Making a Hunting - Utility Knife
Вставка
- Опубліковано 1 жов 2024
- Hey guys, it's been a while since my last youtube video. I have moved to a new workshop and started to make knives as a hobby again. In this video you can see my latest and so far favourite knife. It took me more than a 60 hours to make it. The materials and the size of the knife are listed below.
--- This knife is Sold ---
More knives available in my Etsy store: www.etsy.com/s...
My Facebook Page : / knivesbay
My E-Mail: T.Todorovknives@gmail.com
Steel: RWL-34 Stainless Powder steel, Thickness: 3/16'' - 4.9mm
Hardness: ~ 60-61 HRC
Overall length: 10.8'' - 275 mm.
Blade: 5,3 '' - 135 mm. Saber Grind with false edge on the spine
Finish: Satin
Handle: Steel Guard, Black Cosmic Corian, Turkish Walnut Root, Sculpted handle, Centered pin running all the way through the tang
Sheath: Right Hand Carry , 6 Layers of Leather, each with thickness - 1/8"-3.5 mm,Walnut dyed, Ivory thread
Music used:
Mariusz Goli - Adventure
Acoustic Folk Instrumental - Hyde - Free Instrumentals
Escape' by Sappheiros Chillstep Song
Mariusz Goli - Its time for love
Credits to:
/ @mariuszgoli
My digital music🎶 and physical CD's📀are available here:
First album📀:
mariuszgoli.ba....
Secound album📀:
mariuszgoli.ba....
/ sappheirosmusic
Acoustic/Folk Instrumental by Hyde - Free Instrumentals / davidhydemusic
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
Free Download / Stream: bit.ly/acousti....
Music promoted by Audio Library • Acoustic Folk Instrume...
More knives available in my Etsy store: www.etsy.com/shop/TeodorTodorovKnives
всё хорошо! одно только не понятно зачем этот штырь латунный в хвостовике??? 3:57
Only issue I have is the tang being thin and abit short etc
Wonderful work. I did not know, that RWL34 could be hardened /quenched by air (and not in oil). I must try this the next time. I`ve done that so far only with D2-Steel (1.2379)....
I have a wonderful knife from RWL34 steel-absolutely lovely,in my opinion is RWL34 better than N690. :-)
Beautiful job man 👍🏻
What kind of wood you use for the handle
Thanks, its Turkish walnut root
Really nice job, I love the outcome, the knife and the handle looks fantastic. Just a quick tip I learned from Kyle Royer, always put the strap on the other side fo the blade, that way you aren't riskin cutting into it when drawing your knife and overall the draw gives a better feel. Anyway, good job.
This knife looks amazing!! The craftsmanship of the handle is a work of art!
Thank you!
I really love your work, I would like to ask you a question, how thick is the guard?
.
Wow. Such a beautiful piece. I am in love with the design.
Thank you!
Очень круто, молодец парнишка, такой разносторонний, приятно смотреть за работой профессионала. Лайк и подписка брат, пусть развивается твое искусство! Делай больше охотничьих ножей
Awesome knife! Nice work I love your attention to detail. Thanks for posting your work. 👍🏻
Very nice! Excellent craftmanship
SLAVA UKRAİNE!
LET'S SUPPORT UKRAINE
Amazing work... Love it
Absolutaly beautiful mate
Very beautiful made from skillful man.& thanks for the vlog.!@
Stabilizing your timber first would be good considering all the work you have put in. Well done sir!
Very very nicely done... 😉 😉 😉
Great work! Gave me a little inspiration on my next knife, What was the electro etching process you used with the drill bit? Thanks for your hard work!
Thank you, process is called electrolysis
10:58 razor gaming mouse sticker spotted
Браво, много добре е станал. Респект, мераклиска работа.
Sangat detail pengerjaannya,hasilnya sangat mengagumkan...👍🙏😍😍😍
Браво!
За 60 часа направи повече от колкото някой хора за цял живот!
Did you quit doing knifes?
Nice good work 👌👌👌🙏🙏🙏
ua-cam.com/video/YRAvklNtVmA/v-deo.html 👍👍👍👍👍👍 xorazmda bolgan voqea bu juda zor yoqsa layk bosing yoqmasa 👎👎👎
Beautiful piece of working art
My father made quite a few pipestone peace pipes in his life. He used to melt beeswax and pour it over the wooden shaft then rub it in. I dont know if thats any easier or stronger than just rubbing room temperature beeswax into wood, but thats the way he did it.
When it's hot it's more moveable and can spread deeper. The molecules are moving more. Same way hot water cleans better. The water molecules are moving more so it penetrates deeper into a stain or surface. This rule applies to everything. If the liquid allows itself to be hot it can spead over and fill a pourose area better. That's probably why he heated it, just easier to work with as well.
Gördüğüm en kaliteli bicaklardan biri kusursuz bi usta yapımı
The knife is a remarkable & excellent piece of craftsmanship ! However, the sheath is TOO bulky and thick ( too many layers on the side / surrounding ) to carry....
Well done, knife and sheath..
very nice, thank you. stay safe.
great, thanks for the video. But the music is terrible, lifeless.(:
/
I had to turn it off I had a headache.../
The beauty of that skin
Unbelievable,great looking knife 🔪 how do I get one????
Thanks
Mark
Thanks, you can see my etsy profile or my facebook page and choose the available ones,
www.etsy.com/shop/TeodorTodorovKnives
facebook.com/knivesbay
@@TTodorovKnives how much to price list?
👍👍👍👍
⭐⭐⭐⭐👏👌
Excellent work! 🤜⚡️🤛
Its very beautiful but 60 hours of work eek. You work for $5 an hour? and that doesn't even factor in material costs how can this be at all viable :o
noice
👍👍👍👍👍
Много хубав и качествен нож Т.Тодоров поздравления
Beautiful knife, a real show piece, but not the most easy to use blade shape, the recurve part of the edge is hard to sharpen for the average knife user. The sheet is good looking but too bulky.
That knife is beautiful man. Good work
Oh! My! God! It´s absolutely awesome! :)
сръчност +точност= майстор, браво.
Beautiful !!!!
🙌 Man, that is some excellent work!
Thank you!
That is a super thick sheath. Why did you make it that bulky?
It is a nice knife, but i am curious why didnt you go with a full tang?
You are an artist
Very nice ✌😍🥰
good stuff, enjoyed seeing the leather work
The knive is very beautiful. Just the negative curve on the cutting edge makes it very difficult to sharpen.
Absolutely gorgeous piece brother!!!
I am not following the action. The Plan eludes me.
Absolutely gorgeous! Wonder display of great craftsmanship! Cheers
Thank you!
Great video. 😎
I have done the same thing with the brass insert for the handle pin. Have not seen it used anywhere else. Works very well.
For making the rectangular hole for the tang in the handle block, have you ever tried a handle broach? You can make your own, or grind from a big reciprocating saw blade. I think they are MUCH better/easier to use than filing. They cut on the pull, so no dust getting packed into the hole.
Thank you for filming and posting.
I didn't believe the ste steel is RWL34 and it's rusty haha
I wonder how much a knife that takes 60 hours to make costs
très beau travail
Още на първата минута спрях клипа, абонирах се и продължих да гледам. Браво, страхотна работа!
👍👍👍👍👍 Безупречнова эфекта добивается
Висш пилотаж.
That Turkish Walnut is beautiful wood.
Hai i'm from Indonesia. 🇮🇩
Como se llama el liquido que le aplica en el min 7:23?
Very beautiful knife
12:33 what is that? Water or somthing?
Very well done a true craftsman
A real professional in the art of knife making THANKS
Просто мололдец
Wolkome back pal!
Thank you!
Great to see you back producing beautiful knives.
Thank you Stuart! I hope that you are still using your knife.
@@TTodorovKnives какая сталь.марка
What did you use to finish the handle?
Parabéns, belíssimo trabalho, verdadeira obra de arte.
Хирург
Nice job bro 👏
Good job!!!
Look so cute knife 😻
Z😷🦌🦌
60 hours 😳 great work. What is the price for these knive?
That was incredible
Absolutely Beautiful
Beautiful
Solid work. Love the blade geometry.
👁️👁️
Tell me the price of this knife u made here.
Very good job
Great job
Красавчик хорош нож
amazing work
Great project! Congrats!
Beauty!
Супер!!!!!!!!
No details!
Супер!!
Beautiful....
чему тут все так восторгаются? куску железа выпиленного из пластины?
это не нож...это говно....
🇧🇬
Сказка!!!!!!
Perfect.