You do realize you can CHANGE THE SPEED of the print while swapping filament, right? Set it to 10% speed and you don't have to work so hard to keep up with it. Just a thought.
10:10 Never seen a more lazy way of changing filament. No settings in the gcode, nothing needs to be stopped. Just push a new roll of filament and you're good to go. Ingenius!
I am planning on attempting something similar. I have a character that I made up I call "Tudaus". I am hoping to print out a life size statue of him. He stands 7 and a half feet tall, so I guess it will end up a little bit bigger than the statue of shaq. I am currently printing a life size model of his head. I have my fingers crossed that it will turn out right.
I don't know if you know luban 3d software, it super nice to cut big object into parts based on the printing volume of your printer, I'm actually using it right now to cut a big 1200mm tall model , it also add dowel connector for easy assembling and aligning
Also your consistent freeze might be absolute positioning on the E axis - switch to relative E and it might not crash, if it's crashing due to an overflow.
Almost need a power bank battery sponsor for backup power? If your power flickering is what is causing the freezes, that is. A printer that size needs to run longer than that... Power loss recovery filling up the SD card? Turn that off or maybe a faster larger card would help? Best luck figuring it out!
Have you updated the firmware? I haven´t seen this issues of the giga frozen and not passing certain height on others videos of this printer or the facebook group... can it be power related?
The video was ok, but the music was completely out of touch. Like when you assemble all the pieces you put a song that sounds like you're a hero going through some hard training and transforming in a movie
I am so sorry for the monster I created.
That being said - RAAHHHH LIFE SIZE SHAQ PRINT 🗣🗣🗣🗣🗣
Was a fun and challenging project!
@@3DPrinterAcademy Can you print him a hat?
@@ducko8342an excessively smol hat
@@michaelgplayzza blue egg Smol hat
Amazing quality printing ... destroyed with the iron
WOW that is super cool. Thank you for spending all that work just to show us this!
Microplastics…yummers , and that’s why you should always have good ventilation and/or a respirator
I farted in my grandmas respirator
Should paint it now
It's made for trash
Been waiting from the start
Same, now I can unfollow and continue with my life
Im bummed this video didnt get the attention it deserves but you got a new subscriber out of me from it! Way to follow through!
You updated his number on the jersey, but it's still 36 on his shorts lmao
hold on now, thread boards has to be the best sponsors product i've seen. Looks really useful!
Damn this is impressive. I just 3d printed myself in like 2 ft and it was already a lot of printing. Life size shaq is just insane …
You do realize you can CHANGE THE SPEED of the print while swapping filament, right? Set it to 10% speed and you don't have to work so hard to keep up with it. Just a thought.
Haha 😂
Try making a gearbox that goes by itself without a motor and it has to be strong enough to withstand the speed cause i want it to go god speed!!!
10:10 Never seen a more lazy way of changing filament. No settings in the gcode, nothing needs to be stopped. Just push a new roll of filament and you're good to go. Ingenius!
I was waiting for this one! That required some dedication
This is the most intense benchy I've ever seen
Why is Shaq's head orange again ?
When you first posted about this I was convinced it was a April Fools day joke.
Now paint HIM!!!!
I'm here to boost the algorithm
Yessss i’ve been waiting for this
I am planning on attempting something similar. I have a character that I made up I call "Tudaus". I am hoping to print out a life size statue of him. He stands 7 and a half feet tall, so I guess it will end up a little bit bigger than the statue of shaq. I am currently printing a life size model of his head. I have my fingers crossed that it will turn out right.
You should have talked with Gloop. Better welding, and doesn’t mar the appearance of the print.
I don't know if you know luban 3d software, it super nice to cut big object into parts based on the printing volume of your printer, I'm actually using it right now to cut a big 1200mm tall model
, it also add dowel connector for easy assembling and aligning
You could use 3kg filament spools. Less filament changes.
now, print a live sized caseoh 💀💀💀
impossible
e sun should send 10 tons of filament
@@SkyKyYen10 tons to print his toenail.
Ain't enough plastic
it ain’t enough print in the world
Now sand it and paint it photorealistic!
Also your consistent freeze might be absolute positioning on the E axis - switch to relative E and it might not crash, if it's crashing due to an overflow.
Nice can't wait till this gets to the great Pacific garbage patch
pussymistic*
It most likely won’t
Make a new how fast gear box vid but try using chains instead. Like how bicycle chains work.
Now paint him
Yes
Wow, thats huge!
make another video named :painting life sized Shaq💖
Almost need a power bank battery sponsor for backup power? If your power flickering is what is causing the freezes, that is. A printer that size needs to run longer than that...
Power loss recovery filling up the SD card? Turn that off or maybe a faster larger card would help?
Best luck figuring it out!
I'm also in Newport
well done!
IDK IF THIS WOULD WORK BUT FOR WELDING TRY DROPS OF MEK sry for caps
If anyone can do it you can make it go god speed
Had to come here from insta
When will you paint it
Have you updated the firmware? I haven´t seen this issues of the giga frozen and not passing certain height on others videos of this printer or the facebook group... can it be power related?
Am i the only one who saw that the pants are the celtics one and the torso is the lakers one ?
Did you ever fix that big printer working correctly?
Very cool.
How many grams of filament in total?
10k
40kg
I guess “Shaq” is a famous person in some regions of the world? 🤔
2:51 he shows his license plate
Your 3D model probably has a higher free throw percentage...
The first stop looked like it ran out of filament. and in the same spot. There was no filament about the extruder in the video.
Im here because of insta bro
now get real shaq next to it
please get someone capeable to paint it!
0.8mm nozzle?
Now post process and paint it lol
Whats the height
7 foot 1 probably 🤔
You need to get an NBA real leather basketball and paint it that's cool s***
What about the wheel
It must look so bad in person.
Btw there is a 36 on his leg
Nice print but the colors are orange again:))))
I think I hate 3D printing now, thank you
Yeah, hard to argue against that
Pls paint him to ıt’s own colours
Help mans out
Sup
Why does ıt write 36 in his shorts
so wait how tall are you?
6’
Most awkward video I seen in a while lol idk how u almost got 500k
This video deserves a dislike for all the wasted resources.
We must stop that consumerism idea "a person who consumes a lot is a good person"
Bro I watch your videos regularly bt I have one idea to share you it might be helpful to you if have then reply me I'll share you
I love this
sorry, but thats somebody else :)))
0 views in 0 seconds,bro fell off
595 views in 1 hour,bro fell off
4k in 9hrs
you expect people to get anything in even a single second, especially a relatively small creator like him?
@@usvmchc2843 relax sweetie, it's a joke.
@@hellogoodbye3129real
probably would have been much easier to cut it up smaller and print it all on bambu printers
he did
The video was ok, but the music was completely out of touch. Like when you assemble all the pieces you put a song that sounds like you're a hero going through some hard training and transforming in a movie
14 views in 3 minutes. bro fell off
Even with all the issues I still want one 😆
I want a thread board but don’t have a printer can you make me one @3dprinteracademy
I want a thread board but don’t have a printer can you make me one @3dprintacademy