Це відео не доступне.
Перепрошуємо.
Vintage Technics SA 404 Stereo Receiver
Вставка
- Опубліковано 12 сер 2024
- Technics SA-404 FM/AM Stereo Receiver, made in 1979-80. Rated at 50 watts per channel.
This unit has given years of outstanding service, it has a great phone section and would make a great Receiver for some one just getting into 2 channel HiFi. The 404 will easily drive bookshelf speakers up to medium sized floor standing speakers.
NOTE... I was incorrect on the boost frequency's, its as follows...
Low Boost... +6db @ 100hz
High Boost... +6db @ 10.k
I owned this receiver model back in the early 80s. Sounded great and had a lot of power, although it didn't stand the test of time. I think it was the colorful lights that dazzled me the most while it worked. It's greatly missed, but time marches forward and leaves old technologies behind. Your presentation of this receiver brought back wonderful memories - thanks!
its very beautiful device. i don't know why there are no awesome designed audio system like this in 21th century.
Wow, I just found this when bragging about my Technics 50 watt system from college days. I first bought a 40 watt from Dixi Hifi (later merged with Circuit City). But they had a big sale on the SA404 and a 30 day exchange policy so I upgraded. Its big power supply and caps were great for 12" wolfers and rock & roll.... I loved the power indicator in a dark room..... Mine was stolen in the late 80s and replaced with a newer but cheaper sounding unit. I now have Yamaha A/V receiver equipment.
I had a Technics SA-404 receiver in college and a few years after until my apartment was broken into and most of my stereo system stolen. It was a great receiver to drive big 12" woofers for rock music. After stolen I replaced it with a mid 80s Technics receiver. More modern with a digital tuner but it just couldn't drive the music the same. EDIT: I just realized I posted below a year ago...
Thanks for your comment and support " again:) " Cheers my friend.
I had the same one it rocks , I had a 600 watt Kenwood power amplifier, with 8 American acustic speakers hooked to it, I had 10 units as a system.
I've been binge watching Your videos, You have some cool old Radios!
My roommate had one of these in college. Fantastic looking receiver, I really loved the VU/power meters.
I remember seeing these in our local Audio Warehouse in the Cleveland Ohio area back in the late 70's early 80's. I always liked the look of these receivers. It's the lights that got me, I'm simple that way.
Don't remember if I had this exact model but when I was younger I had a Technics receiver just like this one. Remember the individual segmented VU meter. Very classy.
Gorgeous receiver, and thank you for pronouncing Technics correctly!
Oh my gosh, it's 1980.... I'm in the Audio Warehouse store looking at this same exact unit band new sitting with a plethora of other stereo's and amp. I remember the salesman telling me this was not the 'best' stereo to buy. I ended up buying a Nikko. wtf. I wish I would have gone with the Technics SA404! Truth be told I liked all the colored lights on this unit, still do.
I think a lot of "salesmen" were put off by the construction of the cabinet, fake vinyl veneer and Masonite. Kind of cheap I must say.
The guts however do sound very good and all these years later they still work:)
Very beautiful amplituner, nice review!
never seen a technics receiver this nice
Thank you Breaker.
I have the model one up the line, the sa-505 rated at 63 wpc. I feel much the same about mine. I will not sell it. Excellent sound, plenty of power, easy to operate, and built very well. But, yes, this lineup was shallow front to back.
Another excellent receiver that rocks I had was that Phillips 7841 black unit, only 20 watts a side 8 olms, very nice.
Nice video. I have one that I haven't used in over 10 years. Tried to power it up but left channel output intermittent. Will have to open it up and try some contact cleaner. Hopefully it isn't anything more than that.
I too have an SA-404 that a bought with a pair of Tannoy Stratfords and a Dual turntable back in 1980 - haven't heard anything since that beats this combination although the Dual is now gone.
I have a Technics SA-404 since 1980 when I bought new. I seriously believe it has much better sound than the 7.2 Yamaha I bought last year and works perfectly still. Wife want me to get rid of but hate to throw away or give to Goodwill.
Oh dont chuck that 404!
You are correct, that Yamaha is not even as good sounding, how about a compromise. The 404 would make a great garage stereo.
OR.... send it to me :)
no lo vendes
Technics was great but I remember the signal to noise ratio across this series was mediocre. I tested a bunch of receivers back then (1977?) and found that the Marantz line had a very clean sound, but their FM tuner and reception was not as good as Technics. I ended up buying a Pioneer 55 watt receiver but don't remember which model it was.
From memory I do think you are onto something about the tuner on those rigs. I m going to have to A-B them. I may post a video on that. :) Keeping in mind my units are dead stock and NO mods or upgrades. Cheers
hi, what is the loudness control for?, and what about the speakers for it? I am using a pair of onkyo speakers of 6ohms and I can´t turn all the volume control because the sound is too high.
Loudness control usually will boost Bass/Treble at low to mid high volumes, as you turn the volume up the loudness will be lowered. Some receivers act different but overall that is the principal. ( Loudness is for a full punchy sound at low volume with more detailed and comfortable listening experience )
As far as how high you can listen to the stereo is up to you and it is very rare to be able to turn the vol control up all the way without MASSIVE amounts of distortion. Also, the higher you go on the vol control the more amplifier head room you lose, meaning if you need to turn up the vol say past 1/2 way or more the music will sound bad as you are using the last of clean power your amp can produce. These are in laymens terms and I hope this helps.
Cheers
Hermoso video.Muy bien explicado y un hermoso receiver. Una pregunta. Porquè algunos vienen con cobertor en chapa y otros como el del video? Muchas gracias por tu explicaciòn.
Thank you for the kind words. Some models vary, the receivers started using sheet metal towards the very late 70s if i'm not mistaken.. Cheers
@@breakerbroke23 Muchas gracias por tu atenciòn. Hasta el pròximo video.
Maybe a dumb question.. but what are the remote speaker outputs for?
A&B or Main & Remote... B or Remote speaker allows you to add another pair of speakers, either in the same room or another room/patio. If your receiver is hooked up to your TV you could use 4 speakers as a "surround sound" affect. While there are no surround decoding taking place it kind of gives the affect of surround. More than anything B or Remote just lets you add another pair of spks.
EDIT..... No question is dumb. IMHO
you broke it you fix it ...556 north east corner I'm on the side....thats what i use as my DJ amp back in the day..
390 North West Corner, waiving a hand.
@@breakerbroke23 waving 4 fingers and a thumb right back at cha..from me and mine to you and your have a good safe weekend holiday...up there in Prime Minister country..
Im about 70 miles NW of Prime, Take care.
Breakerbroker, would you consider selling your Technics SA 404. I owned one until about 10 years ago and miss it.
I dont want to sell this unit, I use it most every day in my Office..... but they come up on E-Bay often, I have seen them sell anywhere from $40-$100.
Hello.I'm a new subscriber. I just found your channel. I'm most definitely going to hook up Bluetooth to my JVC RX-5060. I've also been researching how to connect my Samsung digital TV - model LN32D403E2DXZA - to said analog JVC. Any suggestions?
Your JVC will let you hook up BT no problem, But the TV, from what I can tell has no audio out puts?.
So that will be a problem. Am I wrong? does that TV have ANY kind of audio put?
Thank you very much for subscribing. BB23
You are correct. It does not have audio in/out. Thank you for responding back. I appreciate it.
Can you plug Bluetooth receiver into the Tape inputs?
Yes, that will work just fine.
Can you hook any speaker up to it?
Do you need a Hub to get sound out?
Wire speakers directly to the receiver.
It's clean with an equaliser and a good set of speakers
Зачёт. Круто.
Thank you.
Hi Breaker, Can you explain how you run the sub on the remote channel. I would like to do that but I am not sure how. Thanks,
Ok... My Cerwin Vega Sub has both RCA and Speaker level inputs. So I use the speaker out from Spkr B (Technics) to the sub. I do that so if I want to listen to music without the sub , I can just turn B spks off. Some Receivers will not let you listen to both Spkr A&B at the same time, if thats the case then just hook up the sub to spkr A along with your Speakers.. (doing that Should not change impedance say from 8 to 4 ohm)
Awesome thanks.
Breaker, Is your Cerwin Vega Sub Powered or Passive?
Powered.. ua-cam.com/video/e-F9FM7ZkTA/v-deo.html
Error 404- receiver not found
I saw one go in ewaste but it had to go to be shredded
Not good:(
looking at one now for 50 bucks
If all modes and functions work, then $50 is a fair price. Enjoy
FIRST
again
This guy knows NOTHING about electronics .hahah ... they weren`t high voltage caps for one , they were high capacity (8200uF 50v) , and 2 they were power amps not power packs ..haha ...
haha you don't know all there is to know about electronics! ua-cam.com/video/LdpX-JJVqnI/v-deo.html
Dude you’re getting into semantics. I’m an HVAC guy and he made sense to me. Caps, amps, resistors, you can give it any spin on the jargon