myself and was wondering if the shape of the Arlo camera would hinder the angle when mounted under the soffit like here.
That is really good idea. Thanks for your video. I've been trying to come with an idea to mount some blink cameras that don't require drilling into siding or soffit.
Hey mate, just saying thank you for doing this video/tutorial. I was able to replicate your method and installed a couple of cameras. Was really happy I didn't have to remove the soffit cause quite frankly I couldn't keep them off.
That is extremely smart to use ethat metal piece! EXCELENT. Because its tru it does change the way it is if u screw holes on the original vinyl. A++++ man
Great idea, thanks for this video. Was looking to install some reolink cameras and I have the same vinyl soffit and was trying to think how I was going to block behind them. This is so much simpler. Thanks!
I love this idea. I'm a security integration expert... why did I never think of this. I don't do residential work is why (government/schools)... but for my home... love the idea. I have a hole in my soffit now where cameras are. When I move, the cameras are staying for the next homeowner (covers the hole and "hey we're gonna GIVE YOU the cameras" kinda works too)
I would just like to personally say thanks Jim. I tried this on my install and it made it effortless. 5 cameras up and adjusted in less than 30 min. Prep time took about the same time. Cutting,drilling,mounting camera brackets and paint. Thanks
How did you meet code with your wiring. I'm trying to put my camers up but not sure how to meet code with the wire since you shouldn't have cables running thru attic.
I'm not sure about code since every area would be different. This is all low voltage cat 5 wiring so I'm thinking it wouldn't be as strict, but I would check with your local coding to make sure
Sitting outside must me a nightmare with all them bugs flying around 😂. But thank you for the tip. I didn’t want to drill into the vinyl and this idea seems to be the best trick.
I've watched this video several times. Impressive your workmanship and close attention to detail is rare these day's. Thank you again this is one GREAT VIDEO.
6 years on and still helping peeps. Thanks for sharing your inspiration sir.
I was racking my brain to my wits end getting my cameras up...no way it should have been that much of a hassle...but here we are
three years later and you're still helping us people who stand in their yard holding their cameras thinking "how the hell am I gonna do this?!?" Thanks for the GREAT idea! and I'm doing this with the bird feeders outside my kitchen window as well!
It's all about helping each other. Glad you can use the idea
Same as the poster says. I am about to do this next week and just watched the video last night. Thanks!!
Your idea is smart. I admittedly stole your idea as my own to my wife. She thinks I’m a rock star and so clever that she baked my fav cookies. From scratch. Thanks!
Awesome and eat a couple for me
Mmmmmm cookies.
Funny
OMG! I though I was the only that tells my Wife stuff like this!
I tried using your tact and my wife immediately asked me for the youtube link!
Genius idea. I have been debating how I was going to attach my cameras as I too have the same soffits. Doing this for sure. Thanks for the idea!
Seriously!! I've been pondering this very exact thing for a month now as we are having our house resided with new vinyl. The old eve's were metal, but the new stuff will be vinyl, so this is truly a great idea! So glad I found this video, so thank you!
Jim… absolutely fantastic idea! I have the exact same situation and have been wondering how I could accomplish this without creating more problems. I applaud your creativity and Thank you brotha! This can be done with cameras as well as additional lighting installs without creating weathering issues. Thank you for sharing!
Whoever installed your vinyl siding did a nice job.. Great idea using the aluminum strips as well..
Thank you. Great idea. I used an aluminum strip that was the exact width of the vinyl slats and after painting the aluminum slat, you cannot tell it was just an inserted piece to hold the camera.
The method is brilliant! I used it to hang two outdoor Ring cameras. Easy to put into place and if I ever take it down you'd never know anything was there. Thanks for doing this video.
Thank you for this! I have been struggling to figure out the best way to mount our cameras and your advice is by far the easiest and most sensible way I have found. Off to mount and wire them now :-)
Thank you for the tip. Just mounted a couple cameras following this tip. Works great. Haven't gone as far painting the flat bar to match the soffit yet but not going to worry about that unless the wife starts complaining about it not matching :)
Great idea! Thanks so much for saving me a lot of unnecessary work and aggravation!
After watching your video I decided to install Reolink RLC810 bullet cameras on the two front corners of my garage using your method with the 1/8" x 2" aluminum flat stock available at Home Depot. These particular Reolink cameras have 3 separate wires coming out of the camera (a USB connection, a 12v power connection and a camera reset wire with a reset button). It would have been impossible to hide all these wires without using a mounting box. I definitely didn't want an ugly box that would have to be secured to structural wood, because that would have entailed removing the soffit material in order to install wood bracing. Way too much aggravation and work! I didn't want any wires showing, so this is what I did:
After measuring and cutting the aluminum to length, I temporarily put it in place. Then I carefully decided where on the aluminum I wanted the camera mounted and marked the aluminum. I then removed the mount and drilled the three small holes to mount the camera (using a template supplied by Reolink). I then drilled a large hole (about 3/4") in the center of those three mounting holes to run the wires from the camera through. After lightly sanding and painting the mount with white spray paint, I again temporarily installed the aluminum mounting bar and marked the soffit for a hole to run the wires through. It was very cold when I did my installation, and the location where I needed to make the hole in the soffit wasn't flat. I didn't want to risk shattering the vinyl soffit with a large drill bit, so I used an oscillating tool with a narrow blade to cut a small square hole in the soffit to run the wires through. Great tool....cut like butter. The aluminum mount covers the hole in the soffit completely. After connecting a POE ethernet cable, all of the wires simply get pushed back up through the holes into the soffit void. The installation came out perfect, and because the cameras are mounted behind a gutter leader pipe, they are barely noticeable. I have no intention of moving or removing the cameras, so I'm not worried about the hole in the soffit material. If I ever needed to remove them, I could just find a scrap piece of soffit, cut out a patch and glue it over the hole.
One thing I would suggest to others is that when cutting the aluminum to length, cut it so that it fits good and snug between the wall and the aluminum trim that covers the fascia board. Err on the side of slightly longer....there's always some give, plus you could always use a hand file to trim it a little shorter if necessary. The first one I installed was way too loose, and had to be screwed and caulked to the soffit so the camera didn't shake in the wind. I cut the next one for a tighter fit and it was secure right from the get-go. Also, if you're using wired cameras, make sure you'll be able to snake the wire from your attic to your mounting location before starting your project.
"One thing I would suggest to others is that when cutting the aluminum to length, cut it so that it fits good and snug between the wall and the aluminum trim that covers the fascia board. Err on the side of slightly longer....there's always some give, plus you could always use a hand file to trim it a little shorter if necessary. The first one I installed was way too loose, and had to be screwed and caulked to the soffit so the camera didn't shake in the wind. I cut the next one for a tighter fit and it was secure right from the get-go. Also, if you're using wired cameras, make sure you'll be able to snake the wire from your attic to your mounting location before starting your project."
Thumbs Up!!!!!!!!!!!!!
Great tips! Thank you! Can you give me the specs of the tool you used to cut through your vinyl soffit?
Your idea is pure genius. I installed a camera using your method and it looks great; moreover, I have the flexibility of moving it without doing any damage to my soffit. Thanks for posting.
Good job dude. Simple and straightforward common sense approach.
This is a life saver since I’m renting and can’t drill holes in the house!
That’s totally a pro tip! Thank you very much. I have 8 POE’s to instal this weekend and I have a similar setup
Thanks for the idea it worked great!
I bought a 2 dome/2 bullet 4 camera system and installed the cameras using this idea. Went to Home Depot and bought the aluminum bars which were 2 inches x 3 feet and didn't have any wider. The dome cameras have 4 mounting holes which are wider than the 2 inches wide bar, so I actually cut 2 lengths using a sawzall with all purpose metal blade and then drilled two mounting holes in 1 plate and two mounting holes in the other, effectively making the two pieces one 4 inch wide. Once installed I simply ran the foot of camera tail hidden in the outter soffit edge to where it then goes up into the soffit space to where my ethernet cables were hanging. Luckily I didn't have to drill anything in the attic near the eves because I could see some light bleeding up through the soffit when I was up there, I just had to crawl as far to the corner as I could and then stick the ethernet cables over the 2x4 which then went down and hit the soffit.
Don't forget that this idea is to save your soffit, so the camera mounting screws only need to be long enough to go through the mounting hole of the camera and through the aluminum bar but no further otherwise they will scratch your soffit. After drilling the holes slightly smaller than my screws, I then manually screwed in the screws all the way to create threadings in the plate. Once the screws were tight with mounting bracket in place, I then used my sawzall again to saw off the excess of the screws leaving them flush with the top of the plate (screws are now maybe quarter of inch long). For the soffit itself I just had to remove a couple of nails driven up through the outside edge bracket which I could then bend a bit with my hands. The soffit pannels themselves were stapled on and so I couldn't actually remove them, but I was able to pry an opening into the soffit space where the "tongue" of one panel inserted into the "groove" of the other.
Awesome reply glad I could help with the idea. I used a hand grinder to flatten screws on back of plate so they wouldn't catch or mark up soffit
Hi, can you please share a vid/pics on how to did install. Thanks in advance
AWESOME IDEA! I am getting ready to install PTZ cameras, and this will work GREAT versus cutting holes!
Just the idea my husband and I were looking for to install 2 Nest IQ Outdoor cameras without having to drill through the brick exterior. Your video saved us from more countless arguments on the best way to approach our installation! Thanks so much
Awesome strategy. I have been trying to figure out how to make this happen with siding.Great video.
I did this today thanks to your video. I couldn't remove the soffit so I used a bit to drill a bigger hole in the metal plate and a hole saw to drill through the soffit. Now the wire is completely hidden. Thank you. Note to users: if you use reolink cameras lowes sells 3" wide steel. Home Depot only has 2" and this will not fit your template.
Did you use the iron strips instead of aluminum?
@@mikemuder1693 i think i did. theyre holding up well.
@@ligershark Does it rust?
Jim, thanks for sharing your method. I have been scratching my head for a while and this is brilliant!
Jim, that's a brilliant idea! I stole your idea and recently installed an Amcrest Turret camera. I even spray painted the aluminum to match the color of my soffit.
This is what I have been looking for. Great idea and video. We have aluminum siding that can dent at the slightest touch and look awful. This will help for sure. 10/10
What a great idea! Thanks so much for posting a how-to video of your installation.
Exactly what I needed! Thanks so much!
Great idea, I am facing the same dilemma you were and trying to figure out a way and BAM...you’re video came to the rescue! Thanks again!
You can also you a flat cover for a junction box worked well for my install
Ryan Baker Is the plate wide enough?
Good thought on plate cover. My camera was about as wide as the aluminum strip so no need on my part. Just remember to grind screws patruding through so it won't gouge sofit
Jim Odell Hey Jim. First time right now that I’m seeing one of your videos. I clicked like and subscribed. I’ve got a Amcrest security system. Where did you buy those metal stops from, bc where I need to place my cameras, there isn’t a gutter at every station to hide the to a certain point. I could really use your advice here. Thanks so much. -T
Very helpful . I rented a house for almost 10 and was trying to find a way to install a battery wireless camera without damaging the vinyl siding. Awesome idea . Thanks for sharing
Worked beautifully, thanks Jim!
Thanks for the idea! Best way to mount them that I've seen!
Rock and roll brother! I almost took my installation to the next level overthinking it all. Your idea saved me a lot of time and headaches! Thank you sir!
That's a great idea! I really want to try your method but the gutter is on the second floor of the townhome. The cameras are delivered today, so I'm thinking about all different ways to mount it and your video is really helpful. Thank you.
Nice video, clean and very simple but clever idea.
This idea is pure GENIUS! Thank you!
Jim...AWESOME! This is great! I am very familiar with the aluminum strips from HD, I have used them on my boat for various things.
For me I want to mount some outdoor speakers but keep them semi protected under the overhang. This is really easy and fast.
Can't wait to mount my speakers next week to the soffit of my garage along my brand new brick patio!!
Mike I'm glad you can use the idea. Thanks for the comment
Brilliant Idea, just saw this video, but I'm using this for something else!
What a great idea. I have a block house with a brick facing. I really did not what to mess up the bricks. You solved my dilemma. Thanks from Tampa.
Well done. I'm in the same boat. I really like your idea.
Glad you like the idea and wish you well
Thumbs up! Elegant solution and watchable video. I'd love to see a part-2 video of your solution on running the wires inside. I'm sure there are other videos out there on how to do that but would love your take on it!
This^^ I love this idea that you showed. However, I have no idea how to get from the soffit to the inside of the attic. Is it just open space between the soffit and the house wall? Should I expect to run into a stucco wall right behind the soffit or is the wall usually less protected than that? This is the part I am most confused by.
Thanks for posting this. I did something similar, I used 2 2" aluminum flat bars, I greatly appreciate this idea as I am trying a few camera positions and it sure beats drilling holes in the soffit panels and then finding out your positioning isn't quite right. I also being a mechanic drilled and tapped holes in the aluminum flats for machine screws (6/32) instead of using self tapping screws with the pointed end sticking out.
Just got me past a mental block. Thank you!
great way to do it. Thanks for sharing.
This is absolutely brilliant! I would have had holes all over my house if I didn't find this video!
Thank you so much for this brilliant idea! Exactly what I was looking for!
This is a great idea. I'm on my way to Home Depot now. Thanks!!!
Great idea dude!! Just got a system and found yours searching. Good thinking
This is awesome! I have been searching all over for this solution. Thanks!
Genius. Thank you for sharing I'm in the same predicament I don't want holes in the vinyl or the brick. Thank you so much! God Bless you. New subscriber. 👍
Great video! I have the same trash vinyl soffits that have empty space above them and nothing to screw the cameras into. The aluminum plates will be cheap and easy to put up. Thanks for sharing, will save me a ton of time and money. Now if I only had tips on how to run the wires EASILY. My current plan is to make holes in the soffit AND aluminum plate and push the wire through from the outside. Then crawl around in the attic and use a grabber to get the wire from the really narrow area at the edge of the roof in the attic and pull it through. I have crawled on my belly all the way to that tight area and it's difficult to find the hole to push the wire OUT. It's a pain.
I used this method today to install my Kittyhok cameras after watching your video. Awesome idea!
This was a perfect solution. No need to drag a drill up a ladder to hang the camera. Great video!!
Thank you for putting this out there! Definitely going with this idea
LOVE your idea. I now have 6 mounted that way. Works like a champ. I used screws to mount to the aluminum and counter sunk the heads to not mess up the soffit.
How wide do the strips need to be 2-3 inches?
@@scottb_02 I used 2" strips, just make sure your mount screw holes will fit on the strip. I also painted the strip to match the soffit color.
Brilliant! Never thought about this technique.
Jim, this is a great idea. Thank you.
That's a fantastic job I'm going to start working on my cameras at home I have all aluminum siding it makes it hard to mount them anywhere but you have a good idea thanks.👍
Great idea, you should have more views!
awesome idea!!!! I am so glad to have found your video!
This is the perfect solution and met my needs. Thanks for sharing such an innovative idea. It took me less than an hour to install and I’m so happy that I didn’t have to drill any holes into the house.
Glad it worked for you. Have a great 4th
You too!
Wow this is the greatest idea. I have the same issue. Thanks soooo much for sharing.
Great idea. Thanks for posting!
Great job. I’ve been looking for this exact idea. Thanks
Genius! Will be doing this, this weekend 👌
That's what i need for finish my project. I get a Lorex kit and have'nt found a way to install the last one...well., now i know how to do it right and looks pro. Thanks Sir. Well done.
Great video! Thanks, this will help a lot when my system arrives.
great idea with this installation .Will copy for my installation. Thanks for the tip
Awesome idea that I will use for my camera installation. Thanks for sharing!
Outstanding handy work. Thanks for sharing!
What an awesome idea!! I’m off to get an aluminum strip for this. Thanks a ton!!
My rain gutters extend below the soffit by 1.5". I had bought junction boxes before watching your video and had planned on taking them back. I'm going to use them as a standoff as well as cable housing along with your idea of the bar. It will also allow for better control of the camera angle settings due to attaching to a ceiling vs. wall style.
They do make junction boxes specifically for cameras, would lower them down.
Really nice solution. Good job!!
Smart! I got a security cam system from a friend and everything is labeled and neat. I love creative work and wingin it rather than going by the book
Good idea. Wish I would have thought of this before drilling.
That's a really good idea. Yes, trying to match the soffit if you ever want to take them down isn't easy always.
You are the bomb I'm doing that soon as it warms up I just bought my system today but I'm running mines in the man cave thanks
I was looking for a way to attach one of my Arlo Pro 2 cameras and came across your video... great idea! Thanks!!!
Hi, did you have success installing your Arlo Pro 2 camera like the video suggests? I ask because I'm looking to install one myself and was wondering if the shape of the Arlo camera would hinder the angle when mounted under the soffit like here.
Loved the tips you shared. Excellent explanations.
That is really good idea. Thanks for your video. I've been trying to come with an idea to mount some blink cameras that don't require drilling into siding or soffit.
Jim-------Great idea. I will be doing that at my house for my new cameras. Well done!!
Just did it.......brilliant idea and I can move it too if I don't like the camera angle. Thank you for sharing !!!!
Hey mate, just saying thank you for doing this video/tutorial. I was able to replicate your method and installed a couple of cameras. Was really happy I didn't have to remove the soffit cause quite frankly I couldn't keep them off.
That is extremely smart to use ethat metal piece! EXCELENT. Because its tru it does change the way it is if u screw holes on the original vinyl. A++++ man
This is brilliant! I was going to do a gutter mount but this is so much better
Thank you!
Great idea, thanks for this video. Was looking to install some reolink cameras and I have the same vinyl soffit and was trying to think how I was going to block behind them. This is so much simpler. Thanks!
I tried out some Reolink cameras but didn't like the quality. Have you checked out Hikvision cameras yet? Picked up a 4K camera about about $170.
This video is fantastic. I had no idea of how to mount them. Thank you!!
Great idea and very informative. Thanks.
I love this idea. I'm a security integration expert... why did I never think of this. I don't do residential work is why (government/schools)... but for my home... love the idea. I have a hole in my soffit now where cameras are. When I move, the cameras are staying for the next homeowner (covers the hole and "hey we're gonna GIVE YOU the cameras" kinda works too)
Adam Daley: I hide cameras in bathrooms
Great idea mate , thanks for sharing
Excellent idea and video. Thank you
I would just like to personally say thanks Jim. I tried this on my install and it made it effortless. 5 cameras up and adjusted in less than 30 min. Prep time took about the same time. Cutting,drilling,mounting camera brackets and paint. Thanks
How did you meet code with your wiring. I'm trying to put my camers up but not sure how to meet code with the wire since you shouldn't have cables running thru attic.
Sorry, Should have mentioned I have Arlo Pro wireless cameras.
I'm not sure about code since every area would be different. This is all low voltage cat 5 wiring so I'm thinking it wouldn't be as strict, but I would check with your local coding to make sure
Thanks for taking the time to respond :-).
Did you also drill holes in the soffit or just holes in the aluminum?
Just installed using this method. Worked perfectly. Thanks for the idea.
Very clever idea will use it thanks for sharing.
Awesome idea! I used this and made a video as well and gave you credit in the description with a link back to this video. Thanks for sharing.
Sitting outside must me a nightmare with all them bugs flying around 😂. But thank you for the tip. I didn’t want to drill into the vinyl and this idea seems to be the best trick.
I've watched this video several times. Impressive your workmanship and close attention to detail is rare these day's. Thank you again this is one GREAT VIDEO.
Marie Gabriel John 3:16 : I watched your picture several times too 😉
Thank you! You solved my dilemma. I didn't want to screw into soffit or siding.
Used this for some of my Arlo camera installs. Brilliant!! Thanks
This is exactly what I need! Thanks for sharing this.
great idea, I really love it. Thanks.
Awesome idea. Thanks a ton for sharing!
Hey Jim, thanks for doing this, I made the same thing for my house and they turned out great.
Rick van der Valk; no you didnt