"Ranch Hand" Peterbilt 389 Installs - New Gen Air Ride Steer Axle Kit - EP 1
Вставка
- Опубліковано 19 сер 2024
- Alrighty folks, in today's episode, we are installing a New Gen Air Ride Steer Axle Kit onto the "Ranch Hand" Peterbilt 389. So join the Boyz of the Chrome Shop Mafia as they remove the factory air ride and give this truck a much lower profile.
Check out the link below to buy yours today!
12 Gauge Customs New Gen Steer Axle Air Ride Kit For Peterbilt 389 - www.4statetruc...
This will be a must on the new 589 to make it look like a nice looking truck. The front end is way UP in the air with a large gap in the fender to tire area.
Thanks this was a great video installing the air ride system !! Very good detailed on this video !!!!
Been waiting on this series going to be killer 👍🏻
I got this air ride kit on my 2022 389 and I love it
Can't wait to see this build
A sweet new truck, all that work with half assed switches
So all in all that kit makes it looka little better, when it' parked.
I bought a 12 guage single bag conversion kit for a W900. I wish you guys would not sell that! Its a death trap & a POS!!
good jab 🤩👍
The height difference not being adressed is killing me slowly. Spacers should’ve been added to the leaf springs to even it out
Nice ride
Now Brian drive it through some gravel again. Lol
Do they make this kit for a 2015 Freightliner Cascadia?
Unfortunately no, only for a 389, 379 and W900.
@@TheChromeShopMafiacost 2007 379
Other than a lower ride height, are there any benefits that make this kit better than factory? Better ride quality? Adjustable ride height/air bag pressure? Overinflate for clearance?
No, Its objective is to slam the front end down on the ground
@@TheChromeShopMafiaOK, thank you. I have a 2019 567 with the factory air ride steer axle. It seems to be overly bumpy. Looking for a way to improve it. Thank you for your reply!
Watch the old show on your fixing up the trucks
This video makes it seem like this job takes way more money and effort than it's worth ❓
Is the install any different with non air ride 389 from factory
Did you guys have problem with the bag rubbing on the coolant pipe on passenger side? I’m have that issue when the bag is expanding hitting bumps
No, we did not have any problem.
I am wondering if 2 1/2 inches of travel is enough. Am I missing something?
2.5 is what you want.
do you make one for a 2005 379 and if so cost
Twelve Gauge Makes it! Gen III Steer Axle Air Ride Kit For Peterbilt 379 2007-Older
$2,439.99 Part#01-050901
www.4statetrucks.com/gen-iii-steer-axle-air-ride-kit-01-050901
installed 3 gen air ride 12 ga. front working good. back gets filled up and does not get down. any suggestion. i am not sure i have problem with rear axle over inflate. i dont know whats going on
Is it possible to put a air ride kit on a 20,000 lbs Steer Axle
As long as it has factory air ride I would think so.
What’s that orange hose under the fuel water separator
Good morning,
It is the electric cord to the heating element in the fuel water separator
Do they make a front air ride kit for a 83 359?
Good afteroon,
If you would give us a call, tel:888-875-7787 we can get you with a Parts Pro to see if we can get you the information you need.
Ever need to change air bag have to take off bracket and get new u bolts
Did u guys installed on car hauler axle. Or on regular 3 inch axle .
Axle looks like wide trac. I’d go on a limb and say that’s car hauler axle
Do you have a hanger part number for this?
Good morning! It is a kit 01-0509126.
Do those bags have a built in bump stop?
If you send your contact information we can get to a parts pro.
If you would private message us on Facebook we can get you a parts pro
What model and part number to order please
Good morning, if you would give us a call we can get you with a Parts Pro to see what options we would have for you. Thank you!
A new $250,000+ 2024 Pete, adding a $2300 air ride kit...... installed using channel lock pliers, washers for spacers and cheap AutoZone plastic switches?? 🤔.
Gr8 Vid!!!!!!!
DIGITAL DASH.. 🤢🤮🤢🤮🤮
Does this kit require fuel pump grinding to clear air bag on the Cummins motors ?
No it does not.
@@TheChromeShopMafia thank you! Awesome video.
It’s ride HEIGHT, Bossman, not ride heigth !
Will there be issues with the driveshaft with a lower front end?
For this install, typically not.
However, we find some trucks are a lil’ more sensitive than others.
So, for optimum results, it may be beneficial to adjust rear susp ride height just a tad, OR, modify driveline angle ever-so-slightly.
These new trucks are crap. I am driving a 2023 389 peterbilt. The dash is crap. It has to be reset all the time.
The cheesy leveling rod is no bueno !! should use s.s. all thread with s.s. heim joints.They will never brake..