Thanks so much !! My Procab went unresponsive yesterday when I had visitors !! After watching your youtube, took me all of 5 minutes to fix, now works perfectly !! I used a power screw driver, so took much less time to undo and redo the screws than by hand. Regards, Adrian in Australia
Wondering if you could help. I having issues with my NCE system. When I encounter an accidental short cct the system seems to rest the locos and mess up the sound settings and acceleration systems. I find I need to reset the loco using cv 8. However, it doesn’t always effect every loco on the layout, the most susceptible one are the one with sound chips onboard. Any suggestions would be much appreciated.
have you ever had the system stop listening to controls and it just starts doing what it wants to do? I have changed the battery in the 5 amp system, and it still does it.
Great video, always good to clean the buttons first to test. 1 question slightly off topic, how did you get the loco address to read 003AB? I didn't know you could use letters for the address
Great video. I have a problem with my Gaugemaster prodigy 2 speed dial at the bottom of the controller, it works sometimes so I have resorted to using the Del and Enter buttons to control the speed. Do you do spare parts for my controller or is it possible to clean it?
There could be a number of different reasons, but it is down to the handset not being able to communicate with the command station. However is this issue with a Power Cab or ProCab?
Thanks so much !! My Procab went unresponsive yesterday when I had visitors !! After watching your youtube, took me all of 5 minutes to fix, now works perfectly !!
I used a power screw driver, so took much less time to undo and redo the screws than by hand.
Regards, Adrian in Australia
Thanks for the video. My NCE was looking pretty grubby and some buttons needed a good press. All cleaned and working now. Thanks again. Roger.
Great information and great channel 👍 I think I’m going to try this my screen on my power cab is all squares or boxes and won’t do anything
Great tutorial ! I had some problems recently and thought it was my TTS sound decoder. I'll check my Power Cab out. Thanks for sharing !!!
Very useful information Kevin, thanks for posting. Best regards, Vivian
Wondering if you could help. I having issues with my NCE system. When I encounter an accidental short cct the system seems to rest the locos and mess up the sound settings and acceleration systems. I find I need to reset the loco using cv 8.
However, it doesn’t always effect every loco on the layout, the most susceptible one are the one with sound chips onboard.
Any suggestions would be much appreciated.
Do you know how to turn the back light on in regards to the display? because mine has never worked
have you ever had the system stop listening to controls and it just starts doing what it wants to do? I have changed the battery in the 5 amp system, and it still does it.
Great video, always good to clean the buttons first to test. 1 question slightly off topic, how did you get the loco address to read 003AB? I didn't know you could use letters for the address
Very useful, thank you.
Great video. I have a problem with my Gaugemaster prodigy 2 speed dial at the bottom of the controller, it works sometimes so I have resorted to using the Del and Enter buttons to control the speed. Do you do spare parts for my controller or is it possible to clean it?
thank you for share video
So nce powers up but wont respond
Great do you know what to do if something’s wrong with starting it up and being unable to leave the cab number select screen
There could be a number of different reasons, but it is down to the handset not being able to communicate with the command station.
However is this issue with a Power Cab or ProCab?