On the later 4840's they used tapered bearings and eliminated the snap rings. My neighbor had a noise in his PTO and split the tractor to find the idler gear had spun in the housing. He had by brother ni rod the housing and he die grinded it free hand to get it tight again. In the later models they used a deflector to get some oil up on that gear to eleminate the problem. He used the tractor on a pull type chopper though wich probably was harder on it.
@@Hinesfarm-IndianaTheres a thread on new ag talk with a guy talking about. Evidently there's an update kit to switch the output shaft over. The idler gear the guy sleeved and pinned the housing but it takes a lot of hard pto use for the idler to become a problem by the sounds of it
Heard the IH guys drive the front of tractor into the ditch leaving the rear sticking in the air so they don't have to drain all the hydraulic oil when they change PTO seal.
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
White 150 with same grain cart works well here
Hydro state on m2 still working well
Thanks for the show
Thanks for watching
Still sum 36 inch row corn here in Lincoln/login Nebraska county
Yeah we run 38 inch
On the later 4840's they used tapered bearings and eliminated the snap rings. My neighbor had a noise in his PTO and split the tractor to find the idler gear had spun in the housing. He had by brother ni rod the housing and he die grinded it free hand to get it tight again. In the later models they used a deflector to get some oil up on that gear to eleminate the problem. He used the tractor on a pull type chopper though wich probably was harder on it.
@@mrbill4187 thanks for watching. Yeah this winter we’re gonna have a guy look at it, yeah this is a late 78.
@@Hinesfarm-IndianaTheres a thread on new ag talk with a guy talking about. Evidently there's an update kit to switch the output shaft over. The idler gear the guy sleeved and pinned the housing but it takes a lot of hard pto use for the idler to become a problem by the sounds of it
@ ok yeah our mechanic talked about that update, we also have a 1982, never had trouble with it.
Who says we need tracks on grain carts😂😂
Dont think my n6 Sunnybrook combine eats corn like yours tho
My own bank account 😂
I remember ur dad sending us out to hook weeds in a couple of those fields on that side of the road lol
@@tnhillbilly1307 oh yeah we use to cut a lot of weeds out of the fields lol 😆
@@tnhillbilly1307 do ya want to hook weeds again lol 😆?
@@Hinesfarm-Indiana I'm not quite as nimble as I was back then 😆
@ marching around the fields is what will keep a feller in shape lol 😆
@@Hinesfarm-Indiana 😆😆😆
Heard the IH guys drive the front of tractor into the ditch leaving the rear sticking in the air so they don't have to drain all the hydraulic oil when they change PTO seal.
@@duanekabanuk3974 I guess that’s one way to do it lol 😆. Thanks for watching.
Eight row out
Oh yeah
👍☕☕
@@blacklisterd thanks for watching.
Hello everyone and welcome back to Hines farms and watch out for flying drones
@@michaelmarion7161 thanks for watching. Oh yeah gotta keep an eye out for them lol 😆
Do you run all wide rows?
@@johnmacomber377 yeah we run 38s on corn, and 15 inch on beans.
If im not in jail im farming 😅😅