Nicely done. Simple. Clear. No extra information. No trying to be funny. Take note: this is the way to make an instructional video. Thank you, very much!
Oh my! I needed to change my vacuum bag at a cleaning job I was at. So since I was given mine as a used gift and no manual....I took the bag out and installed the new one I had with me in a way that seemed ok. The vacuum power head would not turn on though. Ok so I figured I needed to do something different. I took the used bag with me to be conscientious. Good thing as after I threw it away I watched this VIDEO! My bracket is black and the bag color is blue but...the bracket was attached to the bag and your video allowed me the chance to go get it out of the trash before it was too late!!!! Thank you so much for posting this! My Miele is a Capricorn model and the bracket is black but she takes the blue bags.
You make it look easy Mark, and of course it IS -- when you know how!!......Sadly, you have NOT addressed MY problem -- the reason I went looking on UA-cam today, anyway -- which is, HOW do you get the bag OUT without forcing it or without bending the housing of "the chamber"......I can see (how) the plastic collar of the bag clips IN, but how does it UN-clip.....?
I've been having all the dog hair get pulled into the compartment around the bag but not go in for some reason and I can't figure out why. I've pushed the bag in all the way until it clicks and am using the right back (GN).
Hi Newportmeister, It should just pull straight out with a tiny tug. If it is not sliding outfairly easily then you should bring the vacuum in to be looked at by a qualified facility (such as ours) because it should not be hard to do....Good luck and thanks for the question
After my escapade with removing the bracket with the bag which almost went out with trash....I can tell you. Hold the bracket in as you pull the bag out the direction the connection is facing out. Mine faces sideways not upwards unless I tip it on its end.. it requires me to pull kind of sideways if I change the bag with it level on the floor. This may take a tug but hold the bracket in so only the bag comes out.
I've just spent 20 mins wondering why I can't fit a new bag before Googling and finding I did the very same thing. Really bad, flimsy design. Good job I went to get a new bag before the bin got emptied.
Hi Lasuil, thanks for the question. You with the Meile, you have to check periodically by opening it up and inspecting the bag for fullness. The Miele will maintain powerful suction even when full so its a good idea to open it up and feel for fullness. Hope that helps!
Vac Shak folks. Next UA-cam video, explain how much brute force is needed to close the lid. I thought I'd break something when... zoooomp... it f----ng lclosed.
Yep. Me too. Terrible design flaw imo (shame on you Miele engineering) and the plastic hinge is very fragile. I always pray when trying to close. Best to avoid the lid to fully open when replacing the bag
Nicely done. Simple. Clear. No extra information. No trying to be funny. Take note: this is the way to make an instructional video. Thank you, very much!
Nice. Simple and direct. Wish all instructional videos were the same.
Oh my! I needed to change my vacuum bag at a cleaning job I was at. So since I was given mine as a used gift and no manual....I took the bag out and installed the new one I had with me in a way that seemed ok. The vacuum power head would not turn on though. Ok so I figured I needed to do something different. I took the used bag with me to be conscientious. Good thing as after I threw it away I watched this VIDEO! My bracket is black and the bag color is blue but...the bracket was attached to the bag and your video allowed me the chance to go get it out of the trash before it was too late!!!! Thank you so much for posting this! My Miele is a Capricorn model and the bracket is black but she takes the blue bags.
I never want to have anything else than a Miele vacumcleaner ❤️
Thanks so much. I know it was supposed to be easy and intuitive, but my last name may as well be Murphy--this video was a big help.
Great! Thanks. Just bought a Miele and will definitely stop up.
This video is perfect in every way. You've helped me out a great deal -- thank you!!
Thankyou , l can't believe we throw such a solid bag away, l had to check l wasn't missing something.
You make it look easy Mark, and of course it IS -- when you know how!!......Sadly, you have NOT addressed MY problem -- the reason I went looking on UA-cam today, anyway -- which is, HOW do you get the bag OUT without forcing it or without bending the housing of "the chamber"......I can see (how) the plastic collar of the bag clips IN, but how does it UN-clip.....?
I've been having all the dog hair get pulled into the compartment around the bag but not go in for some reason and I can't figure out why. I've pushed the bag in all the way until it clicks and am using the right back (GN).
Hi - what happens if the dust bag connecter comes off with the bag? How do you re-connect it please?
If bag seems stuck then lift up the little blue tag inbetween the 2 arrows and pull out bag , that should release it.
Prob solved
When you close the lid, does the seal for the bag open? I was under the impression that the bag seal stays closed if vacuum is not turned on?
My miele complete c3 bag is changed but I can't lower the top cover to close the bag area. What do I do?
Thank you!
yaaaaaaaaaaaaaaaaasah!!! thank you :)
love
Thanks for the video!
Worst vacuum cleaner I have ever owned, though. I can’t wait until it dies so I can get a normal vacuum cleaner.
Nope , it used to be that simple but now mine get completely stuck and won’t budge - and there’s no damage to any parts , just bizarre
how do you know which bag to choose when you buy the machine does it come with a bag?
How about Hyclean Bags? Is it any good, and will it be compatible with the Complete C3 Brilliant?
My issue is that the bag is really difficult to remove, what's the knack?
Hi Newportmeister, It should just pull straight out with a tiny tug. If it is not sliding outfairly easily then you should bring the vacuum in to be looked at by a qualified facility (such as ours) because it should not be hard to do....Good luck and thanks for the question
After my escapade with removing the bracket with the bag which almost went out with trash....I can tell you. Hold the bracket in as you pull the bag out the direction the connection is facing out. Mine faces sideways not upwards unless I tip it on its end.. it requires me to pull kind of sideways if I change the bag with it level on the floor. This may take a tug but hold the bracket in so only the bag comes out.
I've just spent 20 mins wondering why I can't fit a new bag before Googling and finding I did the very same thing. Really bad, flimsy design. Good job I went to get a new bag before the bin got emptied.
@@romy4593 I also almost threw the bracket out with the rubbish. Glad I realised what was wrong in time, thanks to this video.
How can you tell when a miele bag is full and should be changed?
Hi Lasuil, thanks for the question. You with the Meile, you have to check periodically by opening it up and inspecting the bag for fullness. The Miele will maintain powerful suction even when full so its a good idea to open it up and feel for fullness. Hope that helps!
Mine has a red light that comes on to tell me it's full.
Why won’t the dust go into the bag
Vac Shak folks. Next UA-cam video, explain how much brute force is needed to close the lid. I thought I'd break something when... zoooomp... it f----ng lclosed.
I should have blue in my one but I’ve red one in my one til I can get the blue
My lid won't close
I am having the same problem
Yep. Me too. Terrible design flaw imo (shame on you Miele engineering) and the plastic hinge is very fragile. I always pray when trying to close. Best to avoid the lid to fully open when replacing the bag
Peter Vegt how to close it😭
Filters
You get asked that a lot because it doesn't come with instructions to change the bag!
you didn't say how to remove it come on
E-X-A-C-T-L-Y my point qsb!
slide it out lol