Have you had any issues running the stock lower control arms in the rear? About to order a set of coilovers and I’ve seen some people say without adjustable rear LCAs they see uneven tire wear and too much camber in the rear?
Nice install. I'm gonna be doing this shortly. You should update us if / when you get an alignment . . Are you planning on doing adjustable lower control arms, toe arms, or the roll correction kit from whiteline?
just had my coilovers installed at the shop today. i noticed my ride height on the front right side of the car is a little higher than the left.....is it because its not settled yet? or do they have to be perfectly even? thanks
I know you had a Mazdaspeed 3 but you should pick up another one and properly mod it like you did the ST. Especially now that you have all the support.
is it a bad thing that im modding a 2010 toyota matrix (automatic 1.8 4 cyl. engine :'( ??? ksport coilovers, muffler and resonator delete, custom straight pipe addition. i want to get a diablo body kit and some wheels too..??? any tips??
I have a daily driven ‘16 wrx. I’m looking for some comfy coilovers, and these look pretty affordable. Do you think rolling the rear fenders is necessary in order to prevent tire rubbing?
Honestly in first bit I would of kept Jack there while you impacted it to reduce stress you might of cross threaded or shaved off some due to weight stress. Same with your wheels, at least wiggle them and go in spec form tightening sequence, I've seen people just throw there wheels up and use impact and then wheels come off because it shaved off a bunch of it on lugs. Sorry I just like to see you safe.
"IDK what this sensor is here but we're gonna remove it" lol -every car guy
Damn bro you’ve been grinding!!! I remember u had like 2k subs with that mazdaspeed 3! just found the channel again, unreal man!
Few months later now, how do you like the coilovers? I'm debating on a few diff ones and these are on my list. Thanks in advance !!
The sensor on the rear control arm is a leveling sensor for headlights
Have you had any issues running the stock lower control arms in the rear? About to order a set of coilovers and I’ve seen some people say without adjustable rear LCAs they see uneven tire wear and too much camber in the rear?
“I like to drive this car... uh rather... not slow” lol! Me too man. Me too
whats the size of your tires and rims
Very cool video. I recently did my shocks and struts on my Prius, and when that bolt on your strut was giving you problems, it triggered my PTSD
no way.... first yt ive ever seen that runs no adds
I just put a set of k sports on my corrado and so far I love them!
You have shown me everything I need to know to work on my own subi you’re a life savvveeerrrrr
Do you still have them ? What’s the review as of now. I have a 600hp c63.
Dude my son would go nuts over that coloring book lol he loves riding in my sti. Love your channel my dude
new cam upload? love to see it! really nice quality video and very informative
Nice install. I'm gonna be doing this shortly.
You should update us if / when you get an alignment . .
Are you planning on doing adjustable lower control arms, toe arms, or the roll correction kit from whiteline?
Do you live in colorado ? because I saw a car that looked just like this one.
just had my coilovers installed at the shop today. i noticed my ride height on the front right side of the car is a little higher than the left.....is it because its not settled yet? or do they have to be perfectly even? thanks
How did you fit a jackstand next to the floor jack like that? I can never get my jackstand to fit on the pinch weld when I jack up my 2020 sti
What are the full tire size?
What color is this car?? Is that a factory color?
I know you had a Mazdaspeed 3 but you should pick up another one and properly mod it like you did the ST. Especially now that you have all the support.
do they not fit a 2020 sti? i think i saw they only fit 18 down
Hey. Im thinking of going with the same coils how are they after a while
I miss videos on the VA.
I just installed some coilovers last week I’m curious if you have any torque specs for top hats? I just tightened everything with a breaker bar.
That Mustang looks sick.
I’m picking these up tomorrow in Mesa for my A4, I appreciate the tips!
Perfect timing for this video cuz imma have my firstborn in October and can’t wait to cop those books
That’s so funny... this whole time, keeping up on your channel, I could have sworn you had Coilovers already 😂 righton Cam
What jack stands are you using i tried to put my jack and jack stands on the pinch welds but my jackstands wont fit
Different question. what program do you use to edit your videos
is it a bad thing that im modding a 2010 toyota matrix (automatic 1.8 4 cyl. engine :'( ???
ksport coilovers, muffler and resonator delete, custom straight pipe addition. i want to get a diablo body kit and some wheels too..??? any tips??
In the market for some coilovers just a quick question on spring rates, what do you recommend ? I’ve got a 2020 Subaru sti..
Love your content bro ! Keep it up , one of the few who can make a professional install video make sense
Yes i love your video pls nissan 350 z test
Neiko breaker bar is the best one in my opinion, got it on amazon for $22
I ran into the same problem with the fronts on my sti also. I ended up having to screw the bottom bolt out rather than using the mallet
Didn't include how to get to the tophats of the rear coils
Any updates on the Ksports?
What ksport model are those ,control pro,sport ,gt
you should build a mk6 gti next!!
Tucson in the house
You recommend these for the 350z? Ive seen your old install video and was curious to see how you've liked them
Love them! Drifted so good😍
@@CameronAlford Lesgo okay gonna have to give them a try 👌😤
I have a daily driven ‘16 wrx. I’m looking for some comfy coilovers, and these look pretty affordable. Do you think rolling the rear fenders is necessary in order to prevent tire rubbing?
Entirely depends on your wheel fitment, height settings, and camber goal
Great video! Looks great with the new coilovers. Thanks bro! STI love
Love this channel man 🙏
Should take professional pictures of the subie for wallpapers
Honestly in first bit I would of kept Jack there while you impacted it to reduce stress you might of cross threaded or shaved off some due to weight stress. Same with your wheels, at least wiggle them and go in spec form tightening sequence, I've seen people just throw there wheels up and use impact and then wheels come off because it shaved off a bunch of it on lugs. Sorry I just like to see you safe.
Does anyone know if you need lower control arms when going on coilovers
you do not. But to get a proper alignment or a certain angle or camber you need them
Yo when does merch ship?
Did you order a restock item?
Cameron Alford I don’t believe so. Two CS tees, 2 CS stickers, turn for rumble, and silver jet tag
Cool! Thanks for sharing.
if you use an open hand wrench to guide the fastener out while your backing it out with the impact its a lot easier!
You have a Tomei titanium exhaust, but can't afford a proper impact. It's a life saver, get one!
Geez/ What happened to the floor? I thought you said it was heavy duty and rugged. Looks like cheap Epoxy.
I have a question men, you have never had problems with your car
Noti squad
ahh first comment but i need a tutural for a 350z one tho plz
tutorial*
I did ksport install on the 350z already yo! Go find it on the channel
Nice
Hello...
Yessirskii
i didnt get a tee shirt....WTF Ksport !!!!
Bro looks like he could be related to Mac Miller
Slam it
Third
Does anybody else agree that the channel was better with the 350z??
HUITEMAUS GAMING no