When you buy s TV. microwave oven, fridge freezer post brexit, table lamps etc we should not suddeny return to the old style plugs . You had to effing wire everything up yourself before you could use them years back. Now you just plug everything in with today's electrical goods.
I'm a plumber and sometimes have to do electrical work, I've been using Tom's qoute "brown Is the colour your trousers will go if you touch it" to identify live my whole career
@@deang5622 I doubt he has to do full rewires. Minor works don't require you to be part p qualified. Even then, nothing says they can't carry out the work. It's the homeowner / landlords responsibility at the end of the day.
"you need to have a really inventive baby to be able to put one in there and another in there and then get a shock" honestly if a baby managed to electrocute themselves from a British plug I wouldn't even be shocked I'd just be impressed by the ingenuity of that baby
@@davidrichards1986 wrong! have you seen a french or Spanish plug? The British 3 pin plug was invented in 1928 in the U.K.long before the EU was around. Also all U.K. wall sockets have on/off isolation switches, many EU member states don’t.
Tom Scott is old enough to have been taught how to wire plugs in school, and I'm young enough not to have ever thought of that as a common skill... and we were only born a little over eleven years apart. That's fascinating to me.
When I was a kid, if we got anything electrical for xmas we also got a plug wrapped seperately to go with it which always had a label on it saying it was from the cat 😂
I remember a rhyme that was in one my science books at school: Live is brown Neutral blue Remember this rhyme Or you'll be here too Written on a gravestone
@@ArcticArmy ABCB is a "ballad meter" and it means lines 2 and 4 rhyme… they're both "B". A "common meter" would be ABAB, where 1 and 3 also rhyme. AABB is the traditional "couplet" that Anonymous 376 may have been accustomed to. There are maaaaaany other types of rhymes though, and it may take a specific regional accent to make some work because of differing vowel sounds.
Another interesting fact is that the reason the earth wire is two colours (green and yellow) is to ensure that anyone with colourblindness can always identify it and thus ensure the earth is ALWAYS connected to the right pin.
@@timothyodeyale6565 no, that's why it's yellow green. Yellow/Green Blindness doesn't exist as far as wikipedia et all. can be believed, so no matter what other colour blindness you might have, everyone will see a wire with 2 different colours. And since the earth is the only cable with 2 different colours, everyone can always identify it.
To be fair to the European plugs: if they are built according to standard the pins also are insulated far enough so you can't touch blank live metal. Aditionally the socket is recessed so you can't even reach the pins once you start plugging it in
And they are much smaller. Another thing is that you don't have to be in pain if you are unlucky to step on them. Uk plugs quickly turn with the "spikes" up, if they are lying loose on the floor.
The EU has no regulations on domestic and commercial plugs. It is deliberately excluded from the low voltage directive. The nation states have their own requirements and standardisations - which can differ significantly. Often they copy one another but not always. Malta is the only EU nation that uses U.K - other than Ireland for obvious reasons, plugs. Europe uses 3 different types C, E, F.
Also easier to make a near-flush to wall outlet. Still don’t like that they often spark when being connected. The Australian connector wins hands down on that by having an actual on off switch for every socket.
During WW2 I was evacuated with my mother to a place near Bradford where all the sockets were two pin and round being a nosey kid I stuck my finger in one, well it was finger sized wasn't it, apparently I was propelled across the room at great speed and no doubt Mum had to change my nappy. Now 77 years of age I still have the scar on my index finger it must have given me an interest in electricity because I became an aircraft electrician.
1:09 - With today's standard EU equipment you can't expose live metal by half plugging. You either have an earth-less plug that has plastic neck on their pins (like UK ones) or you have an earthed plug which has full metal pins, but the plug fills the whole socket so it won't allow you to touch metal when it makes contact.
@@Eimrine you only need to touch one wire (if it's the right one) to get shocked. If there wasn't that insulation on the contact pins it would be really dangerous
Electricity always goes the way of least resistance, which in humans case is through the veins, and that’s why the heart is so vulnerable. Also because electricity screws up the frequency that your heart beats at and makes it lose control.
Aldozzy In case you’re not familiar with the show, my comment is a joke referring to Avatar: The Last Airbender. I don’t mean it to be taken seriously. Honestly appreciate the knowledge about how it flows tho, thank you
Camera operator: I didn't see that coming! Tom: no-one ever does... Mate, this guy is a low-key comic genius and I love it!! 👌 I feel like Tom could do an excellent English-style humour sketch show that's both massively informative and hilarious.
That's why as a British child, you learn quite young to leave things plugged in (we can turn the sockets off at the wall, so it's not necessarily going to start a fire). Mind you, if you step on a delicate wee Continental or American plug, it would probably come out worse than you and your foot will heal, but the plug will not.
That's down to the person who fits the plug. It's not a built in feature. Also, a good plug fitter ("such as me), will make sure that the live is the one with the less slack. That way ensures that the appliance will stop working and not have power to it if the flex has been pulled. If the neutral is the one with the least slack, then the appliance will stop working but can still have power to it. That's a short answer!
@@sussertheoriginal Can confirm. I was never taught this, just the colours. To be part of the design, there would have to be something that you'd route the wire around that would collapse when the wires were pulled. Though some numpties would no doubt manage to defeat that.
@@sussertheoriginal More importantly, if the neutral pulls out of the plug while the live remains connected, the exposed neutral wire will likely be live. So yes, Tom's missed that one - that the Live should be the shortest wire.
In France (and some other european countries) sockets are designed with a 15 mm recess to prevent electrocution. So partially plugged in plugs don't expose any pins.
@@sonacphotos Wait you mean right angle plugs? I would say at least for the "side-contact" euro countries that is the standard. The only plugs that do not do that are the 2 pole thin-style plugs.
You could also have mentioned the physical size and shape of the conductor pins. They offer a greater surface area in contact with the socket terminals over round pins. This reduces contact resistance and heating effect at higher currents.
You're less likely to tread on a US plug, but it's far worse if you do manage it. A proliferation of chargers makes it more likely in recent times. I once stepped backwards onto an american wall wart, a camera charger my brother imported. It actually cut through my skin and dug into the flesh, i was limping for days. It was like stepping on a knife. Stepping on a British plug is about the same as treading on a lego brick in my opinion. Unpleasant, but nowhere near as bad as treading on a US plug. You'd have to really stamp on it to get it to peirce the skin because the pins are many times wider.
Tom's actually unscrewing that plug needlessly incorrectly, ironically missing out another safety feature... To open a plug, you just unscrew the single, largest, central screw. That's it. You don't need to unscrew the two smaller screws at the bottom... they're there to simply hold the base of the cable to prevent it from being pulled/yanked. Some plugs even have a plastic ratchet instead of the two screws to securely hold the base of the cable in situ. But damn the plugs do hurt like hell if you accidently step on one on the floor. It's something you only do once!
Regarding leaving plugs on the floor to hurt you when you step on them: In the UK you don't need to do that because many sockets have switches so you just leave the device plugged in but switched off. Another UK safety feature.
I thought all outlets had switches on them. It seems really unsafe for them to not have a switch. I remember when I was like 6 in school we were taught to turn off the switch even if nothing was plugged in because it could be dangerous. You turn it off then you take the plug out and you put the plug back in before turning it on.
@@bigmanrui3503 In the US you'd probably be accused of being a commie or something if you suggested it. The right in this country seems to think corporations have the divine right to do whatever they want. Its infuriating.
When I was 12 I opened up the base of my lava lamp to see what made it work. I saw two metal lumps, one was labeled "+" and the other was labeled "-". Clearly the + meant Put your right finger here, and the - meant Put your left finger here. So I did that. And now, 14 years later, I'm a heroin addict. Electricity is a gateway drug. Don't do drugs above 120V.
I did the same thing with a kind of lava lamp too, but I knew it would electrocute me....it did shock me but it didn't really shock me cuz I expected it anyway
As an American... I do have to concede this one. I had the privilege of living in Ireland for a few years, and I did grow quite fond of the British plugs. The only thing I would also add is that the walls all have a switch on them as well! Instead of unplugging the cord when you are not using it you can just flip the socket off using the switch. I always thought that was quite cool
As a culture we're weirdly obsessed with unplugging stuff. Virtually any British home you go into is guaranteed to have at least one or two plugs just lying on the floor
That's true and even though I have never had one of these buttons fail on me, I never trust them especially when it comes to things like irons and fryers
that's because we don't have enough sockets for all our appliances, easily fixed with an extension adapter but they can take up a lot of space sometimes.
Me : Uses British plug since I was born but didn't know it's the same plug in my country as Britain Tom Scott : You are using the best plug design out there
@@BrianC1664 Ireland uses em too mate 😂 Honestly, I always had this dumbass fascination with plugs😂 and our plugs have always been my favourite. I knew Ireland and Britian use em but where else🤔
The Schuko-plug design, that is common in most European countries, does have some advantages on its own. I.e. you can plug them in two directions... the earth grounding has even got two contacts! The 'live wire' issue is solved by making the plug outlet recessed (in a groove) - quite genius, I dare say
@@marcuslang6153 the pins are square and bigger, so you get more contact area and less heating than round pins. The pin design also means that if a plug is accidentally pulled out, the earth is the last to disconnect. Also, the cable comes out the underside of the plug, so you have to unplug by holding the plug case itself, you can't just pull on the cable to unplug a device, so there is no risk of damage to the cable - I know some modern schuko plugs have the cable go out at 90 degrees from the plug, but not all of them do yet. The switches on our sockets are good too because it means you reduce the amount you plug and unplug, so plugs and sockets don't wear out as quickly. The fuse is also good as a (very) last resort if you are in a house with old wiring that may not have modern RCD/RCBO/GFCI protection. Although Europeans don't allow ring circuits anymore so not as big a deal. The Republic of Ireland uses UK plugs but only on radial circuits, not rings - I think that's the safest solution!
Schuko plugs were developed in 1925 and were established in the 1930s in Germany. So it is a successful history of like 100 years of contempory safety equipment. And since a combination of type E + F came on the market, these plugs can be used all over the European continent exept of Denmark and Switzerland.
@@marcuslang6153schuko plugs are inferior because they aren't grounded when connected to universal outlets common in hotels, which are flat and not recessed. UK plugs are always grounded when plugged into a universal outlet. Laptops for example WILL shock you if the charger uses schuko and you're using a universal outlet.
"You were just expected to wire the plug yourself, I learned how to do it in school." Tom stays teaching me how Britain used to be an absolute lawless frontier pre-Y2K
@Phil M I've yet to see any evidence of that "tells you not to drink the battery acid" thing. And it's also a myth that owners' manuals provided valve clearance adjustment information. That was always in the service manual (which you had to buy specially), not the owners' manual.
@@prva9347 The nice thing though is that cars have got more reliable and need less home maintenance. No more regapping the plugs and points every 6 months. Or trying to tune a carburettor. Or spraying WD-40 over the electrics when it wouldn't start on a cold damp morning. And back in the 1930s a lubrication chart was parodied; A. Put oil in here whenever it goes burr-burr, B. Put water in here whenever it goes buzz-buzz, C. Put grease in here whenever it goes squeak-squeak (about 50 locations!), D. Put [gearbox] oil in here whenever it goes wump-wump, E. Put petrol in here whenever it doesn't go at all.
British plug pros: Advanced security Anti-baby electrocution Unable to touch electricity through metal by putting it halfway American plug pros: Always look surprised
And US plugs are generally in multi-outlet plates (usually 2, sometimes 4, and often included in the same plates with wall switches) that don't take up an unreasonable amount of space.
If you accidentally leave an appliance on, the plug will automatically switch it off by falling out. Also, impossible to trip over a American appliances cord.
I live in Zimbabwe and the house we moved into had South African type M sockets. For some reason, depending on who or when your house was built, you either get South African type M or British type G in this country. We switched all the sockets to British type G for their safety. This also means having a box of spare plugs and a screwdriver handy to rewire any new appliances that come with type M plugs.
Denmark here, we got all that, well except for the built in plug, and we don't have a risk of it landing in a way that will be painful to step on. We made that mistake already with lego!
But the Danish plug doesn't have the insulated neutral/live so it's still possible to shock yourself if you get something in between a half in plug isn't it?
@@spudguy5 I live in Denmark. Some of my plugs have it, but most of them don't. Also, those shutters in the live and neutral that is in the danish sockets work differently than the British ones. In a danish socket, you can still put a screwdriver in there (I think, it's not like I've tried) as the shutters just do so that you have to push a little harder to get the plug fully in, and you have to hold the plug straight in order to get it in. So a baby would probably not be able to stick something in the socket as they have to push hard, but a kid can easily stick a screwdriver or something in there, I think.
@@spudguy5 You may get shocked, but 1) Danish sockets only make contact when the plug is almost entirely inserted, so you really have to make an effort to hit the sweet spot where you the pins are energized and the gab is wide enough that you can actually touch it with something conductive. Newer danish sockets also have a slight indentation around the plug making this even harder, and 2) it is mandatory in Denmark to have a high sensitive residual current and surge protector (HPFI) circuit breaker fitted to the main fuse board, so even if you do manage to get a brief shock, you'll likely be fine. These things have gotten seriously good over the years
I loved the fact that each plug had a fuse when I lived in England. The power voltages are different than what I was used to in the US, and a few fuses blew on me and knowing about this made life a lot easier. And you didn't even mention that individual outlets have their own "On/Off" switch. To this day, that fact has struck me as genius.
@@MorgorDre British plugs have generally had their safety supplemented with circuit breakers at the distribution board in the last 30 years. Consequently, fuses hardly ever blow these days because the circuit breaker cuts in much faster if there is an imbalance. The only time fuses blow these days is in older houses with older fuse boxes, or if someone has fitted the wrong rating of fuse in the plug.
Another great aspect of this design is that you can't unplug it by just pulling the wire, you have to pull the head of the plug instead. This ensures that over time the wire doesn't get damaged at the junction of the wire and plug, like most other plug types do.
@@axis9038 not sure there were many school shootings when in USA when the UK had a shortage of copper and as I understand it, the price of healthcare was reasonable when we had the shortages of copper too, now we have plenty of copper, free healthcare and can count the number of mass shootings in the 20th and 21st centuries on my fingers.
I've actually seen a British plug that didn't have insulation on the live prongs. Of course, it was on an American made travel adapter designed to allow you to plug American appliances into British outlets.
Older ones did not have the insulation. I am old and still have a transformer from the 1960's with completely metal pins but I know not to stick my fingers behind it!
@@xenon53827 Before the metal pins were insulated, inserting the wires into the socket and then pushing in a plug to hold the wires in place was often convenient. Of course, historically, appliances were sold without plugs, and the buyer would need to fit their own. Naughty engineers would also use a single strand of copper wire to bridge a blown fuse.
I've been scrolling and laughing, ahhh nationalism! I wish everyone on Earth could be proud of being a member of our species, Homo sapiens, and support each other. All technology that has ever been invented by a human has been inspired or influenced by the knowledge and inventions of other humans. Technology improves incrementally and sometimes in giant leaps, but it's all inspired by other people's ideas from other places, states, nations etc... I'm tired of tribal us/them thinking, and all the problems and bloodshed it leads to.
+rimmersbryggeri 2.5A Europlugs are partly insulated, but the larger 16A plugs used in the sockets which also accept Europlugs are not, This is a problem because there are still many non-recessed CEE 7/1 sockets in use (and still on sale) in some European countries which provide no protection from touching the live pins. (They also provide no earthing connection.)
Ok I have never seen a modern non earth plug with non insulated pins though and the old ones that are non insulated dont even fit in an earth jack. Sure there are unearthed jacks in houses build prior to 1980 or something like that here in sweden but as soon as some renovation is done by professionals they are replaced since it's illegal for them to re install unearthed except off course the special sockets that will onlly take the flat euro plug used on small appliances and lights but those are always recessed. I have seen none recessed sockets in spain and yeah that seemed a little half baked..
+rimmersbryggeri CEE 7/1 sockets are still common in the Netherlands and France. The whole family of European plugs which is referred to as types C, E and F were designed in a bygone age for a distribution system which no longer exists. It is a thoroughly compromised system because new safer designs were always compatible with what came before, thus ensuring that safety could never be assured.
fatallyflawed1947 Yeah in the old days the would insulate wires with tared linen too and if the fuses tripped alot sometimes replace them with something more solid. (nails, iron plugs etc) This had happened in a barn where my dad was working in the 70's which ended up burning down. The guy my dad worked for (recently bought the farm) was a smart guy though so he did it properly when he re built it.
Dangerous_CODE Italians also drivew at motorway speeds while looking in the mirror.. A little excitement is good. ;) I don't think it's legal to install the none recessed pulgs even in italy anymore though.
I like the on off switch some plugs have. That allows you to easily turn off electronics that continue to use electricity when turned off. When I was a toddler here in Michigan USA I liked to put my shoe strings into the outlets. My father got safety covers for the plugs and spent a lot of time installing them. My mother told me I had figured them out within an hour of dad finishing.
I really like your videos and they are usually very interresting - but this one is so wrong, it hurts :) Let us debunk your list and compare it with the CEE-System, which almost any other country in europe uses - lets focus on the universal CEE 7/7-Plug: 1) IP44-Sockets are also Guarded and you cant plug in a CEE-7/7 plug into the socket - instead of earth pushing the safety away you need to push them both at the same time, if you shove in a screwdriver in just one hole it does not work eiter 2) the Pins on the CEE-7/7-Plug are also insulated half way up, you cannot touch them anymore as soon as they are plugged in 3) your explaination is pretty much wrong: the fuse inside is useless as a safety feature and has, as you explain, just historical reasons since the UK electric wiring uses a ring system instead of single lines whic are all fused at a central point and have an additional residual current circuit breaker - of course some devices are fused separately, but there is no use to fuse the plug itself - just a waste of resources, since the cables on lots of devices are interchangeable (for example computers, printers, fridges ... - they pretty much all use the C13/C14-System) therefore UK devices which offer additional safety do not use just a little melting fuse, the use miniature circuit breakers in each plug or device. to be on the safe side, you need to test those regularly - but who does that, if he does not know the device has one? if you have just one in your home, it is way more paractical and therefore safer 4) the slack in the earth wire has nothing (directly) to do with the plug - this is, in fact, a common rule in lots of applications were you have something earthed - this wire has to be longer to be pulled out last _if_ the strain relief fails - therefore this also Applys to the CEE-System and even the device side where the cable might be hardwired Additional features which makes the CEE-System superior: 1) The Typ F Socket, which can accept the CEE-7/7-Plug has 2 Pins for earth, not just one - both are connected before the live pins even enters the holes 2) due to the ring topology of the wiring in your home, you can save resources by using a smaller wire crosssection but on the other hand you have no way to determine if the ring is poproperly closed - since there is not always general fuse (because the system relies on one fuse per plug) there is always the danger of burning your house down, if something in the ring fails and draws too much power, this cannot happen on CEE-Systems because every wire has to be dimensioned properly to the fuse it is connected to - for example if you use 2,5mm² wire, you need to put a 16 A fuse in the circuit 3) the plug itself has a tight fit in the socket and is not just held there in place by the pins, so it is safer and cannot be pulled out by accident And of course dere are disadvantages both systems share: In the past, the plugs where made form different materials, for example they used phenol formaldehyde resins for the casing - if you use modern thermo- oder duroplastics with similar physical properties, you have an unneccesarly bulky plug - also the manufacturing of the pin shape makes it way more expensive the the manufacturing process of the CEE-System-Plugs with round pins, this therefore both could be smaller and easier to manufacture This leaves one single advantage over the CEE-System you have not even mention: CEE-7/7 does not feature a polarity protection - which the UK plug in fact does - you might suggest, that this does not even matter in AC circuits, but it is a problem with faulty devices - for example if you have a lamp with an edison socket and change your lightbulb - you can never know if the outer thread of the socket is neutral or the live wire/phase - this is a problem if the switch on such device does only disconnect one of the wires to shut off the light and not both
No, NO, more nonsense! Only some European countries require shutters, Germany is on of those that does not. The CEE 7/7 plug DOES NOT have sleeved pins! you are right about Tom's explanation of the fuse though, he does not understand it either. The fuse is there for the specific purpose of ensuring adequate protection of the flexible cord between plug and appliance, nothing else. It is NOT a result of the ring final circuit, although sadly many Brits connect the two things. It does not matter that you can move a cord between different appliances because the fuse is installed by the manufacturer to match the cord, not the appliance it will be used with. Ensuring that in the event of the cord becoming disconnected the earth is last to break is a specific requirement (clause 11.8) of the BS 1363 standard. Your claim that the Schuko system is safer because it has two side clips, not a single pin, is nonsense because the Schuko is designed to also fit non-earthed CEE 7/1 sockets, there are NO non-earthed BS 1363 sockets! A ring which becomes open is not great, but is no more likely than a poor connection in a radial circuit. The probability of an actual problem being caused in a ring is extremely low, there no evvidence to suggest otherwise. Also, consider that even if the ring is broken, all sockets still have a solid connection back through one side or the other of the ring. A poor connection in a radial means that each socket after the problem is drawing current through that fault with the consequent fire risk due to arcing! A BS 1363 plug has a very secure connection to the socket because of the pin geometry. BS 1363 plugs never come out by accident (unlike CEE 7/16 plugs which are very prone to that).
An elderly now ex-colleague of mine discovered he had leukemia after standing on a plug in the night. He went to the doctor once he noticed that it wasn't really healing. Thanks to that he got treatment and survived. He is currently enjoying retirement. negative to eventual positive :-)
All of those safety features are present in modern European plugs, except for the internal fuse. Outlets are required to have a "well" to make sure the pins cannot be touched once they are in contact with the socket.
Also, on Schuko outlets, the grounding will always be in contact with the plug when inserting, it can never happen you manage to partially insert the plug without grounding. The ring circuit is inherently unsafer than separately fuzed circuits.
@@Djrepsaj exactly. People are being really dumb about the fuse. Its like wearing 2 condoms. If your house doesnt have aids (ring circuit) why wear a second one. (I know wearing 2 is actually worse)
@@OcarinaOfVali I disagree. It's rather clunky to have to make everything safe for 13 A that can be plugged into an outlet connected to a circuit protected by a 13 A fuse. So it makes sens to have a fuse in the plug that fits the cabling of the thing you're plugging in.
In Australia, only a licensed electrician can do any electrical work. No wiring plugs, no fiddling with power outlets. My physics teacher used to say "one flash and you're ash." When Tom said that up until 1992 people had to wire their own plugs, well... my trousers changed colour too.
We use 110 volt for normal appliances here in the U.S. If you get shocked you'll definitely feel it but you won't die. I've been shocked while doing electrical work and came out unharmed.
220V AC is the European Standard. 240 V AC was the Australian and New Zealand standard, but since 2000, some Australian States have dropped their mains voltage to 230v AC . The intention is to make Australian manufactured products aligned with its main trading partners. I've wired plugs up in a few countries - Australia, UK and Europe, but from my experience, the Australia/New Zealand plug is the best. The UK fused plug would never be permitted there.
The problem with such low voltage is that because of half the voltage, you need twice as much current to do the same work. That means thicker and more expensive and heavier cable. There are ways to stop you from getting electrocuted and many countries with voltages above 200v have what they called "Earth Leakage Circuit Breaker". which shuts off power if the current flowing out on one wire isn't balanced by the current flowing back. From my experience, it works very well.
Done that many of times. Back in the day we would have maybe 3 or 4 plugs but many more appliances so we would just swap them round to wedge the bare wires into the socket with. I got shocked a couple of times but I'm still here to write this so no harm done.
i always struggled with getting a screw driver into the slots. all i have to do is turn the plug upside down. thank you i can now stick my screw driver in.
This is really clever design :D but one "comfort" feature I'd say is missing, in the EU you can plug the plug upside down. So if you want to power something above the power outlet you don't need to twist the cable around.
Hell, look at that huge plug though. I've stepped on many lego barefoot before, and yes it hurts, but god damn that huge plug sticking STRAIGHT up if you stomped on that full force unexpectedly while walking around in the dark... that'd go beyond a lego, sorry.
True that, the thin ones are isolated down to half length, and the Schukos only fit into well-shaped sockets so by the time it's out of the well, it's already disconnected.
It's also nice that both pins have to be inserted at the same time, or else the shutters won't open. With the rare exeption of your physics teacher single-handedly shoving two cables in a socket to demonstrate transformers.
mistral55 Stand on a plug and feel pain for a couple of hours; touch a live wire/plug and you will never feel pain again!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The insulation part is by far the best part of this. As far as shudders, in the US they are called "Tamper Resistant" receptacles and are now the standard electrical code for new installs. I do like that the US plug is far more compact. The UK plugs are SO GIANT that makes things super awkward.
Some have worse plugs, yes, but the German Schuko plug is objectively better than the British plug. - Tom Scott even showed some examples where the British plug fails, such as if you insert it upside down ... but a Schuko plug can be inserted in both directions without any issue. A Schuko socket has a smarter child protection system; the British plug simply requires you to insert a thing in the earth-hole, and you get access to the socket. But the Schuko plug require you to insert pins in both holes at once, with equal pressure, which is something not even an adult can do reliable. A Schuko socket is even adult safe!
Liggliluff You can’t normally insert the British plugs upside down. It was a flaw in the design of that extension cord, not the plug. There is usually a much larger distance from the top of the plus to the end of the plastic making it impossible to insert upside down
@@Liggliluff I don't think that applies to every German power socket, you can insert a phase tester in most sockets in our household. Many people buy child protection adapters, if they have children. And don't mention the war! :P
I don't know how you would get a shock from an EU plug by plugging it halfway in. Only the tips are metal and you can't get a finger in there once the plug is far enough in to touch the contacts inside.
The old sockets in my parents'house just have open holes where a kid might put something in and get an electric shock. The more recent ones have shutters that open only if you put something into both holes at the same time.
The German cee 7/3 is one of the safer European sockets it's true apart from the lack of switches and flex protecting fuse (the breaker protects the house wiring, but the fuse protects the flex, a 0.5mm^2 flex with a 16A mcb is not sufficiently protected, one with a 3A fuse in the plug is) The CEE 7/1 socket on the other hand is not well protected at all, the 7/5 is nearly as good as the 7/3 however
I was taught how to wire a plug in 2013, but I wasn't told why it was a skill many Brits had. I had to watch this video to figure that out, for some reason?
I've actually stepped on an upturned plug - it actually stuck in my foot, and in the shock, I was like "Huh. I'm a socket." Theeen the pain, and blood, and screaming came.
Correction: The EU plug pins are, here in Germany at least, also covered in plastic half way through and the plug itself inserts into the socket so that you can’t even see any pins at all.
The earthless type is insulated, the earthed ones are a bit larger and usually have to go in ~2 cm, though they are a bit of a hazard in the ~0,5cm deep earthless sockets.
Ever noticed, that remarks like "The best in the world" are only used by UK and US people? That's because they live in their own buttle and hardly get out to see the rest of the world.
You description of the plug and how many British houses are a single circuit wired actually explains several stories I've come across where one shorted plug knocks out all the lights. That's less likely to happen in the US because we generally take 240v off the power line and split up at 120v for several fused circuits.
Interpretation is a funny thing, from my perspective it sounded more like a snarky comment about how youngsters now know something, but perhaps it might be a joke, I don't really know anymore whether it's an insult or a joke.
The German ones used all over Europe are better and safer actually, and here is why: CONTACT: As you have just shown, it is possible to put the plug upside down, which makes contact possible. Also this kind of system to open and close the protection is known to break in many cases, either rendering your outlet unusable or unsafe. Which is why European plugs are symetrical, have very tiny holes and don't have moving parts. The sequrity works differently, and it requires bot points to be pressed at the same time. Also the European wall plug is designed to be used with a special lock, that is dirt cheap, or even comes free with the plugs, that insures that only with a special plastic key can someone open the lock. Great for outside plugs, and keys. INSULATION: European sockets are actually kind of a hole, about 1,5 cm inwards, which means that when full sockets are half pluged, no metalic parts actually show up. Whith half sockets, the same insulation is applied in European plugs too. Not to mention that, by design, European plugs can be used outside in any weather. CONSTRUCTION: There is a reason we say things are "screwed'. Screws are a terrible idea in plugs, which is why European plugs don't have any. All the systems are fused in place with many layers of plastic, which means its impossible to disasseble, and adds to safety. European plugs have another advantage. As you said, Brittish households have a common circuit for all sockets, not all Europeans do that though. Every room here has its own circuit with its very own fuse which are all located on a central panel, which means that if an appliance breaks the circuit of one room, the others operate fine, and you your socket, and plug are good as new. Which is why all of the above are common in all of Europe, and its only the Earth point that is different in some countries. ADDED BONUS: Generally, European outlets come in 2 sizes, the full ones, which are 40% smaller than yours, and the half one which are TINY :O . So smaller plugs here can acomodate more devices. Half outlets are also designed in a way that full ones cant get in. Not to mention that they never, by design, land with their points up... I don't think there is any kind of pride in the plug. But the fact that half of the world uses the german plug or some variation of it, even back in the day when the UK was the exporting power of the world, proves that it is, by far I would say, a better design.
The absolute nonsense of this post is summed up by the stupid claim at the end that: "half of the world uses the german plug or some variation of it" Well, if we take the ten largest countries by population only two of them use a national standard based on the German plug! Those ten countries represent 56% of the world's population, and subtracting the populations of the two exceptions (Russia and Indonesia) still leaves over 50% of the world population in the remaining eight! And that is before we consider the remaining 240 countries, about 50 of which use the British plug described, about 45 use the American plug, about 30 use the old round-pin British plug, and about 20 the same plug as China. You should not talk about "European plugs" or "European Outlets"" which are terms which describe many different plugs, including the one described in this video (Britain is part of Europe after all). Of the 28 EU countries in the EU, 18 use the German “Schuko” socket, 4 use the French socket, and 4 use the BS 1363 type. Denmark and Italy both have unique types, with several variations of each! French plugs will not fit into non-French sockets, German plugs will not fit into non-German sockets etc. There is also a hybrid plug which will fit into both French and German sockets. An attempt was made to introduce some form of interchangeability by creating the Europlug (EN 50075) but this is an unearthed plug for use with low current (
Are we seriously going to argue about a fucking wall plug? Every device that I carry with me has worked in plugs in Germany, France, Greece, Turkey, Italy, Spain, Denmark and Sweden. I know it's technically not a common standard but its close to the point of me not giving a fuck when going abroad, which is not the case for you. Regards.
***** But, for the reasons given in my response to TheThOdOr1s above, they are most definitely not similar regarding safety, it is a matter of fact, not opinion. Being able to reverse line and neutral is just another safety shortcoming.
@@carwyn3691 All things plugged in will bleed some energy. Called "standby" electricity loss because it's so often associated with electronics in standby or idle mode, it's also known as "phantom" or "vampire" electricity (for obvious reasons). Even turned off, many appliances keep drawing power
@@neamhdhlisteanach6720 no, this is wrong, if you just turn your TV off with the remote and do nothing at the wall socket, then yes it will draw 'standby' power, but if you switch it off at the wall then the circuit is broken, it draws no power, it is the same as taking the plug out of the socket. (The only exception being in lightning storms, lightning strikes that get in to the power lines have high enough voltage to jump the little gap in the circuit caused by the switch in the off position in the socket, so it can still damage your electrical items if left plugged in and switch off, it would also blow the fuse in the plug.)
Kai Blahnik >implying school never taught you that >Implying subjects like math and science do not prepare you for anything Go back to school and pay attention next time
+Péter Baán I kind of like the type K, it looks like a smiley face :D Though I always thought the American type B looks like a man who is utterly horrified.
***** C is a bit.. well I don't consider it very safe, but sometimes comes handy when you don't need that much of safety, or ground loop. However I don't consider safe the fuse in the plug either. How dum idea it is? I know the historical reasons but such an intelligent person he is and yet consider this plug the safest option when a child could simply grap a screwdriver and burn the house or worse. No one can do that with the C and F type with a generic every day use screwdriver.
1:50... that is really amazing to me. All appliances I've ever seen (unless they were self-powered by batteries) have plugs on them. I've never even heard of having to buy your own plug. (Not in the UK)
What you happened to left out is that European plugs (EDIT: Notice the plural. This applies to most types of plugs in the EU. It's not a type of a plug) are deeps as a damn valley and they disappear in the socket BEFORE the pins could touch live. Also, a huge pro for UK plugs is that they are polarized. Furthermore, in normal European plugs you have the same earth-is-the-last-to-pull-out rule and it works just as well. Most of the time it is indeed the longest for the same exact reason. And the fuse? If you run something like 95% of where the fuse will blow, you will have a nice little heating element that can melt the plug. Bigclive had a video on one of those.
Firstly, there is no such thing as a "European plug"! There are MANY European plugs of which the British plug is one. I expect that when you say that "European plugs are deep as a damn valley" what you are actually referring to is the German Schuko socket (CEE 7/3), or the French socket (CEE 7/5), but that is to ignore the other very common socket into which both German and French plugs are designed to fit, the CEE 7/1 unearthed socket which, apart from providing NO earth connection, does NOT have a full recess, and certainly does NOT prevent touching the live pins of a partially inserted plug! There are still many, many millions of CEE 7/1 sockets installed in many mainland European countries, and they are still available to buy new! As for the nonsense of overheating fuses, the BS 1363-1 plug standard, and the BS 1361 fuse standard together ensure that this cannot happen in compliant products. Every plug model sold in Britain is subject to rigorous type testing against the standard before it is granted an approval licence. Non-approved products are illegal.
CEE 7/1 is a socket, not a plug. It is still in common use in many European countries. Although most CEE 7/1 sockets on the market today are as deeply recessed as a CEE 7/3 or CEE 7/5 socket, this has only been true in the last few years. The vast majorit of installed CEE 7/1 sockets have only very shallow recesses and provide no protection against touching the pins.
Thought I knew how to wire a plug seeing as I too remember the days of "plug not included". In fairness I did teach myself at the age of about 6 and was responsible for wiring every new appliance, but... ...never knew about leaving the earth longer than needed for the connection. 50 year old and still learning. Thanks Scott.
Every new plug comes with a piece of cardboard slipped over the pins with a diagram showing exactly the proper length of each conductor and how much outer and inner insulation to strip. Also, a coloured picture of where to connect each wire. Do not ignore it or throw it away! The plug that Tom shows is the usual, cheap version with screw terminals; the stranded wires need to have a ferrule ('bootlace end') or they will become loose over time causing overheating and damage to the socket. BTW, my tip is to remove all three terminals from the plug before wiring them. I recommend the far superior MK plug with large wrap-around terminals! Our family house had the old round pin sockets (BS546: 15A, 5A, 2A) until I was ~13 years old so I have only been dealing with the BS1363 plugs for sixty years.
Well, you can not touch the live parts while plugging in a European-Schuko-plug. That's impossible, as your fingers needed to be like 2mm thin and very flexible for doing so.
WTH your sockets are really small and weird the only thing I see fitting in there are tooth picks and if someone makes metal tooth picks imagine what American kids would do to themselves cause of that
In the 1960s UK houses had a number of different socket designs, before this pattern became the norm. So appliances came with bare wires so you could fit the style of plug you required. (They could have demanded appliances came fitted with one of these plugs a lot earlier than 19922, though. They were standard long before then.)
Can confirm as well! In Bangladesh, probably due to British influence from a long time ago, we still have so maaanyyy different plugs, and also these British ones. Indeed these are the safest ones. Then when I went to UK and saw these, I found out that these are British haha.
A thing about most european sockets: they're either recessed, meaning that you can't access the pins on the plugs when you've inserted them. Or the prongs only has exposed metal at the very tips, so once it's actually inserted deep enough to make contact, only the plastic part of the prongs are accessible.
@@cgi2002 if you live with a kid you can put small coverings into your outlets that requires a twisting motion and the cost around half a Euro. I'd say that is a small price to pay for the compact and rotationally symmetrical formfactor.
@@antonf.9278 not just about the form tho. 2 pin plugs don't have an earth, making them inherently less safe. Would also point out many having a recessed socket, the socket itself has to be recessed deeper into the wall itself. Also you can't have a "recessed" extension lead or multi adaptor, which if I'm honest probably account for more than half the sockets in my house.
@@cgi2002 *2 pin plugs don't have an earth, making them inherently less safe.* These are only used on devices where earthing is not necessary, they aren't inherently less safe, unless they are used in wrong (unlawfull) way. *Would also point out many having a recessed socket, the socket itself has to be recessed deeper into the wall itself.* Yes and no. Yes, those that are more or less equal to the wall recess into the wall, however those that can't recess into the wall have a recess outwards (or better a "box" outwards with the recess in it), the latter just looks more ugly and might be more annoying for furniture, but you never use this unless absolutely necessary or you don't give a f*ck. *Also you can't have a "recessed" extension lead or multi adaptor* Really? All my extention leads or multi adaptors have this recess, so far I know this is standard (at least where I live). I have never known a non-recessed socket (wall mounted or otherwise).
@@MDP1702 the earth not been needed arguement isn't reasonable. An earth is never needed until it is, and when it is, a 2pin plug can't have one. For example a toaster with some metal on the outside, in the UK should that metal case somehow become live (lose wire inside for example), the earth deals with the danger. A 2pin plug has no way to deal with this danger, the case remains live and should you touch it, you become the Earth. This is a case of "in normal operation it doesn't need to be earthed", but the earth exists for abnormal operation, it's just an extra safety step that has saved countless lives. As for the recess, you said exactly what I meant. To male the plug level with the wall, the socket must now stick out from the wall rather than been flush with it. The extention lead is the same, a UK extention lead can be about 3cm deep (a tiny bit deeper than the pins on the plug itself). To have a recess yours needs to be thicker. I would note however the shape of your plug and the shape of ours means that this difference overall is actually not important. The extention lead may be 3cm deep, but the plug is also about 3cm deep (unless it's a transformer plug then its way bigger), so 6cm. Yours the recess itself makes the original lead 4-5cm deep but 2cm of that is overlapping with the plug itself, so all told they are about the same depth when a plug is in the socket.
I love it! This video perfectly shows that the job of an engineer is not to make something that works when used properly, it's to make something that still works when the person using it has no idea what they are doing hahaha
Which is the actual application of Murphy's law (when designing something, assume that everything that can go wrong will happen, and every mistake will be made)
To reference Murphy's law a bit more obliquely, the problem wasn't that some idiot plugged the toaster in backwards, it's that some idiot _designed_ a toaster that _could_ be plugged in backwards.
+Jacksirrom I'll have to agree, from a electrician' point if view it's awesomemly designed. From a mechanical point of view it's jsut a tad too big :/ So overall I'd give it an A- (Safety is much moore important than convinience)
+Jacksirrom As a user of the British 13 amp plug and socket, I am also a big fan of it from the safety and usability point of view. The fused plug ring-main system also means we have easy access to LOTS of power points in the home. But you are right. The 13 amp plug-top is bulky, especially when not plugged in... (stored). I also wish more electrical goods could be designed with an understanding that being stored is what a LOT of electrical goods spend MOST time doing....('phone chargers, hairdryers, etc). I am asking for the items to be shaped more like a reel, so the cable can be wrapped up, and for somewhere to be provided for holding the end, with or without a plug.
Excellent video, bit of general ignorance re. the reason that pre-war British plugs and current European ones aren't fused though: The purpose of the fuse is to prevent the flex on the appliance from melting/bursting into flames. It is true that radials are usually fused lower than ring-mains but, because they generally run multiple sockets, they are generally still much higher than the safe rating of a flex for, say, a lamp. A british plug fuse can be as low as 3A, while a European radial could be 16A. In fairness to our continental neighbours though, the French/Germans worked out the importance of separating fingers and pins before we did and achieved this by sinking their plugs into recesses so you couldn't get your fingers onto the pins until they'd been withdrawn (hence the common name SchuKo or Schutz-Kontakt, meaning shielded contact).
+fred karno - I couldn't speak for all of Continental Europe, but I've never seen a fuse lower than 16A here in the Netherlands, and with the exception of 21A, which is used in some older domestic setups, nearly all houses use solely 16A fuses.
A flex is the wire from the plug to the appliance. It's often much lower rated cable than the circuit (so a table lamp might have a cable rated for just 3 amps). In principle, there could be a fault where a high enough current was passed through the flexible cable for it to overheat but which would not be high enough for the circuit breaker to trip. They are called a "flex" as they are flexible cables as opposed to the semi-rigid ones used for fixed house wiring. A ring circuit is one where a wire starts at the distribution board and then loops through a number of outlets before returning to the distribution board. As each outlet has two routes back to the distribution board and it avoids duplicating a lot of radial wiring it means higher currents can be carried and less wire used. It's really only in the UK were ring circuits are widely used, and a typical house will have at least two, each rated at 32 amps. Whilst more economical too install, they are more demanding to test and validate so are not favoured by some.
It's true that the fuse would stop the wire melting, but I really don't think that's the purpose: the metal case of an appliance is usually connected to ground, so that if a live wire comes loose internally and contacts the case it DOES send a large current to ground. Which then blows your fuse. The idea is: make the failure mode break the fuse, rather than potentially injuring someone.
The European plugs are just as safe, if not safer. The outlet is always sunken so by the time the pins can contact, there is no way to jam your finger in there. For the UK plugs the insulation could come off due to damage, this isn't possible when the entire plug is used as insulation. You also can't put a screwdriver in because you need equal pressure on both sides to open the little covers. The fuse in the plug would be redundant because there already are fuses for everything in the main fusebox. I would even say it is safer this way because you won't have to screw open plugs when a fuse burns. People could become lazy and not close the plug properly afterwards, or they could put in a bad fuse that allows more current or they could just connect it with copper wire if there are no fuses lying around. In the fusebox it is just a matter of flipping the switch back up, you really can't do it wrong. Also you can connect plugs upside down when there is no ground needed. Super handy when trying to fit bulky plugs.
Often you don't have to open the plug to change the fuse: it is common for it to be mounted in a carrier that pops out of the face of the plug. Then you replace the fuse in the carrier and push it back in again. Now that all appliances are supplied with a plug already fitted the plug is often moulded on and sealed so the pop out fuse is the only way to replace it. The breaker in the fuse box is rated at the maximum capacity of the circuit to protect the mains wiring. The fuse in the plug is rated appropriately for the device, so in most cases will be a 3 or 5 amp fuse with 13 amp fuses used only for devices that actually need them. So both are useful but for different reasons.
We use those plugs here in Malaysia too, never thought they were from Britain. Edit: damn this got more likes than I expected. Colonialism has brought us together lmao.
One thing I've noticed is that the pins on British plugs appear to be more than double the thickness of the ones we have in Australia, its really easy to bend ours and even break them off if you step on one, I even saw someone partway plug a socket in then jam his finger in there to straiten the pin...
the european design we use in germany is the best one in my opinion, it grants all the same safety features but takes less space, almost all plugs are waterproof, you can use it upside down, usually its easier to pull it out, its very unlikely you step on a pin of the plug because they are rounded, devices that dont use "earth" because theyre in protection class 2 can also be plugged into safety shutters. should I continue?
You need a baby who is sufficiently adept at pressing two suitably sized objects with equal force into the two holes, so yes, the method often used in Europe is a good one (although not as good as the alternative British method, which Tom did not describe, which is also operated by simultaneous insertion of Line and Neutral, but only works when the earth pin is also in place!) The problem with shutters in mainland Europe is that they are a relatively recent introduction, and not all countries (eg Germany) require their use! The majority of sockets in mainland Europe do NOT have shutters, whereas every single BS 1363 socket ever made does!
True, I hate the new power strips that are mandatory since a couple years because it sometimes really is a pain to get your plug in, especially when the power strip is a bit out of reach (and I'm not a baby :D)
I was told my my parents when I was two years old, some how got a hold of my father's tools and completely dissemble an electrical outlet. Shutters would not have stopped me.
Good points. I like Type F because the outlet is recessed in. At no point is the electric prongs exposed because the prongs are the same distance as the recess. It also avoids moving parts on the outlet. Or having to insulate the prongs.
Pro tip: Concerned about stepping on a British plug in the dark of night? Simply scatter Lego around it in order to warn you of imminent pain.
r/ShittyLifeProTips
ive stepped on a plug many times and the next hour was in the hospital
Australian plugs seem to be less dangerous, the live and neutral plugs are diagonal making them bend when stood on.
It is a good thing electricity does not come out of the plug but into it. That would be really bad.
r/FoundSatan
Wired flex but ok
Wired? Get a wireless flex old human...
Stop
When you buy s TV. microwave oven, fridge freezer post brexit, table lamps etc we should not suddeny return to the old style plugs .
You had to effing wire everything up yourself before you could use them years back. Now you just plug everything in with today's electrical goods.
@@dvidclapperton we found the boomer
Reported for nudity.
I'm a plumber and sometimes have to do electrical work, I've been using Tom's qoute "brown Is the colour your trousers will go if you touch it" to identify live my whole career
@DoctorPretzel, are you in the UK and Part P qualified?
It's such a good rule of thumb, I've used a few times when wiring stuff
And Tom keeps a straight face when saying this!
@@deang5622 I doubt he has to do full rewires. Minor works don't require you to be part p qualified. Even then, nothing says they can't carry out the work. It's the homeowner / landlords responsibility at the end of the day.
Red is much easier to identify than brown...
"you need to have a really inventive baby to be able to put one in there and another in there and then get a shock"
honestly if a baby managed to electrocute themselves from a British plug I wouldn't even be shocked I'd just be impressed by the ingenuity of that baby
The baby would be shocked tho
you wouldn't be shocked; but the baby will - ah dang it someone beat me to the joke
@@ImGadz absolutely deleted
You might be impressed, but that baby's a gonna
That’s shocking! For the baby
This guy talks about stuff that SHOULD be boring, But honestly it's really fascinating.
edit : jeez this has blown up wth
It’s not boring it’s brilliant
Pog
Thank you pog fish
If it's boring it's only because of people teaching the wrong way.
This is what great script writing does
You didnt mention that the cable colours are chosen so that A “green-red” colour-blind electrician can identify them.
i got taught in school green yellow was also a safety feature incase a child is pulling on them they're more likely to go for the loose colourful one
Can't really credit the UK with that. It was an EU thing we had to follow
Colour blindness runs through my family's genes and I never I knew this fact. Very interesting.
@@davidrichards1986 At which point we were part of the EU and part of the directive ;) joint venture.
@@davidrichards1986 wrong! have you seen a french or Spanish plug? The British 3 pin plug was invented in 1928 in the U.K.long before the EU was around. Also all U.K. wall sockets have on/off isolation switches, many EU member states don’t.
Tom Scott is old enough to have been taught how to wire plugs in school, and I'm young enough not to have ever thought of that as a common skill... and we were only born a little over eleven years apart. That's fascinating to me.
I retired three years ago, I was still teaching it.
It's still on the GCSE syllabus if you take the right subject.
Luckily my father taught me how to wire plugs. My school never thought it was important but I use this skill very regularly.
That is not good if you do not know how to wire a plug-top. My Father taught me how to wire one (and to wire a ring main).
I was taught it in both primary and secondary school. I think Tom is like 8 or 9 years older than I
When I was a kid, if we got anything electrical for xmas we also got a plug wrapped seperately to go with it which always had a label on it saying it was from the cat 😂
Now that’s a generous cat. Minimum wage for cats being what it is and all... 😆
Ah, that gave me a chuckle. 👍
Falling asleep at night, for the last time, a thought crosses your mind... "but we don't own a cat!"
this might seriously be the best christmas story I have ever read!
*household cat, giver of plugs*
I remember a rhyme that was in one my science books at school:
Live is brown
Neutral blue
Remember this rhyme
Or you'll be here too
Written on a gravestone
@@ArcticArmy ABCB is a "ballad meter" and it means lines 2 and 4 rhyme… they're both "B". A "common meter" would be ABAB, where 1 and 3 also rhyme. AABB is the traditional "couplet" that Anonymous 376 may have been accustomed to. There are maaaaaany other types of rhymes though, and it may take a specific regional accent to make some work because of differing vowel sounds.
'AC holds ya, DC throws ya'
@@Anonymous-376 _sigh_
@@thejadedcommenter7371 thank you for notifying me just to say that
@@Anonymous-376 _siiiiigh_ /j
Another interesting fact is that the reason the earth wire is two colours (green and yellow) is to ensure that anyone with colourblindness can always identify it and thus ensure the earth is ALWAYS connected to the right pin.
Only if you know where it goes.
Right pin is wrong, the top pin is right tho~
Depends what type of colour blindness
@@timothyodeyale6565 no, that's why it's yellow green. Yellow/Green Blindness doesn't exist as far as wikipedia et all. can be believed, so no matter what other colour blindness you might have, everyone will see a wire with 2 different colours. And since the earth is the only cable with 2 different colours, everyone can always identify it.
@@reappermen Wikipedia isnt the most accurate source
To be fair to the European plugs: if they are built according to standard the pins also are insulated far enough so you can't touch blank live metal. Aditionally the socket is recessed so you can't even reach the pins once you start plugging it in
and most of schuko outlets have shutters where you need to depress both of them with the plug to open.
@@thesayxx most New schuko do
And they are much smaller. Another thing is that you don't have to be in pain if you are unlucky to step on them. Uk plugs quickly turn with the "spikes" up, if they are lying loose on the floor.
The EU has no regulations on domestic and commercial plugs. It is deliberately excluded from the low voltage directive.
The nation states have their own requirements and standardisations - which can differ significantly. Often they copy one another but not always. Malta is the only EU nation that uses U.K - other than Ireland for obvious reasons, plugs.
Europe uses 3 different types C, E, F.
Also easier to make a near-flush to wall outlet. Still don’t like that they often spark when being connected. The Australian connector wins hands down on that by having an actual on off switch for every socket.
"The electricity could ground itself through you... and through your heart... which is bad..." - I love a bit of british understatement.
Ben D ..... I lived in the US their plugs are lethal not just dangerous but lethal, hail the British safety plug!
Unless you are Frankensteins monster in which case you love it
Itz Mattie yep I can agree they almost never lay facing horizontally and in the night the earthing prong is a b*tch to step on
George Job can you eli5 why our plugs are lethal? (Is it the older outlets putting live up?)
Metriod Boy Even if they did it would hurt no matter what
During WW2 I was evacuated with my mother to a place near Bradford where all the sockets were two pin and round being a nosey kid I stuck my finger in one, well it was finger sized wasn't it, apparently I was propelled across the room at great speed and no doubt Mum had to change my nappy. Now 77 years of age I still have the scar on my index finger it must have given me an interest in electricity because I became an aircraft electrician.
Wow that was nice to hear
Very cool Colin thanks for sharing
Wow, that's very interesting! Thanks for sharing!
🧢
@@nutsack-2009 2021-1945= 76
“I can’t imagine what’s worse than stepping on a plug in the middle of the night”
“A land mine”
Ignored Advice Productions the great james may
A lego
Is it tho? At least with a land mine there's a chance that you're immediately dead without pain.
@@Luca-iq4ev yes because you will only hurt your foot with the plug
A single block Lego piece is loads worse.
1:09 - With today's standard EU equipment you can't expose live metal by half plugging.
You either have an earth-less plug that has plastic neck on their pins (like UK ones)
or you have an earthed plug which has full metal pins, but the plug fills the whole socket so it won't allow you to touch metal when it makes contact.
This problem is so tiny, it is impossible to get significant damage from touching both wires with one hand.
@@Eimrine you only need to touch one wire (if it's the right one) to get shocked. If there wasn't that insulation on the contact pins it would be really dangerous
@@Kappa1060 you are wrong, 1 wire is never enough. Birds can sit on any bare wire.
@@Eimrine that's because they aren't grounded while sat on overhead cables, you probably are when poking your plugs.
@@Eimrine your body acts as the second wire, birds are unharmed because air insulates enough
Mums in Britain bragging about how smart their kids were since they got killed by an eletrical plug.
there are no 'moms' in Britain FFS !
we’re all born fully formed with bowler hats and umbrellas saying “wot wot!”
*mums
Wow no need for attack I ain’t French. I’m from Norway so my english ain’t too sturdy.
@@eoinosullivan5829 it's a joke. Mom is the American spelling of it, Mum is British.
British news: “ we lost a genius today, they were only a year old, they electrocuted themselves by plug”
mrawdog not them
😀
A true genius
reverse darwinism
itv
3:05 Did Iroh teach you nothing?? You’re supposed to channel it through your stomach for this very reason!
Most underrated comment on this video.
underrated comment af
i just watched that episode yesterday
Electricity always goes the way of least resistance, which in humans case is through the veins, and that’s why the heart is so vulnerable. Also because electricity screws up the frequency that your heart beats at and makes it lose control.
Aldozzy
In case you’re not familiar with the show, my comment is a joke referring to Avatar: The Last Airbender. I don’t mean it to be taken seriously. Honestly appreciate the knowledge about how it flows tho, thank you
Camera operator: I didn't see that coming!
Tom: no-one ever does...
Mate, this guy is a low-key comic genius and I love it!! 👌 I feel like Tom could do an excellent English-style humour sketch show that's both massively informative and hilarious.
Not a sketch show, but have you heard of Citation Needed? :P
Two drums and a cymbal fall off a cliff
Giggidy giggidy.....Giggidy Splat! Stick around!
There is sometimes when you do see it coming but the bathroom is still too far away.
I want him on QI
Oh man, I can only imagine the pain of stepping on one of those plugs in the middle of the night, in the dark.
It hurts more than lego
That's why as a British child, you learn quite young to leave things plugged in (we can turn the sockets off at the wall, so it's not necessarily going to start a fire). Mind you, if you step on a delicate wee Continental or American plug, it would probably come out worse than you and your foot will heal, but the plug will not.
my old phone landed face down on one from a height of 1m...
I'm 31 and I've never done it. Strangely, I've never even heard of anyone doing it. Things are either plugged in or out of the way.
Yes. you will be in pain for the very least an hour
The slack in the earth wire, I’d never realised that before. That’s a nice touch.
That's down to the person who fits the plug. It's not a built in feature. Also, a good plug fitter ("such as me), will make sure that the live is the one with the less slack. That way ensures that the appliance will stop working and not have power to it if the flex has been pulled. If the neutral is the one with the least slack, then the appliance will stop working but can still have power to it. That's a short answer!
@@sussertheoriginal Can confirm. I was never taught this, just the colours. To be part of the design, there would have to be something that you'd route the wire around that would collapse when the wires were pulled. Though some numpties would no doubt manage to defeat that.
It’s good wiring practice to make earth wire extra long.
@@sussertheoriginal More importantly, if the neutral pulls out of the plug while the live remains connected, the exposed neutral wire will likely be live.
So yes, Tom's missed that one - that the Live should be the shortest wire.
@@sussertheoriginal Also, nowadays many things don't have an earth wire - so the short Live wire is more important !
In France (and some other european countries) sockets are designed with a 15 mm recess to prevent electrocution. So partially plugged in plugs don't expose any pins.
@@sonacphotos Wait you mean right angle plugs? I would say at least for the "side-contact" euro countries that is the standard. The only plugs that do not do that are the 2 pole thin-style plugs.
The plugs here in Brazil also use the recessed pins design :)
@@EraYaN And those have become more common in appliances that don't need GFCI (atleast in my country)
They also surrender a lot
Also the lack of standardisation in European plugs means that sometimes a plug won't fit a socket (i.e. round plug and narrow socket)
You could also have mentioned the physical size and shape of the conductor pins. They offer a greater surface area in contact with the socket terminals over round pins. This reduces contact resistance and heating effect at higher currents.
Can confirm that UK plugs really really REALLY REALLY hurt when you stand on them AND YOU WILL.
You're less likely to tread on a US plug, but it's far worse if you do manage it. A proliferation of chargers makes it more likely in recent times. I once stepped backwards onto an american wall wart, a camera charger my brother imported. It actually cut through my skin and dug into the flesh, i was limping for days. It was like stepping on a knife.
Stepping on a British plug is about the same as treading on a lego brick in my opinion. Unpleasant, but nowhere near as bad as treading on a US plug. You'd have to really stamp on it to get it to peirce the skin because the pins are many times wider.
Ikr, as a Brit, I literally felt the pain when Tom described that part
Not as bad as standing on lego
@@edwardprince1576 I'm not sure, you may be right, but I suspect they're both just as painful
@@thegearknob7161 British plugs are that but 3 knives
There is also an on/off switch on the wall socket. So that even when an appliance is plugged in, you can cut the the electricity to it.
Wait...other countries don’t have this?
@@redberry4420 At least I don't see that in Europlugs as often as those UK plugs?
chungonion20 oh okay.
@@redberry4420 I've never seen it anywhere else but that doesn't mean that some other countries don't have it.
I know Denmark has this. Here in Sweden we don't
Tom's actually unscrewing that plug needlessly incorrectly, ironically missing out another safety feature... To open a plug, you just unscrew the single, largest, central screw. That's it. You don't need to unscrew the two smaller screws at the bottom... they're there to simply hold the base of the cable to prevent it from being pulled/yanked. Some plugs even have a plastic ratchet instead of the two screws to securely hold the base of the cable in situ. But damn the plugs do hurt like hell if you accidently step on one on the floor. It's something you only do once!
stepping on an upturned silicon chip is also painful ..😉
@Clau-chau Nicol 😂
If it wasn't a plug, it was a lego brick. They were (and still are) the domestic version of landmines.
Regarding leaving plugs on the floor to hurt you when you step on them: In the UK you don't need to do that because many sockets have switches so you just leave the device plugged in but switched off. Another UK safety feature.
I’m Australian, we have that too. Is that not a common thing in other places?
@@bigmanrui3503 nope , u just plug it in, im from the middle east and they use UK plugs here as well but we don't have switches on the outlets
The switch on the outlets. That's one feature I'm jealous about. I live in Sweden.
I thought all outlets had switches on them. It seems really unsafe for them to not have a switch. I remember when I was like 6 in school we were taught to turn off the switch even if nothing was plugged in because it could be dangerous. You turn it off then you take the plug out and you put the plug back in before turning it on.
@@bigmanrui3503 In the US you'd probably be accused of being a commie or something if you suggested it. The right in this country seems to think corporations have the divine right to do whatever they want. Its infuriating.
When I was 12 I opened up the base of my lava lamp to see what made it work. I saw two metal lumps, one was labeled "+" and the other was labeled "-". Clearly the + meant Put your right finger here, and the - meant Put your left finger here. So I did that. And now, 14 years later, I'm a heroin addict.
Electricity is a gateway drug. Don't do drugs above 120V.
This made me chuckle.
I did the same thing with a kind of lava lamp too, but I knew it would electrocute me....it did shock me but it didn't really shock me cuz I expected it anyway
xD
I licked pp3 batteries instead
That took a turn xD
A video about a plug hits 3.4m views. The internet is glorious
Maybe there are other videos with plugs, that have more views. You know?
Who hasn’t had problems with plugs
3.6
Dylan sky 😂
What a time to be alive!
They're also really handy for opening bottles of beer.
Ahhhh, the real reason... 😂
Lolol
Thin Blue Line don’t do that
Absolutely. 😂
I finally know what I can do with my british adapter plugs.
As an American... I do have to concede this one. I had the privilege of living in Ireland for a few years, and I did grow quite fond of the British plugs. The only thing I would also add is that the walls all have a switch on them as well! Instead of unplugging the cord when you are not using it you can just flip the socket off using the switch. I always thought that was quite cool
In the uk the great majority of the plugs have individual switches (with exception of some of the cheaper extension cords)
British sockets: *Has power button individually.*
British people: _"Let me just pull it out when not in use and lay it around the floor.."_
As a culture we're weirdly obsessed with unplugging stuff. Virtually any British home you go into is guaranteed to have at least one or two plugs just lying on the floor
@@MagisterMalleus Not in my household, things only get unplugged if there isn't enough sockets to plug everything in
That's true and even though I have never had one of these buttons fail on me, I never trust them especially when it comes to things like irons and fryers
that's because we don't have enough sockets for all our appliances, easily fixed with an extension adapter but they can take up a lot of space sometimes.
@@MagisterMalleus you telling me your wall sockets can't just be switched off?
Me: Doesn't use British plug
Tom Scott: So you have chosen death
😂😂
Me : Uses British plug since I was born but didn't know it's the same plug in my country as Britain
Tom Scott : You are using the best plug design out there
@@iEmoz98 chances are, you live in a Commonwealth country
@@iEmoz98 well, if nobody else is going to ask... i'm curious, what country do you live in? (I didn't know any other countries used them)
@@BrianC1664 Ireland uses em too mate 😂 Honestly, I always had this dumbass fascination with plugs😂 and our plugs have always been my favourite. I knew Ireland and Britian use em but where else🤔
Meanwhile, in the rest of the world: "So how will we make our plugs safer?" "lmao natural selection"
Here in malaysia we’ve git those same plugs, never realised that the brits invented it, well the more you know.
@@durktank5001 im also in malaysia
@@durktank5001 i mean the brits did invade malaysia not even a hundred years ago. There's a lot of standards in your country that follows the Brits
we use british plugs in cyprus too
We use the British plug in Kenya too.
The Schuko-plug design, that is common in most European countries, does have some advantages on its own. I.e. you can plug them in two directions... the earth grounding has even got two contacts! The 'live wire' issue is solved by making the plug outlet recessed (in a groove) - quite genius, I dare say
The bi-directionality is a really good thing in the Schuko plugs, yup. They are probably the second best design after the British plug.
@@dexterhaxxor what is the advantage of the british plug, from your point of view?
I think it is a bit bulky. I do not see a real advantage, honestly
@@marcuslang6153 the pins are square and bigger, so you get more contact area and less heating than round pins. The pin design also means that if a plug is accidentally pulled out, the earth is the last to disconnect.
Also, the cable comes out the underside of the plug, so you have to unplug by holding the plug case itself, you can't just pull on the cable to unplug a device, so there is no risk of damage to the cable - I know some modern schuko plugs have the cable go out at 90 degrees from the plug, but not all of them do yet.
The switches on our sockets are good too because it means you reduce the amount you plug and unplug, so plugs and sockets don't wear out as quickly.
The fuse is also good as a (very) last resort if you are in a house with old wiring that may not have modern RCD/RCBO/GFCI protection. Although Europeans don't allow ring circuits anymore so not as big a deal.
The Republic of Ireland uses UK plugs but only on radial circuits, not rings - I think that's the safest solution!
Schuko plugs were developed in 1925 and were established in the 1930s in Germany.
So it is a successful history of like 100 years of contempory safety equipment.
And since a combination of type E + F came on the market, these plugs can be used all over the European continent exept of Denmark and Switzerland.
@@marcuslang6153schuko plugs are inferior because they aren't grounded when connected to universal outlets common in hotels, which are flat and not recessed. UK plugs are always grounded when plugged into a universal outlet. Laptops for example WILL shock you if the charger uses schuko and you're using a universal outlet.
"You were just expected to wire the plug yourself, I learned how to do it in school." Tom stays teaching me how Britain used to be an absolute lawless frontier pre-Y2K
yea ik now its like you got a license for that butter knife
@Phil M I've yet to see any evidence of that "tells you not to drink the battery acid" thing. And it's also a myth that owners' manuals provided valve clearance adjustment information. That was always in the service manual (which you had to buy specially), not the owners' manual.
@Phil M and not to start forest fires
@@prva9347 well that has more to do with complexity rather than with culture innit
@@prva9347 The nice thing though is that cars have got more reliable and need less home maintenance. No more regapping the plugs and points every 6 months. Or trying to tune a carburettor. Or spraying WD-40 over the electrics when it wouldn't start on a cold damp morning. And back in the 1930s a lubrication chart was parodied; A. Put oil in here whenever it goes burr-burr, B. Put water in here whenever it goes buzz-buzz, C. Put grease in here whenever it goes squeak-squeak (about 50 locations!), D. Put [gearbox] oil in here whenever it goes wump-wump, E. Put petrol in here whenever it doesn't go at all.
Oh ye? Well does your plug look like a smiley face?
Danish plug gang represent
i mean atleast our plugs are smiling and friendly and they won't kill us. (Unless if we intentionally try anger them)
It's a surprised face if you turn it upside down
Hmmm. But yours looks like a surprised face? Hun??
GameFuMaster This is very random and very hilarious.
British plug pros:
Advanced security
Anti-baby electrocution
Unable to touch electricity through metal by putting it halfway
American plug pros:
Always look surprised
Good one, I understood what you meant
American plug pros:
Always look surprised
You wont step on it in the middle of the night
And US plugs are generally in multi-outlet plates (usually 2, sometimes 4, and often included in the same plates with wall switches) that don't take up an unreasonable amount of space.
If you accidentally leave an appliance on, the plug will automatically switch it off by falling out.
Also, impossible to trip over a American appliances cord.
°•°
I live in Zimbabwe and the house we moved into had South African type M sockets. For some reason, depending on who or when your house was built, you either get South African type M or British type G in this country. We switched all the sockets to British type G for their safety. This also means having a box of spare plugs and a screwdriver handy to rewire any new appliances that come with type M plugs.
Rhodesia*
@@phoneticalballsacknot anymore
Denmark here, we got all that, well except for the built in plug, and we don't have a risk of it landing in a way that will be painful to step on. We made that mistake already with lego!
"Der eeerrr et leeegooo laaaand!"
Unless you get one of those kinda bulky ones and it lands on the back with the pins facing upwards, but even then they're both rounded.
But the Danish plug doesn't have the insulated neutral/live so it's still possible to shock yourself if you get something in between a half in plug isn't it?
@@spudguy5 I live in Denmark. Some of my plugs have it, but most of them don't. Also, those shutters in the live and neutral that is in the danish sockets work differently than the British ones. In a danish socket, you can still put a screwdriver in there (I think, it's not like I've tried) as the shutters just do so that you have to push a little harder to get the plug fully in, and you have to hold the plug straight in order to get it in. So a baby would probably not be able to stick something in the socket as they have to push hard, but a kid can easily stick a screwdriver or something in there, I think.
@@spudguy5 You may get shocked, but 1) Danish sockets only make contact when the plug is almost entirely inserted, so you really have to make an effort to hit the sweet spot where you the pins are energized and the gab is wide enough that you can actually touch it with something conductive. Newer danish sockets also have a slight indentation around the plug making this even harder, and 2) it is mandatory in Denmark to have a high sensitive residual current and surge protector (HPFI) circuit breaker fitted to the main fuse board, so even if you do manage to get a brief shock, you'll likely be fine. These things have gotten seriously good over the years
"A really inventive baby"
They exist.
Suicidal*
Blinded same thing
I they get a shock you’ll be both proud and worried
I would have been that baby.
4:00 - Love the quick witty comments, even in the bloopers. _"I didn't see that coming"_ -- _"No one ever does"_ 😬
I loved the fact that each plug had a fuse when I lived in England. The power voltages are different than what I was used to in the US, and a few fuses blew on me and knowing about this made life a lot easier. And you didn't even mention that individual outlets have their own "On/Off" switch. To this day, that fact has struck me as genius.
Must be annoying to change the fuses and double check the switches if something is not working.
@@MorgorDre British plugs have generally had their safety supplemented with circuit breakers at the distribution board in the last 30 years. Consequently, fuses hardly ever blow these days because the circuit breaker cuts in much faster if there is an imbalance. The only time fuses blow these days is in older houses with older fuse boxes, or if someone has fitted the wrong rating of fuse in the plug.
No its stupid, why have an on off switch on a bloody socket?
@@gplusgplus2286 one use being you dont have to plug out the plug, just flick the switch. You just jelly!
@@gplusgplus2286 hahah you sir, are stupid!
Another great aspect of this design is that you can't unplug it by just pulling the wire, you have to pull the head of the plug instead. This ensures that over time the wire doesn't get damaged at the junction of the wire and plug, like most other plug types do.
or tripping over a wire doesn't yank it out, unlike the Yanks!
Thats also with SchuKo class 1.
Like most other plugs do? Meaning - in your mind, right? Because that doesn't happen, like, ever.
Meanwhile in America we're still arguing about ground up or ground down.
90 degree turns are usually good i would say but definitely not compact, and definitely exist with american plugs
But:
They are HUGE.
+Christoph Meier But: They are SAFE.
+Ann West safety is over rated
+Konverx Only by fools.
+Ann West You mean the kind of fools who can't properly use an electrical cord without electrocuting themselves?
+jogiff No, I mean the kind of fools who are incapable of empathy with the rest of the population. They are often known as psychopaths or sociopaths.
I was just waiting for him to pull out the *Sponsored By the UK Government*
*British* *Monarch*
@@MASB29 This video was brought to you by Queen Elizabeth II
**sponsored by the house of commons** is what you actually mean
Or Filmed and produced by the BBC
2:05
*There is always a (insert something)-shortage in Britain*
Right now it's an intelligence shortage
@@seancooper4058 And houses i guess.
@@seancooper4058 been going on for at least 3.5 years now.
I’d rather have a shortage of copper than school shootings and having to pay for healthcare
@@axis9038 not sure there were many school shootings when in USA when the UK had a shortage of copper and as I understand it, the price of healthcare was reasonable when we had the shortages of copper too, now we have plenty of copper, free healthcare and can count the number of mass shootings in the 20th and 21st centuries on my fingers.
I've actually seen a British plug that didn't have insulation on the live prongs. Of course, it was on an American made travel adapter designed to allow you to plug American appliances into British outlets.
What can I say, we yanks love to live dangerously.
I'll be damned before I let 'em government commies take my right to electrycute myself.
obviously american
Older ones did not have the insulation. I am old and still have a transformer from the 1960's with completely metal pins but I know not to stick my fingers behind it!
@@xenon53827 Before the metal pins were insulated, inserting the wires into the socket and then pushing in a plug to hold the wires in place was often convenient. Of course, historically, appliances were sold without plugs, and the buyer would need to fit their own. Naughty engineers would also use a single strand of copper wire to bridge a blown fuse.
This video was worth it for the comments. It's amazing how people become so patriotic about plugs...
Haha, I was thinking the same reading all these comments. As a Brit that is with the worlds best plugs. ;)
I've been scrolling and laughing, ahhh nationalism! I wish everyone on Earth could be proud of being a member of our species, Homo sapiens, and support each other. All technology that has ever been invented by a human has been inspired or influenced by the knowledge and inventions of other humans. Technology improves incrementally and sometimes in giant leaps, but it's all inspired by other people's ideas from other places, states, nations etc... I'm tired of tribal us/them thinking, and all the problems and bloodshed it leads to.
I have 0 sense of humour and this made me laugh out loud
Looks like you gained +1 point in your humor stat, Skezza!
Ayyy
Euro plugs are also half way insulated and the socket is recessed anyway so you can't touch live pins.
+rimmersbryggeri 2.5A Europlugs are partly insulated, but the larger 16A plugs used in the sockets which also accept Europlugs are not, This is a problem because there are still many non-recessed CEE 7/1 sockets in use (and still on sale) in some European countries which provide no protection from touching the live pins. (They also provide no earthing connection.)
Ok I have never seen a modern non earth plug with non insulated pins though and the old ones that are non insulated dont even fit in an earth jack. Sure there are unearthed jacks in houses build prior to 1980 or something like that here in sweden but as soon as some renovation is done by professionals they are replaced since it's illegal for them to re install unearthed except off course the special sockets that will onlly take the flat euro plug used on small appliances and lights but those are always recessed. I have seen none recessed sockets in spain and yeah that seemed a little half baked..
+rimmersbryggeri CEE 7/1 sockets are still common in the Netherlands and France. The whole family of European plugs which is referred to as types C, E and F were designed in a bygone age for a distribution system which no longer exists. It is a thoroughly compromised system because new safer designs were always compatible with what came before, thus ensuring that safety could never be assured.
fatallyflawed1947
Yeah in the old days the would insulate wires with tared linen too and if the fuses tripped alot sometimes replace them with something more solid. (nails, iron plugs etc) This had happened in a barn where my dad was working in the 70's which ended up burning down. The guy my dad worked for (recently bought the farm) was a smart guy though so he did it properly when he re built it.
Dangerous_CODE
Italians also drivew at motorway speeds while looking in the mirror.. A little excitement is good. ;) I don't think it's legal to install the none recessed pulgs even in italy anymore though.
We still get taught to wire a plug in GCSE Physics
Was taught not got taught!!
Only in some boards
+Emily Ross I'm also 20 and I did wiring in Physics at GCSE.
well it's not on the aqa spec, teachers don't really need to teach you how to wire a plug but you need to know the main parts of the plug.
+Emily Ross Grammar huh lucky.
I like the on off switch some plugs have. That allows you to easily turn off electronics that continue to use electricity when turned off.
When I was a toddler here in Michigan USA I liked to put my shoe strings into the outlets. My father got safety covers for the plugs and spent a lot of time installing them. My mother told me I had figured them out within an hour of dad finishing.
If ur worried about things using electricity when turned off just unplug it
@@ethanfisher9619 the switch is there so that you dont HAVE to unplug it (and you cant step on it then)
I really like your videos and they are usually very interresting - but this one is so wrong, it hurts :)
Let us debunk your list and compare it with the CEE-System, which almost any other country in europe uses - lets focus on the universal CEE 7/7-Plug:
1) IP44-Sockets are also Guarded and you cant plug in a CEE-7/7 plug into the socket - instead of earth pushing the safety away you need to push them both at the same time, if you shove in a screwdriver in just one hole it does not work eiter
2) the Pins on the CEE-7/7-Plug are also insulated half way up, you cannot touch them anymore as soon as they are plugged in
3) your explaination is pretty much wrong: the fuse inside is useless as a safety feature and has, as you explain, just historical reasons since the UK electric wiring uses a ring system instead of single lines whic are all fused at a central point and have an additional residual current circuit breaker - of course some devices are fused separately, but there is no use to fuse the plug itself - just a waste of resources, since the cables on lots of devices are interchangeable (for example computers, printers, fridges ... - they pretty much all use the C13/C14-System) therefore UK devices which offer additional safety do not use just a little melting fuse, the use miniature circuit breakers in each plug or device. to be on the safe side, you need to test those regularly - but who does that, if he does not know the device has one? if you have just one in your home, it is way more paractical and therefore safer
4) the slack in the earth wire has nothing (directly) to do with the plug - this is, in fact, a common rule in lots of applications were you have something earthed - this wire has to be longer to be pulled out last _if_ the strain relief fails - therefore this also Applys to the CEE-System and even the device side where the cable might be hardwired
Additional features which makes the CEE-System superior:
1) The Typ F Socket, which can accept the CEE-7/7-Plug has 2 Pins for earth, not just one - both are connected before the live pins even enters the holes
2) due to the ring topology of the wiring in your home, you can save resources by using a smaller wire crosssection but on the other hand you have no way to determine if the ring is poproperly closed - since there is not always general fuse (because the system relies on one fuse per plug) there is always the danger of burning your house down, if something in the ring fails and draws too much power, this cannot happen on CEE-Systems because every wire has to be dimensioned properly to the fuse it is connected to - for example if you use 2,5mm² wire, you need to put a 16 A fuse in the circuit
3) the plug itself has a tight fit in the socket and is not just held there in place by the pins, so it is safer and cannot be pulled out by accident
And of course dere are disadvantages both systems share:
In the past, the plugs where made form different materials, for example they used phenol formaldehyde resins for the casing - if you use modern thermo- oder duroplastics with similar physical properties, you have an unneccesarly bulky plug - also the manufacturing of the pin shape makes it way more expensive the the manufacturing process of the CEE-System-Plugs with round pins, this therefore both could be smaller and easier to manufacture
This leaves one single advantage over the CEE-System you have not even mention: CEE-7/7 does not feature a polarity protection - which the UK plug in fact does - you might suggest, that this does not even matter in AC circuits, but it is a problem with faulty devices - for example if you have a lamp with an edison socket and change your lightbulb - you can never know if the outer thread of the socket is neutral or the live wire/phase - this is a problem if the switch on such device does only disconnect one of the wires to shut off the light and not both
No, NO, more nonsense! Only some European countries require shutters, Germany is on of those that does not. The CEE 7/7 plug DOES NOT have sleeved pins! you are right about Tom's explanation of the fuse though, he does not understand it either. The fuse is there for the specific purpose of ensuring adequate protection of the flexible cord between plug and appliance, nothing else. It is NOT a result of the ring final circuit, although sadly many Brits connect the two things. It does not matter that you can move a cord between different appliances because the fuse is installed by the manufacturer to match the cord, not the appliance it will be used with. Ensuring that in the event of the cord becoming disconnected the earth is last to break is a specific requirement (clause 11.8) of the BS 1363 standard.
Your claim that the Schuko system is safer because it has two side clips, not a single pin, is nonsense because the Schuko is designed to also fit non-earthed CEE 7/1 sockets, there are NO non-earthed BS 1363 sockets! A ring which becomes open is not great, but is no more likely than a poor connection in a radial circuit. The probability of an actual problem being caused in a ring is extremely low, there no evvidence to suggest otherwise. Also, consider that even if the ring is broken, all sockets still have a solid connection back through one side or the other of the ring. A poor connection in a radial means that each socket after the problem is drawing current through that fault with the consequent fire risk due to arcing! A BS 1363 plug has a very secure connection to the socket because of the pin geometry. BS 1363 plugs never come out by accident (unlike CEE 7/16 plugs which are very prone to that).
How is it wrong
+fusesafety EU System id definitely better
I clicked the 'Read more.' button, was not expecting that!
vf fa
There is no such thing as an "EU System" of plugs and sockets, you clearly have no idea what you are talking about!
An elderly now ex-colleague of mine discovered he had leukemia after standing on a plug in the night. He went to the doctor once he noticed that it wasn't really healing. Thanks to that he got treatment and survived. He is currently enjoying retirement.
negative to eventual positive :-)
That's the reason we I randomly assault people: Radical preventive care. :D
@@ViolentFEAR
name kinda checks out
@@beepboopily6285 OH MY GOD ITS JESUS
All of those safety features are present in modern European plugs, except for the internal fuse. Outlets are required to have a "well" to make sure the pins cannot be touched once they are in contact with the socket.
Also, on Schuko outlets, the grounding will always be in contact with the plug when inserting, it can never happen you manage to partially insert the plug without grounding. The ring circuit is inherently unsafer than separately fuzed circuits.
@@Djrepsaj exactly. People are being really dumb about the fuse. Its like wearing 2 condoms. If your house doesnt have aids (ring circuit) why wear a second one.
(I know wearing 2 is actually worse)
@@OcarinaOfVali i totally agree with you.
Standard British pride for thinking they invented the wheel too..
@@OcarinaOfVali I disagree. It's rather clunky to have to make everything safe for 13 A that can be plugged into an outlet connected to a circuit protected by a 13 A fuse. So it makes sens to have a fuse in the plug that fits the cabling of the thing you're plugging in.
In Australia, only a licensed electrician can do any electrical work. No wiring plugs, no fiddling with power outlets. My physics teacher used to say "one flash and you're ash." When Tom said that up until 1992 people had to wire their own plugs, well... my trousers changed colour too.
We use 110 volt for normal appliances here in the U.S. If you get shocked you'll definitely feel it but you won't die. I've been shocked while doing electrical work and came out unharmed.
And in Australia we all respect that law 😂😂.
@@Firebirds4ever UK and Aus both use 220+ volt.
220V AC is the European Standard. 240 V AC was the Australian and New Zealand standard, but since 2000, some Australian States have dropped their mains voltage to 230v AC . The intention is to make Australian manufactured products aligned with its main trading partners.
I've wired plugs up in a few countries - Australia, UK and Europe, but from my experience, the Australia/New Zealand plug is the best. The UK fused plug would never be permitted there.
The problem with such low voltage is that because of half the voltage, you need twice as much current to do the same work. That means thicker and more expensive and heavier cable. There are ways to stop you from getting electrocuted and many countries with voltages above 200v have what they called "Earth Leakage Circuit Breaker". which shuts off power if the current flowing out on one wire isn't balanced by the current flowing back. From my experience, it works very well.
Stepping on plugs is for amateurs, try laughing so hard that you fall off your bed with your bare back straight onto the pins of a plug.
A (very large) friend of mine stepped on one with his full weight, and it went most of the way through his foot....still hasn't healed properly.
@@njones420 fookin ell
Said from previous experience?
O_o
At least you two got a cool scar.
Oh Toby. Oh no no no Toby
I just cut off the plug and stick the individual wires into the socket
How stupid can you get?
How gullible can you be? I have a bridge for sale in Brooklyn for you....
maple How?
Good job.
Done that many of times. Back in the day we would have maybe 3 or 4 plugs but many more appliances so we would just swap them round to wedge the bare wires into the socket with. I got shocked a couple of times but I'm still here to write this so no harm done.
i always struggled with getting a screw driver into the slots. all i have to do is turn the plug upside down. thank you i can now stick my screw driver in.
Spencer Rees thank you gamer. I’ll just use an American plug
This is really clever design :D
but one "comfort" feature I'd say is missing, in the EU you can plug the plug upside down.
So if you want to power something above the power outlet you don't need to twist the cable around.
perfectly designed to inflict pain on a barefoot individual.
samithedood legos be damned
+Kyle Hickey LEGO*
Hell, look at that huge plug though. I've stepped on many lego barefoot before, and yes it hurts, but god damn that huge plug sticking STRAIGHT up if you stomped on that full force unexpectedly while walking around in the dark... that'd go beyond a lego, sorry.
At an european plug its impossible to touch anything,when its plugged in halfway
True that, the thin ones are isolated down to half length, and the Schukos only fit into well-shaped sockets so by the time it's out of the well, it's already disconnected.
Jonas until recently this was an eu plug
It's also nice that both pins have to be inserted at the same time, or else the shutters won't open. With the rare exeption of your physics teacher single-handedly shoving two cables in a socket to demonstrate transformers.
Jonas *a European
@@idonotlikeboats9328 *aN eu plug
The greatest plug design in the world.... .. until you stand on one.....😆😱
mistral55 not wrong. It will make you swear every time
i mean that's just a common problem for all plug designs of the world, dont leave yall plugs laying around like that
@@spootymaniacs not us ones
mistral55
Stand on a plug and feel pain for a couple of hours; touch a live wire/plug and you will never feel pain again!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@@largespaghetti5215 i mean if you ever leave your phone adapter just laying around..
The insulation part is by far the best part of this. As far as shudders, in the US they are called "Tamper Resistant" receptacles and are now the standard electrical code for new installs. I do like that the US plug is far more compact. The UK plugs are SO GIANT that makes things super awkward.
Those massive plug prongs look like they could easily handle 50 amps. Imagine having an oven / range plug to connect your usb / phone charger :)
There's this hip new thing going on where the top prong is retractable, plugs can be about half the size now
The UK ones are also 220V, not 110V
@@phiksit thats why the uk plugs need a fuse since you can plug your normal plugs in a 700watt power outlet lmfao
US plugs are so crap though, the prongs are more flimsy and bend easily, they are more likely to fall out of the outlet.
You forgot to mention every UK plug has individual switch, so you don’t need to pull the plug to switch off the device.
Not true - there are unswitched sockets in many UK houses.
@@johnenfield1930 Very rare tho
@@jackharkin5387 Not true. Quite common.
@@Sam-yr5ih Swear I've only seen a few and they're usually in really old Victorian style houses
@@jackharkin5387 Depends on what part of England you live in I suppose. Rarer in some parts when compared to others.
I love how people are offended
THAT THEIR PLUGS ARE WORSE
its gold been laughing like really
Some have worse plugs, yes, but the German Schuko plug is objectively better than the British plug. - Tom Scott even showed some examples where the British plug fails, such as if you insert it upside down ... but a Schuko plug can be inserted in both directions without any issue. A Schuko socket has a smarter child protection system; the British plug simply requires you to insert a thing in the earth-hole, and you get access to the socket. But the Schuko plug require you to insert pins in both holes at once, with equal pressure, which is something not even an adult can do reliable. A Schuko socket is even adult safe!
Liggliluff You can’t normally insert the British plugs upside down. It was a flaw in the design of that extension cord, not the plug. There is usually a much larger distance from the top of the plus to the end of the plastic making it impossible to insert upside down
Liggliluff still doesn’t matter because Germany lost both world wars
@@Liggliluff I don't think that applies to every German power socket, you can insert a phase tester in most sockets in our household. Many people buy child protection adapters, if they have children.
And don't mention the war! :P
I don't know how you would get a shock from an EU plug by plugging it halfway in. Only the tips are metal and you can't get a finger in there once the plug is far enough in to touch the contacts inside.
And every argument here work for the EU plug too?
@@mentinementine310 except about the shutters over the live av neutral as in a EU plug you just put in one thing per hole and it opens.
The old sockets in my parents'house just have open holes where a kid might put something in and get an electric shock. The more recent ones have shutters that open only if you put something into both holes at the same time.
The German cee 7/3 is one of the safer European sockets it's true apart from the lack of switches and flex protecting fuse (the breaker protects the house wiring, but the fuse protects the flex, a 0.5mm^2 flex with a 16A mcb is not sufficiently protected, one with a 3A fuse in the plug is)
The CEE 7/1 socket on the other hand is not well protected at all, the 7/5 is nearly as good as the 7/3 however
What happens if a child picks up a conductive object thin enough to poke in at the metal prong?
Zap.
I was taught how to wire a plug in 2013, but I wasn't told why it was a skill many Brits had. I had to watch this video to figure that out, for some reason?
I've actually stepped on an upturned plug - it actually stuck in my foot, and in the shock, I was like "Huh. I'm a socket." Theeen the pain, and blood, and screaming came.
Ouch...
Same happened with my sister. Ha your comment brings back "good" memories.
Correction:
The EU plug pins are, here in Germany at least, also covered in plastic half way through and the plug itself inserts into the socket so that you can’t even see any pins at all.
Same in Poland.
The earthless type is insulated, the earthed ones are a bit larger and usually have to go in ~2 cm, though they are a bit of a hazard in the ~0,5cm deep earthless sockets.
And it's less likely to impale your feet with them.
Ever noticed, that remarks like "The best in the world" are only used by UK and US people? That's because they live in their own buttle and hardly get out to see the rest of the world.
@@switcher656 I mean in this case at least, there is a compelling argument
"Brown is the colour your trousers will go" sir I salute you. I also enjoyed all the glorious technical content.
You description of the plug and how many British houses are a single circuit wired actually explains several stories I've come across where one shorted plug knocks out all the lights. That's less likely to happen in the US because we generally take 240v off the power line and split up at 120v for several fused circuits.
Now all the babies know. Thank youuu
Road to 100 subs with one video. If you get to call us babies can I call you "person at death's door"?
Interpretation is a funny thing, from my perspective it sounded more like a snarky comment about how youngsters now know something, but perhaps it might be a joke, I don't really know anymore whether it's an insult or a joke.
Yeldur thank you for your opinion
Thank you for yours?
+Yeldur I think he meant actual babies.
Lego or Brittish Plug?
Which is more painful?
Plug
plug.
Knife
British plug shaped Lego
I am a masochist
The German ones used all over Europe are better and safer actually, and here is why:
CONTACT:
As you have just shown, it is possible to put the plug upside down, which makes contact possible.
Also this kind of system to open and close the protection is known to break in many cases, either rendering your outlet unusable or unsafe.
Which is why European plugs are symetrical, have very tiny holes and don't have moving parts. The sequrity works differently, and it requires bot points to be pressed at the same time.
Also the European wall plug is designed to be used with a special lock, that is dirt cheap, or even comes free with the plugs, that insures that only with a special plastic key can someone open the lock. Great for outside plugs, and keys.
INSULATION:
European sockets are actually kind of a hole, about 1,5 cm inwards, which means that when full sockets are half pluged, no metalic parts actually show up. Whith half sockets, the same insulation is applied in European plugs too.
Not to mention that, by design, European plugs can be used outside in any weather.
CONSTRUCTION:
There is a reason we say things are "screwed'. Screws are a terrible idea in plugs, which is why European plugs don't have any. All the systems are fused in place with many layers of plastic, which means its impossible to disasseble, and adds to safety.
European plugs have another advantage. As you said, Brittish households have a common circuit for all sockets, not all Europeans do that though. Every room here has its own circuit with its very own fuse which are all located on a central panel, which means that if an appliance breaks the circuit of one room, the others operate fine, and you your socket, and plug are good as new.
Which is why all of the above are common in all of Europe, and its only the Earth point that is different in some countries.
ADDED BONUS:
Generally, European outlets come in 2 sizes, the full ones, which are 40% smaller than yours, and the half one which are TINY :O . So smaller plugs here can acomodate more devices. Half outlets are also designed in a way that full ones cant get in. Not to mention that they never, by design, land with their points up...
I don't think there is any kind of pride in the plug. But the fact that half of the world uses the german plug or some variation of it, even back in the day when the UK was the exporting power of the world, proves that it is, by far I would say, a better design.
The absolute nonsense of this post is summed up by the stupid claim at the end that: "half of the world uses the german plug or some variation of it" Well, if we take the ten largest countries by population only two of them use a national standard based on the German plug! Those ten countries represent 56% of the world's population, and subtracting the populations of the two exceptions (Russia and Indonesia) still leaves over 50% of the world population in the remaining eight! And that is before we consider the remaining 240 countries, about 50 of which use the British plug described, about 45 use the American plug, about 30 use the old round-pin British plug, and about 20 the same plug as China.
You should not talk about "European plugs" or "European Outlets"" which are terms which describe many different plugs, including the one described in this video (Britain is part of Europe after all). Of the 28 EU countries in the EU, 18 use the German “Schuko” socket, 4 use the French socket, and 4 use the BS 1363 type. Denmark and Italy both have unique types, with several variations of each! French plugs will not fit into non-French sockets, German plugs will not fit into non-German sockets etc. There is also a hybrid plug which will fit into both French and German sockets. An attempt was made to introduce some form of interchangeability by creating the Europlug (EN 50075) but this is an unearthed plug for use with low current (
Are we seriously going to argue about a fucking wall plug?
Every device that I carry with me has worked in plugs in Germany, France, Greece, Turkey, Italy, Spain, Denmark and Sweden. I know it's technically not a common standard but its close to the point of me not giving a fuck when going abroad, which is not the case for you.
Regards.
***** But, for the reasons given in my response to TheThOdOr1s above, they are most definitely not similar regarding safety, it is a matter of fact, not opinion. Being able to reverse line and neutral is just another safety shortcoming.
***** umad
***** This isn't an insult dicks are awesome
Thanks, as a canadian who lived 2 years in UK I understand a bit more why you still have those enormous plug!
Non-Brit here, wondering why you guys have all these plugs laying about on the floor everywhere, that you're stepping on them at night in the dark.
The outlets also have a switch, so you can leave them always plugged in and flip the switch to use, instead of leaving the plugs on the floor
@@carwyn3691 All things plugged in will bleed some energy. Called "standby" electricity loss because it's so often associated with electronics in standby or idle mode, it's also known as "phantom" or "vampire" electricity (for obvious reasons). Even turned off, many appliances keep drawing power
@@neamhdhlisteanach6720 Yup.
I know right??!
@@neamhdhlisteanach6720 no, this is wrong, if you just turn your TV off with the remote and do nothing at the wall socket, then yes it will draw 'standby' power, but if you switch it off at the wall then the circuit is broken, it draws no power, it is the same as taking the plug out of the socket.
(The only exception being in lightning storms, lightning strikes that get in to the power lines have high enough voltage to jump the little gap in the circuit caused by the switch in the off position in the socket, so it can still damage your electrical items if left plugged in and switch off, it would also blow the fuse in the plug.)
Wait schools teaching something used in everyday life to prepare students for adulthood... WHAT IS THIS TRICKERY?!
I know right, it surprise me too
Tech ed.
Maths? English?
except no one wires a plug anymore.
Kai Blahnik
>implying school never taught you that
>Implying subjects like math and science do not prepare you for anything
Go back to school and pay attention next time
Actually European type F plug is also that safe and not have the lego-effect.
You can check it here: www.worldstandards.eu/electricity/plugs-and-sockets/
+Péter Baán I kind of like the type K, it looks like a smiley face :D
Though I always thought the American type B looks like a man who is utterly horrified.
***** C is a bit.. well I don't consider it very safe, but sometimes comes handy when you don't need that much of safety, or ground loop.
However I don't consider safe the fuse in the plug either. How dum idea it is? I know the historical reasons but such an intelligent person he is and yet consider this plug the safest option when a child could simply grap a screwdriver and burn the house or worse. No one can do that with the C and F type with a generic every day use screwdriver.
I know, I'm kind of a technician when it comes to electronics. :)
www.worldstandards.eu/electricity/plugs-and-sockets/
+Péter Baán I thought the safest of all of them was the Type-N
1:50... that is really amazing to me. All appliances I've ever seen (unless they were self-powered by batteries) have plugs on them. I've never even heard of having to buy your own plug. (Not in the UK)
light fixtures, stove hoods, heaters and dishwashers frequently come without a plug in the US; I guess they are expected to be hardwired
Just wanted to let y’all know my English teacher just put this video in class, so congratulations for that Tom
What was the lesson about? The one about Abso****inglutely would seem to be a better pick!
@@ishoottheyscore8970 it was about technical terms and plugs
U say y'all
You're English teaching is failing you!! 😜😜
@@shotsmac "you are English teacher is failing you" also nothing wrong with saying "y'all"
@@hunchily haha your*
I realised it when I clicked send. 🤦♂️😂🤦♂️
Touche good sir!! 😂
What you happened to left out is that European plugs (EDIT: Notice the plural. This applies to most types of plugs in the EU. It's not a type of a plug) are deeps as a damn valley and they disappear in the socket BEFORE the pins could touch live. Also, a huge pro for UK plugs is that they are polarized. Furthermore, in normal European plugs you have the same earth-is-the-last-to-pull-out rule and it works just as well. Most of the time it is indeed the longest for the same exact reason. And the fuse? If you run something like 95% of where the fuse will blow, you will have a nice little heating element that can melt the plug. Bigclive had a video on one of those.
Firstly, there is no such thing as a "European plug"! There are MANY European plugs of which the British plug is one. I expect that when you say that "European plugs are deep as a damn valley" what you are actually referring to is the German Schuko socket (CEE 7/3), or the French socket (CEE 7/5), but that is to ignore the other very common socket into which both German and French plugs are designed to fit, the CEE 7/1 unearthed socket which, apart from providing NO earth connection, does NOT have a full recess, and certainly does NOT prevent touching the live pins of a partially inserted plug! There are still many, many millions of CEE 7/1 sockets installed in many mainland European countries, and they are still available to buy new!
As for the nonsense of overheating fuses, the BS 1363-1 plug standard, and the BS 1361 fuse standard together ensure that this cannot happen in compliant products. Every plug model sold in Britain is subject to rigorous type testing against the standard before it is granted an approval licence. Non-approved products are illegal.
That's because CEE 7/1 is just handy simple and cheap :)
xzaz2
And fundamentally dangerous!
CEE 7/1 is a socket, not a plug. It is still in common use in many European countries. Although most CEE 7/1 sockets on the market today are as deeply recessed as a CEE 7/3 or CEE 7/5 socket, this has only been true in the last few years. The vast majorit of installed CEE 7/1 sockets have only very shallow recesses and provide no protection against touching the pins.
fusesafety
I'v never erver heard anyone complain about that socket / plug. May be they use common sense in the rest of the EU?
Thought I knew how to wire a plug seeing as I too remember the days of "plug not included". In fairness I did teach myself at the age of about 6 and was responsible for wiring every new appliance, but...
...never knew about leaving the earth longer than needed for the connection.
50 year old and still learning.
Thanks Scott.
Every new plug comes with a piece of cardboard slipped over the pins with a diagram showing exactly the proper length of each conductor and how much outer and inner insulation to strip. Also, a coloured picture of where to connect each wire. Do not ignore it or throw it away!
The plug that Tom shows is the usual, cheap version with screw terminals; the stranded wires need to have a ferrule ('bootlace end') or they will become loose over time causing overheating and damage to the socket. BTW, my tip is to remove all three terminals from the plug before wiring them. I recommend the far superior MK plug with large wrap-around terminals!
Our family house had the old round pin sockets (BS546: 15A, 5A, 2A) until I was ~13 years old so I have only been dealing with the BS1363 plugs for sixty years.
These plugs are massive. The europlug is nice and slim. More plugs fit to a similar sized extension cord.
The electricity, can ground through you. And your heart... Wich is bad.
-Tom scott
what?
you obviously did not heed the lesson of the brown wire.
Which
my heart is firmly grounded
I classic British humour and under exaggeration
Well, you can not touch the live parts while plugging in a European-Schuko-plug. That's impossible, as your fingers needed to be like 2mm thin and very flexible for doing so.
You don't have screwdrivers, forks or nails over there?
Not 2mm thin ones which bend perfectly ;) Google images for "european wall socket" and you'll understand
WTH your sockets are really small and weird the only thing I see fitting in there are tooth picks and if someone makes metal tooth picks imagine what American kids would do to themselves cause of that
Used a European plug and touched the prongs when I was smaller. I got shocked. This is a lie.
@@philip_bray using european plugs for 17+ years and never got shocked.
It took until 1992 for everything to get plugs!?!? What the hell?
Europe is in the dark ages
In Britain!
In the 1960s UK houses had a number of different socket designs, before this pattern became the norm. So appliances came with bare wires so you could fit the style of plug you required. (They could have demanded appliances came fitted with one of these plugs a lot earlier than 19922, though. They were standard long before then.)
KnightRaymund virtually everything came with a plug. In 1992 it was made a legal requirement.
I brought a wall fan this year and it didnt had a plug
Can confirm as well! In Bangladesh, probably due to British influence from a long time ago, we still have so maaanyyy different plugs, and also these British ones. Indeed these are the safest ones. Then when I went to UK and saw these, I found out that these are British haha.
A thing about most european sockets: they're either recessed, meaning that you can't access the pins on the plugs when you've inserted them. Or the prongs only has exposed metal at the very tips, so once it's actually inserted deep enough to make contact, only the plastic part of the prongs are accessible.
You can however still poke a small piece of metal into them and give yourself a hairstyle that went out of fashion in the 90's.
@@cgi2002 if you live with a kid you can put small coverings into your outlets that requires a twisting motion and the cost around half a Euro. I'd say that is a small price to pay for the compact and rotationally symmetrical formfactor.
@@antonf.9278 not just about the form tho. 2 pin plugs don't have an earth, making them inherently less safe.
Would also point out many having a recessed socket, the socket itself has to be recessed deeper into the wall itself.
Also you can't have a "recessed" extension lead or multi adaptor, which if I'm honest probably account for more than half the sockets in my house.
@@cgi2002 *2 pin plugs don't have an earth, making them inherently less safe.*
These are only used on devices where earthing is not necessary, they aren't inherently less safe, unless they are used in wrong (unlawfull) way.
*Would also point out many having a recessed socket, the socket itself has to be recessed deeper into the wall itself.*
Yes and no. Yes, those that are more or less equal to the wall recess into the wall, however those that can't recess into the wall have a recess outwards (or better a "box" outwards with the recess in it), the latter just looks more ugly and might be more annoying for furniture, but you never use this unless absolutely necessary or you don't give a f*ck.
*Also you can't have a "recessed" extension lead or multi adaptor*
Really? All my extention leads or multi adaptors have this recess, so far I know this is standard (at least where I live). I have never known a non-recessed socket (wall mounted or otherwise).
@@MDP1702 the earth not been needed arguement isn't reasonable. An earth is never needed until it is, and when it is, a 2pin plug can't have one. For example a toaster with some metal on the outside, in the UK should that metal case somehow become live (lose wire inside for example), the earth deals with the danger. A 2pin plug has no way to deal with this danger, the case remains live and should you touch it, you become the Earth. This is a case of "in normal operation it doesn't need to be earthed", but the earth exists for abnormal operation, it's just an extra safety step that has saved countless lives.
As for the recess, you said exactly what I meant. To male the plug level with the wall, the socket must now stick out from the wall rather than been flush with it.
The extention lead is the same, a UK extention lead can be about 3cm deep (a tiny bit deeper than the pins on the plug itself). To have a recess yours needs to be thicker.
I would note however the shape of your plug and the shape of ours means that this difference overall is actually not important. The extention lead may be 3cm deep, but the plug is also about 3cm deep (unless it's a transformer plug then its way bigger), so 6cm. Yours the recess itself makes the original lead 4-5cm deep but 2cm of that is overlapping with the plug itself, so all told they are about the same depth when a plug is in the socket.
I love it! This video perfectly shows that the job of an engineer is not to make something that works when used properly, it's to make something that still works when the person using it has no idea what they are doing hahaha
"Never underestimate the ingenuity of an idiot."
--Engineering Proverb
Which is the actual application of Murphy's law (when designing something, assume that everything that can go wrong will happen, and every mistake will be made)
To reference Murphy's law a bit more obliquely, the problem wasn't that some idiot plugged the toaster in backwards, it's that some idiot _designed_ a toaster that _could_ be plugged in backwards.
That’s cars in a nutshell!
‘Engineered for wreckless people’
@@NightOfTheLiving8bit More like wreckful people
As an American, I think you're correct on the safety front. Only, it is a massive plug!
+Jacksirrom it's a massive plug for a massive plug
+Jacksirrom
I'll have to agree, from a electrician' point if view it's awesomemly designed. From a mechanical point of view it's jsut a tad too big :/
So overall I'd give it an A- (Safety is much moore important than convinience)
+Freakschwimmer Nah, safety isn that important. The dumb kids just electrocute themselves to death, natural selection.
+Jacksirrom How big is too big? It fits in your hand, so I'd say it's just the right size.
...Sorry, I just got a bit of deja vu for some reason.
+Jacksirrom As a user of the British 13 amp plug and socket, I am also a big fan of it from the safety and usability point of view. The fused plug ring-main system also means we have easy access to LOTS of power points in the home. But you are right. The 13 amp plug-top is bulky, especially when not plugged in... (stored).
I also wish more electrical goods could be designed with an understanding that being stored is what a LOT of electrical goods spend MOST time doing....('phone chargers, hairdryers, etc). I am asking for the items to be shaped more like a reel, so the cable can be wrapped up, and for somewhere to be provided for holding the end, with or without a plug.
This SHOULD be boring... but sir, by nature, you made it... REALLY INFORMATIVE, literally, and super-interesting.
Excellent video, bit of general ignorance re. the reason that pre-war British plugs and current European ones aren't fused though: The purpose of the fuse is to prevent the flex on the appliance from melting/bursting into flames.
It is true that radials are usually fused lower than ring-mains but, because they generally run multiple sockets, they are generally still much higher than the safe rating of a flex for, say, a lamp. A british plug fuse can be as low as 3A, while a European radial could be 16A.
In fairness to our continental neighbours though, the French/Germans worked out the importance of separating fingers and pins before we did and achieved this by sinking their plugs into recesses so you couldn't get your fingers onto the pins until they'd been withdrawn (hence the common name SchuKo or Schutz-Kontakt, meaning shielded contact).
+fred karno - I couldn't speak for all of Continental Europe, but I've never seen a fuse lower than 16A here in the Netherlands, and with the exception of 21A, which is used in some older domestic setups, nearly all houses use solely 16A fuses.
+fred karno - I have no idea what this means. What is a flex, a radial, and a ring-main?
A flex is the wire from the plug to the appliance. It's often much lower rated cable than the circuit (so a table lamp might have a cable rated for just 3 amps). In principle, there could be a fault where a high enough current was passed through the flexible cable for it to overheat but which would not be high enough for the circuit breaker to trip. They are called a "flex" as they are flexible cables as opposed to the semi-rigid ones used for fixed house wiring.
A ring circuit is one where a wire starts at the distribution board and then loops through a number of outlets before returning to the distribution board. As each outlet has two routes back to the distribution board and it avoids duplicating a lot of radial wiring it means higher currents can be carried and less wire used. It's really only in the UK were ring circuits are widely used, and a typical house will have at least two, each rated at 32 amps. Whilst more economical too install, they are more demanding to test and validate so are not favoured by some.
It's true that the fuse would stop the wire melting, but I really don't think that's the purpose: the metal case of an appliance is usually connected to ground, so that if a live wire comes loose internally and contacts the case it DOES send a large current to ground. Which then blows your fuse. The idea is: make the failure mode break the fuse, rather than potentially injuring someone.
The European plugs are just as safe, if not safer. The outlet is always sunken so by the time the pins can contact, there is no way to jam your finger in there. For the UK plugs the insulation could come off due to damage, this isn't possible when the entire plug is used as insulation.
You also can't put a screwdriver in because you need equal pressure on both sides to open the little covers.
The fuse in the plug would be redundant because there already are fuses for everything in the main fusebox. I would even say it is safer this way because you won't have to screw open plugs when a fuse burns. People could become lazy and not close the plug properly afterwards, or they could put in a bad fuse that allows more current or they could just connect it with copper wire if there are no fuses lying around. In the fusebox it is just a matter of flipping the switch back up, you really can't do it wrong.
Also you can connect plugs upside down when there is no ground needed. Super handy when trying to fit bulky plugs.
The covers are only implemented in newer sockets. I live in south-eastern Europe, and we have open sockets with no protection all over.
Nick Nirus Well that is an issue, but not fundamental to the design. Go to any sufficiently old building and you'll find bad electrical safety.
Nick Nirus
As you have english socket with bad security ^^ too.
Niosus Fair point. I suppose modern British and European plugs both have their ups and downs, then.
Often you don't have to open the plug to change the fuse: it is common for it to be mounted in a carrier that pops out of the face of the plug. Then you replace the fuse in the carrier and push it back in again. Now that all appliances are supplied with a plug already fitted the plug is often moulded on and sealed so the pop out fuse is the only way to replace it.
The breaker in the fuse box is rated at the maximum capacity of the circuit to protect the mains wiring. The fuse in the plug is rated appropriately for the device, so in most cases will be a 3 or 5 amp fuse with 13 amp fuses used only for devices that actually need them. So both are useful but for different reasons.
We use those plugs here in Malaysia too, never thought they were from Britain.
Edit: damn this got more likes than I expected. Colonialism has brought us together lmao.
You're welcome
Former UK colony. I come from HK and we use that kind of plug too =]
Yep, it's a relic from colonialism. Luckily it's the good kind of relic
U can see them in Singapore too
@@ppy4poon becuz also a former UK colony :)
One thing I've noticed is that the pins on British plugs appear to be more than double the thickness of the ones we have in Australia, its really easy to bend ours and even break them off if you step on one, I even saw someone partway plug a socket in then jam his finger in there to straiten the pin...
The european plugs are not level, they are inside a hole about 1cm deep, so no live voltage is ever exposed
Plus they're reversible
this video is over 7 years old
@@notsquash3980 that's relevant? Its not like we have changed plugs in the meantime
@@MisterCOM you couldve done idk i live in bri'ish
the european design we use in germany is the best one in my opinion, it grants all the same safety features but takes less space, almost all plugs are waterproof, you can use it upside down, usually its easier to pull it out, its very unlikely you step on a pin of the plug because they are rounded, devices that dont use "earth" because theyre in protection class 2 can also be plugged into safety shutters. should I continue?
Meanwhile in the white house: "We have the best plugs, believe me, they're tremendous"
It happens all the time that people come up to me and say: Sir Thank You Sir for keeping our tremendous plugs! Happens all the time!
"Our plugs are so great that I am wearing one right now. It's amazing."
Probably the plugliest plugs ever ... maybe even pluglier.
also:
Two spoons come out of the wall with wire around them to feed a minifridge filled with carbonater drinks that have electrolytes.
@Robert Brown why?
You need a pretty strong baby to open the spring loaded covers in European plugs...
You need a baby who is sufficiently adept at pressing two suitably sized objects with equal force into the two holes, so yes, the method often used in Europe is a good one (although not as good as the alternative British method, which Tom did not describe, which is also operated by simultaneous insertion of Line and Neutral, but only works when the earth pin is also in place!) The problem with shutters in mainland Europe is that they are a relatively recent introduction, and not all countries (eg Germany) require their use! The majority of sockets in mainland Europe do NOT have shutters, whereas every single BS 1363 socket ever made does!
Ann West
Of course, but it is still a thing. I am not saying the video is bs, just a thought.
True, I hate the new power strips that are mandatory since a couple years because it sometimes really is a pain to get your plug in, especially when the power strip is a bit out of reach (and I'm not a baby :D)
They also tend to bend the pins in.
I was told my my parents when I was two years old, some how got a hold of my father's tools and completely dissemble an electrical outlet. Shutters would not have stopped me.
Good points. I like Type F because the outlet is recessed in. At no point is the electric prongs exposed because the prongs are the same distance as the recess. It also avoids moving parts on the outlet. Or having to insulate the prongs.