Not going to argue about any part. What I WILL say is that I had a leaking liquid line service valve and I used his 410...and it worked...... No more leak! Can't beat the fix for the price.
Good way to fix it, but the most important things here are not talked about: where do you get the r-ring and steel rings? Without the parts everything talked here is nothing.
This seems like a good idea but really, on those domed valves you can cut the dome off - just above the cap threads then back the slug out and change the ring.
True. You could also cut out the bad valve and braze in a new one. But either way means you'd first need to recover the charge, make the repair, pressure test, evacuate, and recharge. The point here is avoiding all of that.
I have put in a new O ring and a washer before putting back in the snap ring. It did not stop the leak. The pressure is too great on the high side. This is why he did not sell his kits. No short cuts just replace the valve is the way to go.
Al, ask a question, when I finish repair the king valve leaking by replacing a harden o-ring, but not put back snap ring for the easier future repair, you think it is fine ?
Go to: www.seal410.com This guy went through all the trouble and cost obtaining patent protection for his idea but for some reason it's like pulling teeth trying to find a place where you can buy a kit.
Hi, Al thank you for your video for repairing Service Valve leaking problem, by the way where we can order those snap ring and O ring only? Is it kit there or just rings sell themselves..?Thank you for your information regarding this video!
did any one get these kits? any luck with these? i cannot find a single reference anywhere or cannot find where these kits available for purchase!!! not even ebay....why people make videos on such things which are not available
hey Al great video where can I get some of those inserts and Orings, I m assuming we don't have to pump down or recovery all the freon your kind response please
Sorry bout the late reply. My grandson got my computer going. I'm not a good computer fixer. The kits are avabale now. We still have a ways to go in packaging and advertising You can call anytime (EST) 803 491 4565
SEAL 410 Sorry bout the late reply. My grandson got my computer going. Repair kits are available now. Just call me any time (EST) 803 491 4565Thanks Al
No BS. I've had some medical problems. (cured now) and computer problems. We're producing repair kits now- but still building a web site. It's been a long road, please call when you get a chance. 803 491 4565
Not going to argue about any part. What I WILL say is that I had a leaking liquid line service valve and I used his 410...and it worked...... No more leak! Can't beat the fix for the price.
Good way to fix it, but the most important things here are not talked about: where do you get the r-ring and steel rings? Without the parts everything talked here is nothing.
This seems like a good idea but really, on those domed valves you can cut the dome off - just above the cap threads then back the slug out and change the ring.
True. You could also cut out the bad valve and braze in a new one. But either way means you'd first need to recover the charge, make the repair, pressure test, evacuate, and recharge. The point here is avoiding all of that.
I have put in a new O ring and a washer before putting back in the snap ring. It did not stop the leak. The pressure is too great on the high side. This is why he did not sell his kits. No short cuts just replace the valve is the way to go.
Mary if you put a new O ring in the valve you didn't use the SEAL 410. Be very careful removing the plug, what washer did you use? Al
Very smart way to fix the problem ! Best
Excelente y económica solución felicitaciones
Sorry I don't understand the language. Can you help me with English? Thanks Al
He say great work and very economic congratulations
hello from iraq with you well done
I like the video i had suffer from this problem in many AC where i can find it.
What about the Bryant valves with the valve stem sticking up and a slotted collar holding it in instead of a snap ring
A bit of Nylog on the new seal might not hurt, may even help?
That's awesome way to repair those where can I order those parts from? Thanks
Al, ask a question, when I finish repair the king valve leaking by replacing a harden o-ring, but not put back snap ring for the easier future repair, you think it is fine ?
Hi Al, Can you tell how can i get some of that inserts?
Nicely done.
Nicely covered.
Thank you
where can you find the repair kits for these valves
yeah where
Go to: www.seal410.com
This guy went through all the trouble and cost obtaining patent protection for his idea but for some reason it's like pulling teeth trying to find a place where you can buy a kit.
Larry Nel
Hi, Al thank you for your video for repairing Service Valve leaking problem, by the way where we can order those snap ring and O ring only? Is it kit there or just rings sell themselves..?Thank you for your information regarding this video!
I'm having trouble with you tube . I do sell the kits. Call me at 803 491 4565
did any one get these kits? any luck with these? i cannot find a single reference anywhere or cannot find where these kits available for purchase!!! not even ebay....why people make videos on such things which are not available
How expensive are these valves? Is it worth it to rebuild king valves?
Very few home owners are going to remove a king valve from their compressor.
hey Al great video where can I get some of those inserts and Orings, I m assuming we don't have to pump down or recovery all the freon your kind response please
Hi Gene We now have most of the kits ready. Sorry bout the late reply. My grand son got my computer going. You can call any time (EST) 803 491 4565
Hi al where can I buy service valve seal inserts
looking interesting !
Where do you get the repair parts for those valves and what are their names?
Elliot Ehrich
Sorry bout the late reply. My grandson got my computer going. I'm not a good computer fixer. The kits are avabale now. We still have a ways to go in packaging and advertising You can call anytime (EST) 803 491 4565
Where can I get these kits
great work were can i order those kits
SEAL 410 Sorry bout the late reply. My grandson got my computer going. Repair kits are available now. Just call me any time (EST) 803 491 4565Thanks Al
nice, but where you get these parts and part number?
Sorry bout the late reply.Most Seal 410 kits are available now and a edited web page is coming. Call anytime (EST) 803 491 4565
Why dont you respond where we can get these, you do a great video but nobody can find these kits ?????????????????
Sorry bout the late reply. My grandson got this computer going. Most kits are available now. Call me anytime (EST)803 491 4565Thanks Al
i got the kit from harbor freight
@@ctm1170 link please, would really appreciate it!
@@ctm1170 what you use for retainer on dome valve
DId anyone ever find out where to source these?
Use PayPal, log on with send payment al@seal410.com put good 3/4 or 7/8 dome style the note section $12.50
Hey Al,if your going to post a video can you at least answer some questions,or is it just BS
No BS. I've had some medical problems. (cured now) and computer problems. We're producing repair kits now- but still building a web site. It's been a long road, please call when you get a chance. 803 491 4565