We had the same DSS issue with their 1000HP 86 axles. They were so hard to deal with to get it sorted too. A real shame, hope you guys find a good alternative - Taz.
Jason Popovich I would have thought the diff went all screwed since they took it apart earlier that day. But no James just knew exactly the issue. I am blown away
He is super impressive. Didn't James break multiple axles every time he was racing his car there for awhile. He knows well what happens when the axle breaks.
It's more like cleetus is aware of the short attention span of his viewers and the need to keep things moving along, but yeah I would totally watch a james tech segment.
Charles Donley I couldn’t agree more rebuilding diffs requires a visual, hands on, learning experience. You can read about it in a book all day but actually rebuilding one several times is the most important part.
I race circle track cars and we run ford nine inch rear ends when we first started racing when I was 8 we didn't know anything about rebuilding rear ends well me and my dad just did research and it worked out I did my first rear end when I was 11 by myself it's not to bad just make sure you have the mesh and depth set correctly. Lots of videos on UA-cam just watch the video as you do it and just make sure you got it torqued and back lash set correctly if I can do it you can as well brotha
Absolutely loving the everyday vids. I would love to know how hard it’s been and if it could be kept up to all the time. It’s been awesome as i get the notifications in the morning(I’m in Australia). I love watching every aspect of what this channel does. Freedom factory and all the cars. Would be awesome to see everyday videos continue
Man I love you guys and Ruby is by far the best story to watch. The struggles and the hard times and the victories too. Nothing good is ever free and its going to make you work for it but I know you'll do it. Take care guys!!
I thought the exact same thing when I saw Coop in real life. I thought he was about my height 5'-8" haha! What you all don't realize is that there Cleetus boy is a giant....Larger than life itself! Makes a decent sized well grown man look small
It's nice to see the realities of racing actually demonstrated on a UA-cam video. This is how about one out of every 5 track days goes something stupid simple that annoys the living snot out of you and ruins your day. For example my track day last weekend I drove 5 hours to a track just to get there and they did not have C16 so I tried to make a pass on what I had but half way down the track I ran out of gas. Plus me being me I completely forgot to put the track tune in it and I still had a burnout tune so fortunately it was a bit fat and only had 32 degrees of timing not 40.
Finding unleaded race gas even 95+ for a car with o2 sensors has been a huge pain these days. I was in Cail. for winter break and the had 100 at the pump like everywhere I was amazed.
I remember the days when you could make your own 108 octane,but it was sketchy,plenty accurate ,just had to make sure you did not spill the additive on yourself,3 twelve ounce cans of pure mtbe added to 10 gallons of 89 octane unleaded. (methyltertiarybutylether) nasty stuff worse than aniline oil,it's the stuff refineries used to increase octane. Got some on me and had to lay down for a couple hours,head hurt so bad thought I was gonna die,the good old days.
You are all amazing people who work so hard. I really appreciate the entertainment and the information you put into your video. I also have made it my goal to comment for every video this month. I have been on this channel for 2 years and bought a lot of shirts as well as promoting the channel. Love you guys ✊🏻
Ruby is more comfortable to drive around having a body and the auto. I think it's a mix of waiting on parts and ruby just being more driver friendly. I could he wrong tho.
I love seeing footage like this because I don’t know how many times I’ve personally been in a similar situation. I’m rushing to get something together only to have something completely unrelated fail. It can be so frustrating but that’s just part of it I guess haha. Seeing people that do this for a living experience the same stuff makes me feel better about it.
My last trip into harbor freight I bought around a dozen made up of short, deep, 3/8 and 1/4. My wife asked why they were all the same size and looked at me like I was crazy. I think I have two or three left.
I was in the workshop today, none of my sets had 10mm, Turns out all the little fuckers were hiding together in another part of the garage. Found 4 of em!
Instead solid axle is plagued with demolishing driveshaft joints, not that I'm trying to start an argument, just each has their downfalls ua-cam.com/video/k6CnpWOGMFg/v-deo.html
@@kayleb1109 there are NO joints between the powerglide and diff. it is a splined slip together output to input. look at 5:40 in vid. splined input. it's dragster stuff.
@@Fa5Squad Not in drag racing they are not, less moving parts to break and typically much much stronger. I'd like to see a irs take a 1500hp prostock car launch.. Not gonna happen.
I feel like Ruby has been such a gem for so long that she is allowed a few bitxh days now and again. We are all on the forefront of something great from her. I'm not even mad at ol'Ruby. She will get there in her own time. Keep killing it James, Cleet, and Coop.
Convert that thing to either typhoon cvs or have Kennedy build you flanges and run Porsche 935 cvs it takes more power to turn em but it becomes a set and forget deal. Plus you can unbolt the axel without having to pull the ball joint
It legit sounds like the firework stand commercials around 4th of July and new years. I swear every time I hear it I feel like he is about to tell me they got black cats buy 2 get 1 free 🤣 I like this month of freedom
When you’re young you have a good back lol 😂 then you get old and it hurts more so out of that we clean the bench and kick it up there where we can work standing up 👆
I mean if I was at the track for a quick fix Yeah sure we'll send it but come on Cleeter you are at home with axle laying on the table.. take yo ass down to O'Reilly get a clamp
7:32..... sun glass from Miami Vice mated with some Pit Vipers and POOF those were born! I TOTALLY DIG THEM! Coop: " I'm wearing a different shirt every day " Me: "ummmmm shouldn't that be normal " ? lol
Just a day in the life of a field mechanic or heavy tech. Plenty of “put it together just to take it apart” moments in real life wrenching. You get to learn all the nuisances of specific applications of equipment real quick. Being able to quickly diagnose, troubleshoot and adapt is the true measure of a real mechanic. You guys are doing great and these real videos are awesome.
I love seeing this stuff we're normally not seeing. I'm sure it's a pain to film and edit but it's awesome. Been watching since right before Leroy was bought and these videos remind me a lot of those videos
If I were drive shaft shop, I’d be calling you ASAP to make this part right. 100k plus gonna see this and LS cars are like barn cats... y’all don’t need the bad press
Drive shaft shop which I named is a parts supplier for lots of cars including the rear axles on his vette. He specifically mentioned them when talking about it. The local shop that rebuild the diff is completely separate of all of that
Driveshaft shop are absolute trash and their customer service is terrible. High Performance Academy has a video about it. I've heard a lot of people having the same problems with their products and customer service basically telling them to get lost.
i had some DSS axles in my cobalt and they did the same thing. i called up there and they said they wernt welded correctly and sent me a new set free of charge.
8:13 James forgets he's gone metric 😂 James : "There's 2.5-3 inches of pipe coming off of that weld". Cleetus : [opens throttle to check it doesn't hit the pipe]
I just realized, Cleetus McFarland is Joe exotic except with golden retrievers and and turbos instead of tigers and drugs. Also they all are genuinely good people.
James Plotkin yep they might’ve ticked him or James off enough this time that they get the clearance issue with the gforce axles fixed so they no longer have to deal with those ones
No offense but thats a simple mechanics error. The axles are great if you handle them right, you just have to remember that they can get loose when you disassemble anything around it so they could move ¯\_(ツ)_/¯
You could put limiting straps on the suspension to stop it dropping down so far ,And would love to see the Suzuki 4x4 attempt the pond again, Stay safe guys
We had the same DSS issue with their 1000HP 86 axles. They were so hard to deal with to get it sorted too. A real shame, hope you guys find a good alternative - Taz.
James is probably my most favorite person ever
I love that he thought he was being clever by yelling, but that's the only time I've heard the big food is clearly.
he's a national treasure
Thats a strange thing to say. I mean he seems a cool dude n shit but..Youre takin that shit a lil far
Am a subscriber to the James club
For sure but that's just the tech in me
James explaining interesting stuff. Cleetus: "yeah yeah whatever"
Can UA-cam please decide on a spot for comments already
Yeah I'm so confused at this point
“I’d race it like that. I’m definitely about to race it like that.” - Cleetus 2020
LMAO Best quote ever.
With zipties xD
It’s to the point that I think I’ll be more surprised when James can’t do something or doesn’t know about something lol
Glad to see that I’m not the only one impressed by James’ knowledge
I was thinking the same thing.. What i'd do to have just half of his knowledge an experience
Jason Popovich I would have thought the diff went all screwed since they took it apart earlier that day. But no James just knew exactly the issue. I am blown away
He is super impressive. Didn't James break multiple axles every time he was racing his car there for awhile. He knows well what happens when the axle breaks.
Peace maker I thought that might have been cooper in his Cadillac
"Fater or taller?"
"Both!"
my sides are now in orbit
fatter*
@@ogtik892 I'd expect no better grammar on this here page. =P
My sides are split worse than Ruby’s axle
@@laneeric the only place it's worse, is on the Fox news channel
I like that Coop just says random car words when he's behind the camera
Mike Morine Coopers awesome! He always makes me laugh 😆
Cooper really is awesome.
James is loving the "nitrous guy" memes still 😆
Coop's "Shirt of the day" should be a permanent feature of month of freedom
James: "The shafts like to short so it holds the balls at the edge of the cup!" 🤣😂
Sounds like a personal problem! I can't relate!
damn that was a good laugh !
Ruby's being her normal dumpster-fire self.
That’s one fast ass dumpster, I’ll tell you what.
God damn, now I’m imagining an LS engine in a dumpster...
@@jacobrzeszewski6527 and getting faster.
Damn who knew a Corvette and I had so much in common
Well you're half right. It is fire.
All paw drive: t-shirt idea
I would buy 100%
I second this
Paw wheel drive!
A dog tee
4-wheel pawsi
I like seeing the miss ordered parts, makes a guy feel human for ordering the wrong thing.
My wife needs to read this comment. 😐
Chandler Frazier Or ordering the right part but get the wrong one! The story of my life.
The worst is when there are like 20 revisions, and you don't know exactly which revision it is, so you order "the most common" and it's not that.
But, still, they got it fast. LOL
You should find people with nascar trucks and race them at the new track
what Coop said: I"ll wear a different shirt every day for a month
what Coop meant: I'm not going to do laundry for a month.
christopher ridge I don’t think I even own that many shirts lol
@@54raceman alternate 2-3 shirts and game on brother
*Coop (May 25th):* Hey man you got any more shirts? I just need one more shirt, last one I swear! Please man!
Really great to hear cooper back behind the camera, MVP of the cleetus team
James needs his own tech talk segment where he can go full car nerd without cleet blanking out.
It's more like cleetus is aware of the short attention span of his viewers and the need to keep things moving along, but yeah I would totally watch a james tech segment.
That would be perfect for the second channel, If it does well make it a weekly tech talk
yes do a ratchet gopro +tripod without cleetus new series of James tech talk on Cleetus2 chan
Because he's a spoiled rich kid who has no clue. And a total fake that has y'all buying up his merch.
@@davidelam631 why watch then, jesus you boomers are crazy.
I was expecting a "MINT" after putting the zip-ties on the boot.
Zip ties and bias plies would be proud
plhowell1984 zip ties and bias plies, fryburger, and haggard garage. Just to name a few.
We don’t need to be told it’s mint, cuz we know is...
I just want to say the stuff you did with the rear gears was nice to see it would be nice to learn more about that type of stuff
Knowledge is 3/4 the battle. I know its been mentioned a 1000 times James needs a camera.
Charles Donley I couldn’t agree more rebuilding diffs requires a visual, hands on, learning experience. You can read about it in a book all day but actually rebuilding one several times is the most important part.
I race circle track cars and we run ford nine inch rear ends when we first started racing when I was 8 we didn't know anything about rebuilding rear ends well me and my dad just did research and it worked out I did my first rear end when I was 11 by myself it's not to bad just make sure you have the mesh and depth set correctly. Lots of videos on UA-cam just watch the video as you do it and just make sure you got it torqued and back lash set correctly if I can do it you can as well brotha
"All In by the 60ft, nitrous life." Coop throwing shade as usual.
? all i or all 1 . edit more plz
Where is Holley? We need to see her running around the freedom factory!
And taking a poop
Yes!
Yes!!!
Absolutely loving the everyday vids. I would love to know how hard it’s been and if it could be kept up to all the time. It’s been awesome as i get the notifications in the morning(I’m in Australia). I love watching every aspect of what this channel does. Freedom factory and all the cars. Would be awesome to see everyday videos continue
Hell yeah brother
“James has pulled his third member out” - Cleetus 2020
Well either way James should have said, excuse me while I whip this out.
And I thought James just got married last year!
If that allowed on UA-cam
Man I love you guys and Ruby is by far the best story to watch. The struggles and the hard times and the victories too. Nothing good is ever free and its going to make you work for it but I know you'll do it. Take care guys!!
James is a legit car nerd. He's so calm and smart! I would love to geek out with him some day
I thought the exact same thing when I saw Coop in real life. I thought he was about my height 5'-8" haha! What you all don't realize is that there Cleetus boy is a giant....Larger than life itself! Makes a decent sized well grown man look small
Everyone looks small compared to the tuning giraffe 🦒
I'm going to be so sad when the month of freedom is over 😭
It's nice to see the realities of racing actually demonstrated on a UA-cam video. This is how about one out of every 5 track days goes something stupid simple that annoys the living snot out of you and ruins your day. For example my track day last weekend I drove 5 hours to a track just to get there and they did not have C16 so I tried to make a pass on what I had but half way down the track I ran out of gas. Plus me being me I completely forgot to put the track tune in it and I still had a burnout tune so fortunately it was a bit fat and only had 32 degrees of timing not 40.
Ringr 57 And this is why the big boys bring an entire wear house of parts with them. Must be nice right!
Finding unleaded race gas even 95+ for a car with o2 sensors has been a huge pain these days. I was in Cail. for winter break and the had 100 at the pump like everywhere I was amazed.
@@Nathan-gj8ch i just bought 10 gallons of 108 unleaded in az.12.00 a gallon
@@Nathan-gj8ch thats weird im in new hampshire and can only get 110 unleaded nowhere sells leaded race fuel out here
I remember the days when you could make your own 108 octane,but it was sketchy,plenty accurate ,just had to make sure you did not spill the additive on yourself,3 twelve ounce cans of pure mtbe added to 10 gallons of 89 octane unleaded. (methyltertiarybutylether) nasty stuff worse than aniline oil,it's the stuff refineries used to increase octane. Got some on me and had to lay down for a couple hours,head hurt so bad thought I was gonna die,the good old days.
“I mean I’d race it like that, I’m about to race it like that” dead😂
You are all amazing people who work so hard. I really appreciate the entertainment and the information you put into your video. I also have made it my goal to comment for every video this month. I have been on this channel for 2 years and bought a lot of shirts as well as promoting the channel. Love you guys ✊🏻
Why do I have a feeling those zip ties are gonna be on there for a while 😂😂😂😂😂
Eric Williams whenever someone says “ it’s a temporary fix” you know damn well that ain’t a temporary fix
Eric Williams most likely but it might’ve ticked him or james off enough that they get the gforce ones fixed so they have clearance
Those zip ties are gonna for for a six second quarter mile😂
@@fardinm8196 It's a temporary fix at the moment of its creation, but as soon as it's proved to be working it becomes permanent.
Man where has the beast himself been OLE Leroy JENKINS. Need that stickshifting monster back in action
Waiting on parts
What Skyler said and 100% agreed!
Ruby is more comfortable to drive around having a body and the auto. I think it's a mix of waiting on parts and ruby just being more driver friendly. I could he wrong tho.
Hahaha, “I’d race it like that and I’m gonna race it like that.”
I love seeing footage like this because I don’t know how many times I’ve personally been in a similar situation. I’m rushing to get something together only to have something completely unrelated fail. It can be so frustrating but that’s just part of it I guess haha. Seeing people that do this for a living experience the same stuff makes me feel better about it.
"Did you lose your 10mil yet?" - Dude, not even a joke. It's like you may as well buy 20 10mil sockets just to keep a supply on hand
My last trip into harbor freight I bought around a dozen made up of short, deep, 3/8 and 1/4. My wife asked why they were all the same size and looked at me like I was crazy.
I think I have two or three left.
Kyle from boosted boys has an entire drawer of 10 mil sockets lmao
I was in the workshop today, none of my sets had 10mm,
Turns out all the little fuckers were hiding together in another part of the garage. Found 4 of em!
Pretty sure all my 10mm sockets end up lost in the cars I sell, so somebody will find a lovely surprise in them one day
CleetusMcFarland.com has individual 10mm Cleetus sockets for sale.
Am I the only one that has to say "MONTH OF FREEDOM" out-loud during the intro?
I usually just smile ear-to-ear 😂 Ole Cleet cracks me up. Love his content!
My family thinks im crazy, random times of day i yell MONTH OF FREEDOM lol
I'm still on hell ya brotha
every time dude. really completes the experience.
probably
Immediately said "hell's yeah" when he said "but we've got these zip ties..."
Mint
fkin’ mint
You currently have 69 likes good sir
@@MegaAussieFTW I was about to like, then I saw this comment
@@mk-jf1ux Get's it
‘I’d race it like that” tee shirt!
"I'm definitely about to race it like that"
@@andrewdoyle3460 that can go on the back side of the t-shirt
Coop is seems like such a great guy. Always adding some humor and kindness in all situations.
Part of everyday life guys! Really appreciate seeing the hard work behind the spectacular builds
It’s nice that the boys have decided to extend coop’s make a wish indefinitely.
You don't even get to the opening credits and the puppy steals the show :D
Im guessing that's one of jeremy's dogs?
Solid axle never has that problem. I'm just saying.
Instead solid axle is plagued with demolishing driveshaft joints, not that I'm trying to start an argument, just each has their downfalls
ua-cam.com/video/k6CnpWOGMFg/v-deo.html
Solid axles are trash.
@@kayleb1109 there are NO joints between the powerglide and diff. it is a splined slip together output to input. look at 5:40 in vid. splined input. it's dragster stuff.
Your dreaming.. broken axles destroyed seals and bearings broken driveshafts broken ujoints.. I dunno what pipe you are smoking from but..
@@Fa5Squad Not in drag racing they are not, less moving parts to break and typically much much stronger. I'd like to see a irs take a 1500hp prostock car launch.. Not gonna happen.
High Performance Academy has also had issues with "the driveshaft shop" axles.
The drive shaft pop axles
They had the exact same issue, keeps popping out.
I've had to R&R probably 10 of them over the past 5 years on hemis. They duck
Maybe they should stick to doing driveshafts and leave axles to the axle shop
@@sawspitfire422 the driveshafts aren't much better lol
I feel like Ruby has been such a gem for so long that she is allowed a few bitxh days now and again. We are all on the forefront of something great from her. I'm not even mad at ol'Ruby. She will get there in her own time. Keep killing it James, Cleet, and Coop.
Convert that thing to either typhoon cvs or have Kennedy build you flanges and run Porsche 935 cvs it takes more power to turn em but it becomes a set and forget deal. Plus you can unbolt the axel without having to pull the ball joint
Ruby is being: A Typical Redhead... :-)
You misspelled "poor preparation" LOL
Gingers are always let downs.
Dammit I was just sitting down to watch a movie on Netflix and happened to look at email and this just showed up, Sorry Netflix you will have to wait!
When cleetus beeps yo gotta yeet yeet 😂😂😂😂😂😂
what movie i need suggestions lol
@@swapnifty The Platform
@@swapnifty The stand at Paxton County... TBH I have not started it yet, Watching some other videos.... Gonna watch a couple more then watch my movie.
@@toronto543ontario6 Its all good, Its not like we have to wait a week... MONTH OF FREEDOM!
"All paw drive" haha, I'm dead 🤣🤣🤣
Cooper drunk this episode? He’s talking shit to everyone lol
Justin Simpson cooper has always been good at taking shots at people low key or not hahaha
@@CorruptInfinityOfficial Do you think he made up the "nineteenth hole" joke, or was that a set up? Hahahaha
@@pgmurray76 That was straight off the cuff dude. Coop is a savage.
Remember, Cooper got kicked out of Special Forces for LS swapping a Humvee. He gives no fucks.
@@SirVic42 Bullshit
1000 HP Corvette, held together at the axle joint with zip ties. If that doesn't capture the absolute spirit of car culture, I don't know what does :D
I still get chills with the month of freedom intro lol
It legit sounds like the firework stand commercials around 4th of July and new years. I swear every time I hear it I feel like he is about to tell me they got black cats buy 2 get 1 free 🤣 I like this month of freedom
Do you also cry at weddings and during movies?
You might have the flu.
KYDashcam hell yea brother
Get real
"He said it's pretty much new." Only has 500 miles on it.
Hard miles. But at 200 mph, not that many hours.
xD i was thinking the same thing!
I coulda swore I saw chunks missing
If those gears get any taller, Ruby's gonna end up as a tow rig lol. 🚗💨🇺🇲🏁
Could you put limit straps on the rear control arms so the wheels don’t hang so low that the axle slips out?
I said the same. That will eliminate that issue, or go 9" sll the wsy
Yeah solid axel and tub her out is my fix. John doc has the set up for that.
@@charleshowlett1291 NASCAR road race 9" rear axle will enable camber adjustments. Beveled axles etc..
You need to get james an "if its got tits or tires it will give you problems" shirt.
But, what if your tyre has tits? What then?
@@ralliartfanevoix 1980's Pirelli tires had plenty of tits...on their sidewalls - junk back then. (no I was not referencing their exclusive calendar)
Can we just like a video one day of all the doggos just wiggling around being goofy puppies please
Go watch fasterproms channel there is some footage of there dogs/pups at the end of every episode! 😊
Looks like James could use a nice work bench.
When you’re young you have a good back lol 😂 then you get old and it hurts more so out of that we clean the bench and kick it up there where we can work standing up 👆
@Speedrome 40 years ago you'd have found me on the ground a lot. Now that I'm pushing 60, I use the bench a hell of a lot more!
Quickly becoming one of my favorite channels. You have a lot to be proud of Cletus. You and the boys keep up the excellent work.
Cooper rocking the #LSnasty hat!
Love seeing YT channels/teams support each other!
She’ll be a ripper yet again!!! Now we might as well skip the 7s and put her side by side with the Elco.
"a racecar without zipties aint a racecar" aaron unknown youtube channel
holy shit is that the guy working on that fiesta rs turbo? and has a Vectra i think?
@@Dockhead he has a bunch of cars.. but the video when he worked of axles he had this statement about zipties
NEW T-SHIRT: “I’D RACE IT LIKE THAT”
"I'd race it like that" in big letters on the back, and Cleetus doing the Drake meme, with "no" to crimp clamp, and "yes" to zip ties.
thank you to cleetus cooper and james and everyone who has a part in these videos. these videos rock and they keep me going. thankyou for the content
“We don’t have a hose clamp big enough but we do have zip-ties.”
My immediate reaction: 🤦🏼
My immediate reaction 👌
Zipties hold boots on fine
Queue James is a god mechanic*
I mean if I was at the track for a quick fix Yeah sure we'll send it but come on Cleeter you are at home with axle laying on the table.. take yo ass down to O'Reilly get a clamp
@@ACLz28 They do sell metal zip ties as well! I've used them on header wrap.
7:32..... sun glass from Miami Vice mated with some Pit Vipers and POOF those were born!
I TOTALLY DIG THEM!
Coop: " I'm wearing a different shirt every day "
Me: "ummmmm shouldn't that be normal " ? lol
James, you know "Bougie" is french for "Spark Plug" right? Just sayin 😜
@hangtime 7190 yep. Also it's "boujee"
@hangtime 7190 same thing for us
@@quintpieters9606
Knob
@hangtime 7190 stop being lame, i was close enough. Besides, ask any french mechanic what a bougie is, trust me he wont be giving you no candles lol
In Holland we call them bougie
I love the little golden family that’s being formed
Just a day in the life of a field mechanic or heavy tech. Plenty of “put it together just to take it apart” moments in real life wrenching. You get to learn all the nuisances of specific applications of equipment real quick. Being able to quickly diagnose, troubleshoot and adapt is the true measure of a real mechanic. You guys are doing great and these real videos are awesome.
Cleetus us such a down right proper human...kudos to the parents...such an awesome attitude!!!
just got in the bathroom I guess my legs will fall asleep now
no other option brother
Haha I know the feeling brutha. Wait till you stand up. Pins and needles my friend.. pins and needles lol
Crawl off my dude! Don't try to stand with sleepy legs.
17:00 minutest shouldn’t do that to ya. Low circ?
@@RG-tm7uq toilets are made for "average sized people ".... But.... Average people shouldn't even need 5. Sometimes 15 or 16 but never 17
Those "headaches we deal with everyday" is stuff we WANT to see...
DUDE, i just got my girlfriend in to this show and her name is Millie... This blows my mind
She blown me too.
@@mike86mike ;)
Are you calling your gf a 🐕?? 😱
Blew me too
My year and a half year old daughter went crazy for the puppy her name also happens to be Millie
It's so cool to see James with the new tools and putting them to work. Looks like a nice set.
I love seeing this stuff we're normally not seeing. I'm sure it's a pain to film and edit but it's awesome. Been watching since right before Leroy was bought and these videos remind me a lot of those videos
Dog intro was to good.
Aydan Angus Any video with a dog intro is automatically a like from everyone watching.
A dog intro is always the best intro
If I were drive shaft shop, I’d be calling you ASAP to make this part right. 100k plus gonna see this and LS cars are like barn cats... y’all don’t need the bad press
The outside shop only rebuilt the rear diff, they weren't responsible for the axle falling apart at the wheel.
Drive shaft shop which I named is a parts supplier for lots of cars including the rear axles on his vette. He specifically mentioned them when talking about it. The local shop that rebuild the diff is completely separate of all of that
Driveshaft shop are absolute trash and their customer service is terrible. High Performance Academy has a video about it. I've heard a lot of people having the same problems with their products and customer service basically telling them to get lost.
i had some DSS axles in my cobalt and they did the same thing. i called up there and they said they wernt welded correctly and sent me a new set free of charge.
TokinToph He’s prolly aware of that. He was just sharing what they told him about his axles. 🤷🏼♀️
Chloe Hennessey YOU HAVE A BABY BEAR??
@@DaytonaBlueHr is she hot
The coop you look bigger in person comment was hilarious!!! The puppy is adorable!!!
Dirty time for that to occur, the anticipation of seeing her run that 7 was high! 👍
"Coop, you look bigger in real life!"😂😂
“Made me feel better, somebody came by and made fun of coop” 😂😂😂
8:13 James forgets he's gone metric 😂
James : "There's 2.5-3 inches of pipe coming off of that weld".
Cleetus : [opens throttle to check it doesn't hit the pipe]
Ruby’s being a Carole baskin
Ruby killed her husband?
dave S lmao maybe 😂 maybe that’s why we haven’t seen Leroy 😳😳😳
Is it me or does *James* make the videos more entertaining to watch?!
Cleetus, you should live stream, you working on the cars, that would be cool!
0:25 "yeah Ill just casually drive by here no biggie"
‘’All Paw Drive” it broke me
*we've always wanted more behind the scenes KING, keep pushing forward, and may god watch over you KINGS*
I love these behind the scenes videos every day so much cleetus, thank you!!!
Where's the "ForEd" t-shirt?
i love the month of FREEDOM well done clet..
I just realized, Cleetus McFarland is Joe exotic except with golden retrievers and and turbos instead of tigers and drugs. Also they all are genuinely good people.
And the whole meth head polygamist harem deal.
Joe ain’t a good guy
"even jacking the car up and then letting it back down can cause it to pop out" "IN OUR EXPERIENCE!" Garrett's inner lawyer shining through lol
Zip ties are a better fix than the hose clamp idea. Get a pack of the metal zip ties. Those are super handy to keep around.
You can just make out the frustration Cleetus has with these axles. Mebby time for some good ones?
James Plotkin yep they might’ve ticked him or James off enough this time that they get the clearance issue with the gforce axles fixed so they no longer have to deal with those ones
Those are good ones...
No offense but thats a simple mechanics error. The axles are great if you handle them right, you just have to remember that they can get loose when you disassemble anything around it so they could move ¯\_(ツ)_/¯
"A good man knows his limitations." - Dirty Harry.
"A man's got to know his limitations."
@@Borderline5440 This is the correct quote ^^^
@@connoisseuroftigolbitts If you're going to directly quote Dirty Harry with his name next to the quote, at least make it correct.
Last time I was this early America was a free country
TRUTH
You could put limiting straps on the suspension to stop it dropping down so far ,And would love to see the Suzuki 4x4 attempt the pond again, Stay safe guys
I love the all paw drive! Very reliable and guaranteed to make you feel good. 😀