Out of all 2 strokes ive had, the blaster is the hardest to put back on a pipe getting the damn hole lined up haha great video guys! 2k cannot believe it man great tutorial blasters are just so easy to do a top end on! Can't wait for the next video. Soon you will be celebrating 3k you just wait!
there is no way that you only have 2.81 subs! i never looked at your sub count and i thought you were a big youtuber. Your vids are well put together and fun to watch. Big things are coming and i know it bro.
Im about to do this to my brother's blaster plus some. Guy before used rtf and it plugged the ports. Gotta rebuild entire top end and get a new crank/crank bearing
Hey do you know where to get a 2004 blaster stator that is 4 wire ? Or are they 5 wires . I have got 2 that don't work . Any links on where to get one from buffduckracing ?
I bought a 66mm Wiseco piston for my blaster and it is too small by .5 but my cylinder head still reads 66mm so a stock bore piston should fit right. So idk what I did Wrong
I have a question I have a blaster that’s not cranking .. rewirted everything need reeds cleaned the carbs and new sparks plug but it’s still not cranking ... the comp. test says 119 is that good comp. or do I need to do my top in also
119 is a little low but it should definitely run like that. 150 is where you should be at. I would make sure everything is clean, make sure you have spark and fresh gas. Keep me updated🤟🏽🦆
@@buffduckracing7721 i used valvoline 10w 30 full synthetic oil. I did some research and a few people said synthetic oil bad for the clutch. Is that true ? I rode the blaster for two days straight with it. I just got it running because it had a blow top end. I put in a wiseco piston and she rides like a beast but I’m worried about the engine oil I put in her :(
@@buffduckracing7721 guess what happened today so I was starting my Yamaha blaster and I pull the choke out so it starts hitting the rev limiter until I popped it into gear ⚙️ even the kill switch would not work now I’m scared 😱 to ride it what should I do?
Congratulations man! You won the Benchmade mini-griptilian! If possible please dm me on Instagram “@buffduckracing” so I can get your shipping information. 💪🏽🦆
I have an 88 blaster myself and these videos are a blast to watch!
Thank so much dude!!
@@buffduckracing7721 This video was a great help
Haha get it? Blast, like blaster
Out of all 2 strokes ive had, the blaster is the hardest to put back on a pipe getting the damn hole lined up haha great video guys! 2k cannot believe it man great tutorial blasters are just so easy to do a top end on! Can't wait for the next video. Soon you will be celebrating 3k you just wait!
Haha yes they are! Thanks so much dude! Love the support!🦆
there is no way that you only have 2.81 subs! i never looked at your sub count and i thought you were a big youtuber. Your vids are well put together and fun to watch. Big things are coming and i know it bro.
Thanks so much man! That means a ton! Much more to come💪🏽🦆
Great timing! Out I’m my shed right now with position in hand!
Hahah😂. Glad to help!
Im about to do this to my brother's blaster plus some. Guy before used rtf and it plugged the ports. Gotta rebuild entire top end and get a new crank/crank bearing
Dang dude! Have fun! They are so cool
@@buffduckracing7721 it rode nice the 2 hours it ran lol
I hope you respond do you need gasket maker for a top end rebuild
I do not need any. Thank you though!! My top end rebuild went well
First time thanks for the advice and the video bro👊🦌
Just bought a blaster.. it's old and beat up but it rips... I want to learn how to rebuild it and make it run & look sexy. Thanks for the videos
That’s awesome dude!!
@@buffduckracing7721 do u glue the gasket on or just let it sit
Congrats on 2k
Thanks man!
I just bought some a soil dominator the other day and it made my blaster so mush more snappy than maxima super m oil.
Dang!!! That’s awesome, might have to try that!
Is there a trick to putting the wrist pin clips in I can’t get it?
What brand was the cylinder head/jug you used thank you! Was it a eBay head if so I’m going to order one I didn’t know if they are good or not
Where did you get the new head and cylinder
Don't have a blaster but just picked up a Warrior 👏🏿👏🏿
Nice man! Those are sick!
Do u have to glue the gasket down with sealant
Hey do you know where to get a 2004 blaster stator that is 4 wire ? Or are they 5 wires . I have got 2 that don't work . Any links on where to get one from buffduckracing ?
Ooooo. I’m not too sure on that. It can be hard to find parts but I have gotten a lot of mine from e bay
@@buffduckracing7721what top end kit did you use ?
I bought a 66mm Wiseco piston for my blaster and it is too small by .5 but my cylinder head still reads 66mm so a stock bore piston should fit right. So idk what I did Wrong
Blaster is looking clean
Thank ya!
If there is a large gap would it rattle?
No, it just won’t have good compression making it lack power.
do you have oem or chinA CARB THERE?
It’s a China carb but she runs pretty solid!
Blaster thanks for all the love and support!
lets goo. Thanks Ed!! 🦆
I have a question I have a blaster that’s not cranking .. rewirted everything need reeds cleaned the carbs and new sparks plug but it’s still not cranking ... the comp. test says 119 is that good comp. or do I need to do my top in also
119 is a little low but it should definitely run like that. 150 is where you should be at. I would make sure everything is clean, make sure you have spark and fresh gas. Keep me updated🤟🏽🦆
Thats really low the book says 140-160 psi.
It was the top end … I blew it up again tho
What type of engine oil you use for your blaster ?
yamalube 10w-40
@@buffduckracing7721 i used valvoline 10w 30 full synthetic oil. I did some research and a few people said synthetic oil bad for the clutch. Is that true ? I rode the blaster for two days straight with it. I just got it running because it had a blow top end. I put in a wiseco piston and she rides like a beast but I’m worried about the engine oil I put in her :(
Hi your a under rated UA-camr and really cool
Thanks man! The means a lot!
My blaster is finally running
Sick dude!
Same I got mine running 2 days ago
Love you man your vids are lit
Thanks dude!
Blaster content love it .. keep sending her 💫💫💫 just got with my blaster.. wish I could ride with you
Sweet dude! I’d love to do a quad meet sometime!
Man i love that 88 and how well you keep er in good shape. Recent sub, been catching up on your Blaster vids. Excellent content
Thanks man!! I Appreciate the feedback and follow! 🦆
What motor oil did you guys use?
Yamalube 10w-40
@@buffduckracing7721 2 stroke right?
Hey, love your video buddy good luck on your UA-cam journey
Thanks so much man!!
Hey 👋 buffduck Ive been pondering 🤔 if you can just compress air into the cylinder will that make a differenceor make it worse I’ve seen people do it
Hmmm. I have never personally done it before
@@buffduckracing7721 guess what happened today so I was starting my Yamaha blaster and I pull the choke out so it starts hitting the rev limiter until I popped it into gear ⚙️ even the kill switch would not work now I’m scared 😱 to ride it what should I do?
How often do you replace the top end of a blaster?
Whenever the compression is low and it’s hard to start
i love your videos on the blaster
Planning on buying a blaster soon
Sweet!!!!
Gobble gobble
i have a 93 yamaha blaster and its awesome
That’s sweet dude!!
Let's gooo! Ya did it🦆
Yes!!!!
Yep my four wheelers queefing now I need new rings
Great info..👍 is that an eBay cheap carb
thank you! Its not the stock carb but I'm not too sure where exactly it came from, Its world really good though
good job on getting a Wesco never get china pistons
About to do mine soon, nice job
Thanks man! Have fun!
How did you do your heat cycle?
U DA GOAT FOR THIS ☝️
I’m giving the give away a shot. Congrats on the deer too!
Thanks man!! You’re in!
I’m getting a 2001 blaster next weekend.
No way!! Sick dude!
@@buffduckracing7721 thanks man
Can't really see it moving but definitely can hear it smacking the wall.
11:41 we are gonna torque those down a grunt and a half bruh I’m dyin 😭😭
Great video
Thanks dude!
Benchmade is where it's at fr. Quality and worth the price they cost!
Definitely dude! Love them!
Love watching your videos
Thank you!!🦆
I want that knife lol cheers to 2k
Thanks dude!! Entered!
Getting ready to show my 13yr old how to put in a new top end in his Blaster. He would like the knife 😁
Haha. Sweet dude!! You’re entered!
Congratulations man! You won the Benchmade mini-griptilian! If possible please dm me on Instagram “@buffduckracing” so I can get your shipping information. 💪🏽🦆
Need to be dropping link to the parts you get or use
Love the blaster
you completely forgot talk about put the studs on the new cylinder, other wise good vid
I’m rebuilding the top end to my blaster as well
Sweet man!!
Good vid I need to do a top end on my 03 blaster
Thanks man!
Just did a top end rebuild on my ktm 150
Sweet dude!! Those bike are so cool
I really enjoy the Blaster content!!!
Thanks man!!
Sick video.
Thanks man!
I frikin love my blaster.
Haha. Sick man!
Great video guys!
Thanks man!!! 🦆
Nice blaster
Thanks dude!
Remove the carb remove the exhaust remove the coil wire and the 4 cylinder base bolts... boom. Pull the top end out as an assembly.
Thanks for the knowledge!
No problem man!
Those griptilians are so reliable I was told
Yes! They are super nice!
hell yeah buff duck on tik tok go now
Thank you for recording
I gotta do this on the weekend to mine (im13)
Awesome dude!!! Have fun 🦆
i love that blaster!
Let’s gooooo
Bro i need you to help me get mines goin frfr
You got this man!💪🏽🦆
Bro I'm trying to get my UA-cam going i have account already man just subscribe for me
You guys forgot to do the leak down test , it' probably got a air leak.
Hmmmm. I did not do that. She runs pretty solid right now though!🦆
I've never done a leak down test on my 97 or 03 blasters when rebuilding top end and no issues I only do it if rebuild bottom end or split cases
I'm about to get a blaster to race
Love the videos man
Sick dude!!
I just fixed my blaster to
Nice man!
Love the videos
Thanks dude!🤟🏽🦆
I just finished a top end rebuiltnon my blaster
Sweet!!
Big fan from tik tok
No way!! Thanks man!
My new rings look a little to loose
I love blasters
Me too🦆
We need some videos on the 125 and kx100 (entering giveaway)
Yessssss. Soon soon. Entered!
heck yeah buddy buff duck on tik tok
Keep the work up
Will do man! Thank
Can you tell me what’s rong buff duck
I’m not too sure. It’s could be a few things. I’ve never really seen a 2 stroke backfire though
Congrats
Thanks dude!
Tacos and pizza are good
Oh yesss
Cool stuff
Thanks dude!
Just did mine!
Awesome dude!
Tomorrows project for me
Nice dude! Have fun!
That knife looks like it came from the dollar store!
Yo I’ve been here since day one so I think I should get a knife. And I’ve shouted you guys out on insta.😂
Haha. You’re entered to the giveaway!
We should race blasters
Yesssss
Hi u r the best
Thanks duden
Good it needed it
Haha. Yeah dude!
🐐
🦆
Yo if I could get that knife that would be sick
Entered!
But it’s backfiring
Hmmmm
I need that knife !!
Entered!
Nobody bothered to check ring gap?
U shuda upgrade to a big bore kit
Haha. I though about that!
I'm rebuilding a Yamaha blaster top end lol
Sick dude!