Brother MFC-J7630, MFC-J6530, J6930, J6530 & MFC-J6920 Printhead Purge
Вставка
- Опубліковано 21 лип 2018
- This is for when the usual printhead clean just does not work. It's possible this will work on other printers. Press and hold the Home button, press and hold the 4th blank field. Press *,2,8,6,4 then 7,6,3 when the maintenance notice comes up. Follow the rest of the video to see how to purge. Sometimes you have to do 7 or 8 of these. If after the test print shows a bad result then repeat 7,6,3 onwards. Look at the comments, some people have put in comments about other printers too!
This worked FLAWLESSLY on my J6920DW. Unbelievable how many printhead cleaning cycles I did to no avail.... After ONE power purge the troubles colour had every single inkjet functioning perfectly.
Tried Brother online support without success. Chatted with support rep, without success except for suggestion to send printer in. Talked with local tech repair - either they didn't work on printers or their base charge was $100 to look at it. Did a google search and found this video. My printer is now working great! Until seeing the new printouts, I had not realized that the print quality had been gradually degrading for awhile. I have a MFC-J6920 that is only 4 years old. THANK YOU! Will try to post this link on Brother's support page.
Brother MFC J6710 DW
You are a true champion in my eyes. This worked perfectly and no need to buy stupid cleaning solutions as mentioned in other UA-cam videos. Thank you so much for this video!!!
After doing the procedure five times for the black cartridge, it worked! Thanks for saving my company from buying a new printer.
You're a legend!!!! Air blockage and Cyan ink blockage.... Major.... Fixed with this with 3 or 4 cycles of the Cyan.... FIXed!!! Thank you.
This worked on my 6920 printer. After 763 hit Mono Start. After the cycle is over hit 763 again, then Mono Start again. After you have run a few cycles of this hit 99 to get back to the Home screen and run a test print. Had to do 763--Mono Start 6 times before black was cleaned fully. Thanks for a great tip!
Thanks a lot, worth to mention that my pritner is model MFC-J6930DW and works just as shown in the video.
Wonderful! Black wasn't working at all even with new ink and pumping the tube inlet with some cleaner. Ran this procedure three times and now black working fine again! Thank you
Wow!!! Brother wanted to charge me over £100 to service my printer and this worked on the third time with Magenta. Thank you so much
Thanks alot . It works in my J6930DW. Honestly it's magic. WOW! Thanks for sharing this info
Thank you so much! You just saved me from throwing away a printer which suddenly refused to print black. The info from your video did the trick, after running the mono cycle 5 times on the MFC-J6920DW, everything declogged and my printouts are fine again! Note that when I selected black before "Mono Start" it felt like a much shorter cycle and did not improve much. But when I went directly for "Mono Start" after 7,6,3 it worked better...
Worked an absolute treat on my MFC-J6920DW 😀Thank you so much
Same here bud, can confirm it works on the MFC-J5335DW also. Was genuinely stuck when the head cleaning wouldn't clear it. This solved the issue, much appreciated :)
Wow, i thought I had to buy special fluid and do acrobatics with my printer in a last ditch effort to salvage it. Then I found this video. I can't believe it. I'm like sharionreis5374 like the previous post and was stuck at the same problem for the same model. Other than the fact that it runs on ink, the printer is well designed. It prints fast and scans big. I just wish ink doesn't dry, clog or do all these things that give consumers grief. A million thanks!
thank you so much Sir, it worked on my Brother MFC-J6530DW.... I was honestly was losing my head....... thank you so much!!!
YOU are absolutely amazing! This totally fixed my issue!
You are the BOMB!! Thanks to you, I am sooooo thrilled that I don't have to throw my perfectly good printer away! It's amazing that Brother doesn't include this in the manual...or is it? I can't thank you enough!!
True hero. Worked on J985DW
Worked great for me! MFC-J6920DW -- finding the HOME button was the hardest part... LOL