I think its just a matter of time, I'm surprised the number and variety of that HF has released in the 20v line, they have a 7 1/4 miter saw already, so not much of a leap from there to a bench saw - thanks for subscribing!
question? When charging this specific tool is the battery indicator supposed to light up and flash while charging? Just curious cuz when i plug mine in there's no lights. Really enjoy your reviews. Your to the point. Subbed your channel
there is a collet nut that must be loosened to release pressure on the collett and the bits will come out, if the collett does no expand, you might have to pull on the bit a little to get it out - if you are having problems, take the collett nut completly off and remove the bit and the collett nut and then remove the collect from the bit, there is a button on the end of the tool to lock the motore, once the motor is locked, you can turn the collett nut to remove it - thanks for subscribing!
I like your videos! You certainly make life a little easier. One question about a video I Sean on harbor freight about a 3” bench grinder the collars that you found on line do you have the information where I could find them. Thanks
I got those from aliexpress.com - there are a bunch of sellers on that site, and what they sell and who sells it changes all the time, search that site for 'Mini Drill Brass Collet Chuck For Dremel Rotary Tool ' and there are a lot of sellers, and there is a 11 piece set for $3, you will find a wide range of prices for the same part depending on who is sell them - thanks for subscribing!
I had faith in this thing but it stopped working after 2 weeks I had the warranty so I got a brand new one I’m giving it another chance let’s see how long this one last
I thought that was kinda odd they were not easily replaceable, but if they start having problems, I take about the tool and replace them, I keep a few on hand for project - thanks for subscribing!
@@snapwholeharborfreightreviews yes same here tip get a genuine not the knock off i-maxB6 battery charger is sweet get one you can even charg to lower voltages to add gobbs more battery life but knock off will not do that trick sadly i got a knock off till i order a new one it will charge lead acid li-ion li po nickel metal were everything really to 4or 5 cell in a balance or just by the 2 wires non balanced
about 2 hours, but I rarely charge it and watch it, I typically plug it in and set a time for 2.5 hours to shut off the charging automatically, I'm very cautious to not overcharge, overcharging will shorten its life, but it can take a lot of abuse before it shows - thanks for subscribing!
I was thinking about getting one of those Bauer cordless rotary tools. I was looking at them about a month ago when they were on sale. I have an AC powered model, but it's nice to have a cordless model for convenience. The price is not bad when it's on sale. Only thing I didn't like, they don't sell extra batteries for it.
that is one cheap wrench, but it is what most of these tools come with, the open end wrench would be a little easier to handle - thanks for subscribing!
Bauer is really stepping up the game in cordless-ness.
Waiting for a cordless small contractor table saw!
I think its just a matter of time, I'm surprised the number and variety of that HF has released in the 20v line, they have a 7 1/4 miter saw already, so not much of a leap from there to a bench saw - thanks for subscribing!
I have the Chicago Electric one and I love that thing. Like you said you can find many things that it would be helpful to use it for.
I'm liking this one, I have several corded versions, nice to have a cordless
question? When charging this specific tool is the battery indicator supposed to light up and flash while charging? Just curious cuz when i plug mine in there's no lights. Really enjoy your reviews. Your to the point. Subbed your channel
Hey so what ended up happening with it? Was it dead or was it just not showing it was charging? I’m having the same issue
@@hexbug101 I ended up returning it. It wasn't charging at all. The new one I got works fine. It's a decent tool.
@@garyalensr same model? Or did you find a better one?
Nice looking tool and another great review. I can see why you like the size. Thanks!
Thanks for the positive feedback!
Thank you for reviewing this. I’ve actually been thinking about get this to replace my corded version.
I am very happy with this one, I was concerned about the battery but is worked out great for me - thanks for subscribing!
i stil cannot figure out how to change the inserts its mind blowing
there is a collet nut that must be loosened to release pressure on the collett and the bits will come out, if the collett does no expand, you might have to pull on the bit a little to get it out - if you are having problems, take the collett nut completly off and remove the bit and the collett nut and then remove the collect from the bit, there is a button on the end of the tool to lock the motore, once the motor is locked, you can turn the collett nut to remove it - thanks for subscribing!
You have to hold the lock button down to loosen the end off.
I like your videos! You certainly make life a little easier. One question about a video I Sean on harbor freight about a 3” bench grinder the collars that you found on line do you have the information where I could find them. Thanks
Thanks for reply ?
replies are posted when I have the time to spend reviewing the comments - thanks fro subscribing!
I got those from aliexpress.com - there are a bunch of sellers on that site, and what they sell and who sells it changes all the time, search that site for 'Mini Drill Brass Collet Chuck For Dremel Rotary Tool ' and there are a lot of sellers, and there is a 11 piece set for $3, you will find a wide range of prices for the same part depending on who is sell them - thanks for subscribing!
Thank you for replying and the information .
Thank you ! In under few seconds i got it without playing video with your into pic.. but i let a little bit play ads and gave a 👍
thanks for subscribing!
He cuts off video to show how he put the round cutting disk on? I can't figure it out?
try this video - ua-cam.com/video/xGJW5kP2eIU/v-deo.html - thanks for subscribing!
I had faith in this thing but it stopped working after 2 weeks I had the warranty so I got a brand new one I’m giving it another chance let’s see how long this one last
hopefully you just got a bad one, I've used mine quite a bit and not had trouble and really like it - thanks for subscribing !
what grips me is the 18650 batters do not come out goofy stuff
I thought that was kinda odd they were not easily replaceable, but if they start having problems, I take about the tool and replace them, I keep a few on hand for project - thanks for subscribing!
@@snapwholeharborfreightreviews yes same here tip get a genuine not the knock off i-maxB6 battery charger is sweet get one you can even charg to lower voltages to add gobbs more battery life but knock off will not do that trick sadly i got a knock off till i order a new one it will charge lead acid li-ion li po nickel metal were everything really to 4or 5 cell in a balance or just by the 2 wires non balanced
But how long does it take to recharge it from a low to dead battery stand point?
about 2 hours, but I rarely charge it and watch it, I typically plug it in and set a time for 2.5 hours to shut off the charging automatically, I'm very cautious to not overcharge, overcharging will shorten its life, but it can take a lot of abuse before it shows - thanks for subscribing!
Will be back!
glad you like it enough to want to come back -thanks for subscribing!
I was thinking about getting one of those Bauer cordless rotary tools. I was looking at them about a month ago when they were on sale. I have an AC powered model, but it's nice to have a cordless model for convenience. The price is not bad when it's on sale. Only thing I didn't like, they don't sell extra batteries for it.
the batteries is not easily removable - you would have to take the tool apart to swap batteries - thanks for subscribing!
Battery is internal non removal.
I use one of the Pittsburgh ⅜" open end wrench on the chuck. Works much better than the thin wrench included.
that is one cheap wrench, but it is what most of these tools come with, the open end wrench would be a little easier to handle - thanks for subscribing!