It's really slick. Please note, I have not field tested it yet. I just wanted to share the early product introduction just in case it takes off. We want you guys to take a crack at getting your unit(s) early.
When your radio is in the bag do you ever have any problems with it overheating? What wattage and duty cycle do you use? I have a backpack I want to put my ft857d in but am concerned about lack of airflow...
Never. I talk about this in most of my manpack field videos. It all depends on how you operate. I deliberately carry out targeted contacts with short commo windows (5-15 minutes). I operate in temperatures north of 100F and have never had a problem. Check out a recent video I did called "Anti Field Day 2023". Also, I designed my bag with a rear zipper and snap attachment point i. the event I need to allow air flow. I never use it.
Check out a recent video by KB9VBR on his mod for the FT-891. For my 891, I'm just using a 6" Molex to Anderson Powerpole cable. I think I picked it up from Powerwerx a few years back.
@@TheTechPrepper I have watched Michael's video several times and have gone all in on Anderson connectors. I've been putting them on everything. I just bought my FT-891 so I'll have to wait until my warranty expires before I do that upgrade. I have added Anderson's about 8" from my Molex connectors for now, 73.
You could really add that mount to just about anything, by replacing the M-Lok screws, with what ever screws your situation requires! Ie. Wood screws for a wooden shelf. Metal screws, under the dash of your truck! Its a cool, little, power clip device!
Hi, would you be up for a more detailed video on the antenna connections, types and theory on your armorloq man pack? I just had a discussion with a radio shop engineer who reckoned the concept couldn’t possibly work as there wouldn’t be an earth? I assume he was talking about the ground plane? I didn’t get into an argument as I don’t know enough about it but having seen yours he’s obviously talking rubbish….really interested in building my own but will have to order the frame from the US as it isn’t available in the uk 😟
I don't run a fuse much these days anymore on the manpacks. However, I did build an inline fuse early on in the channel using a pair of automotive ATC/ATO fuse holders. I just attached a set of Anderson Powerpole on either side. It functioned as the patch cable.
This is just a mount. It's up to you to bring your own fuse system. I just used an automotive ATC/ATO fuse holder and crimped on a couple of Anderson Powerpoles to each side. I can't recall which video it was in as that build was a few year back.
RED RIGHT TONGUE TOP viewed from the "hood" side where the connector is flat, with the wires going down, and the mating side of the connector up, then the positive side is on the right. The mnemonic that I use is "red right tongue top". (It leaves out "when the connectors are pointed at you.") That is to say, when the tongues are up, then the red connector is on the right. ✌🏻 I used to have mine backwards too 🇺🇸🙏🏻👍🏻
This is another great innovation for the kit! Thanks for providing the early access.
It's one of the BMAC perks. Thanks for your support as always, Mike.
You're always informative. Thank you.
Happy to help and share the journey as I learn this stuff myself.
Looks like a great addition to your set up!
I'm a sucker for functional and clean. It's a welcomed addition. Have a good one.
Definitely a great idea. Thanks for sharing.
My pleasure. It's nice having a "well-dressed" manpack.
That’s awesome!!
It's really slick. Please note, I have not field tested it yet. I just wanted to share the early product introduction just in case it takes off. We want you guys to take a crack at getting your unit(s) early.
Great product!
Yes, it is!
A nifty idea. I dont need one yet but good to know its out there. ;)
It's the little things... ;-)
I need six more jobs because of you. Keep that shit up. I like it.
Also is the “steb”-by step a typo in the title or did I miss a meaning
It's a typo. I did not notice it until you mentioned it. You're the first to call this out. Thank you.
Happy side job hunting! ;-)
@@TheTechPrepper haha. I’m a paramedic so I’m used to working extra gigs to make ends meet. Haha
When your radio is in the bag do you ever have any problems with it overheating? What wattage and duty cycle do you use? I have a backpack I want to put my ft857d in but am concerned about lack of airflow...
Never. I talk about this in most of my manpack field videos. It all depends on how you operate. I deliberately carry out targeted contacts with short commo windows (5-15 minutes). I operate in temperatures north of 100F and have never had a problem. Check out a recent video I did called "Anti Field Day 2023". Also, I designed my bag with a rear zipper and snap attachment point i. the event I need to allow air flow. I never use it.
I couldn't tell from the video, does your FT-891 have the Anderson Powerpole conversion installed that replaces Yaesu's factory Molex connector?
Check out a recent video by KB9VBR on his mod for the FT-891. For my 891, I'm just using a 6" Molex to Anderson Powerpole cable. I think I picked it up from Powerwerx a few years back.
@@TheTechPrepper I have watched Michael's video several times and have gone all in on Anderson connectors. I've been putting them on everything. I just bought my FT-891 so I'll have to wait until my warranty expires before I do that upgrade. I have added Anderson's about 8" from my Molex connectors for now, 73.
That's slick where can one pick that up?
The link is in the description. I picked up one for each radio. Enjoy.
Did you make that powerpole pigtail? I bought the battery box now all I need is a pigtail
Yes. I make my own Anderson Powerpole cables. If you need a pre manufactured cable, check out Powerwerx.
What bag are you using there? Thanks!
It's a bag that I designed. It's called the TTP Manpack.
Cool
You could really add that mount to just about anything, by replacing the M-Lok screws, with what ever screws your situation requires! Ie. Wood screws for a wooden shelf. Metal screws, under the dash of your truck! Its a cool, little, power clip device!
That's an excellent call out. Thank you. I did not consider that. It looks like I'll be doing an install in the Jeep this weekend with your idea.
Hi, would you be up for a more detailed video on the antenna connections, types and theory on your armorloq man pack? I just had a discussion with a radio shop engineer who reckoned the concept couldn’t possibly work as there wouldn’t be an earth? I assume he was talking about the ground plane? I didn’t get into an argument as I don’t know enough about it but having seen yours he’s obviously talking rubbish….really interested in building my own but will have to order the frame from the US as it isn’t available in the uk 😟
M-Lok, because key-mod is for hippies! 😊
Damn hippies. Although, I am OK with hippies that rock any equipment that can be mounted on 2A gear.
You're not running any kind of a fuse, or did I miss that ?
I don't run a fuse much these days anymore on the manpacks. However, I did build an inline fuse early on in the channel using a pair of automotive ATC/ATO fuse holders. I just attached a set of Anderson Powerpole on either side. It functioned as the patch cable.
Gaston; doesn't the bioennopo battery have a built-in circuit that shutdown the battery when it starts sending more than 12v
KD9WTH 73
Thats awesome. Question, did i miss the in line fuse?
Ill place my orders today.
Another great design😊
Opps I saw it. Thx
This is just a mount. It's up to you to bring your own fuse system. I just used an automotive ATC/ATO fuse holder and crimped on a couple of Anderson Powerpoles to each side. I can't recall which video it was in as that build was a few year back.
I se the one I need TPA-706 is out of stock. I'll call/email and see if they plan to get any more in.
Go give Seth a hard time about his inventory. He's producing as many as he can. There seems to be a small "manpack" revolution. Good luck!
RED RIGHT TONGUE TOP viewed from the "hood" side where the connector is flat, with the wires going down, and the mating side of the connector up, then the positive side is on the right. The mnemonic that I use is "red right tongue top". (It leaves out "when the connectors are pointed at you.") That is to say, when the tongues are up, then the red connector is on the right. ✌🏻 I used to have mine backwards too 🇺🇸🙏🏻👍🏻