Complete Guide on how to replace Wheel Hub Assembly on Nissan Juke

This is the step by step process on how to replace/remove wheel hub assembly (wheel bearing) on most nissan cars - Juke,Altima,Leaf,Sentra,Maxima and Kicks and most modern car as well.
It is consist of these 10 simple steps:
1.Uninstall tire
2.Remove axle nut
3.Remove brake caliper
4.Remove the rotor
5.Remove the wheel hub
6.Install the new wheel hub
7.Reinstall the axle nut
8.Reinstall rotor
9.Reinstall brake caliper
10.Reinstall the tire
If you find this video helpful, please like,share and consider subscribing.Thank you for watching!

[@gerardomenesesjr3418]

Great job without removing ball joint or strut bolts 🤩🤩🤩

[@Wanderrap]

Thanks 👍

[@Javaman92]

A VERY well done video. One of the best I have seen. Good job describing everything.

[@Wanderrap]

Appreciate the feedback!

[@anthonycadogan3734]

Video is so good, I subscribed, thank you

[@Wanderrap]

Thank you!Glad it helps

[@kelvinhill5381]

Thanks friend, you have helped me more than you know. I followed your video and got it done smoothly. I erred and put anti seize on the 4 hub bolts but had it torqued on before I realized. Hopefully it will stay together.

[@Wanderrap]

Glad it helped!thanks for watching!

[@ifancysongs]

Nice one, good details and a just the right speed. Thank you.

[@Wanderrap]

Glad it was helpful!Thanks for watching!

[@jeremyjohnson8425]

Great video 👌🏽💯 straight to the point and simple

[@Wanderrap]

Thanks for watching!

[@danielvalentinnielsen6388]

THX for video.

[@Wanderrap]

You're welcome.Thanks for watching!

[@tiborbreining8369]

The dust shield was on backwards though. Great video, but don’t be afraid to say or write on screen that you actually had to take it off and put it back again. Otherwise people may get frustrated. Great video though for real! Thank you 😊

[@Wanderrap]

I put a note saying i installed it backwards lol.Thanks for the feedback

[@pnv8477]

Good job. Keep up the good work. A lot of people are learning from this!

[@Wanderrap]

Thank you!Appreciate the feedback👍🏻

[@markkunes9711]

Nicely explained and good clear video

[@Wanderrap]

Appreciate the feedback!

[@AppInventorCode]

Solid video. Great job

[@Wanderrap]

Appreciate it!

[@chrisbonati8657]

Good video, but other than your noted mistake the brake pads are upside down.

[@Wanderrap]

It’s not gonna fit if it’s upside down

[@dggrossman7217]

What size is the axle nut? 30mm, 32mm, 28mm? It would be good to know before starting in case have to go to store to buy the correct socket, no?

[@Wanderrap]

It’s in the video.You need 32mm socket to remove it

[@tonynguyen3144]

Thank you for your video

[@Wanderrap]

Thanks for watching!

[@jamescalbert4958]

Having trouble getting a socket on the 4 hub bolts. Any suggestions?

[@Wanderrap]

Have you tried the shallow one?

[@bshef3424]

front end squeak squeak squeak squeak squeak squeak every morning wifey drives down road (nissan Leaf).....curious if this is most likely same issue?
Can't imagine what this will cost from local shop (sigh)

[@bshef3424]

.... Just back from mechanic.... They resurfaced front rotors ($200) ... No more squeak squeak squeak 😀👍

[@Wanderrap]

@@bshef3424 you should just buy rotors rather than resurfaced them.Much cheaper😊

[@arashsalar]

🌟🌟🌟🌟🌟

[@Wanderrap]

Thanks for watching!

[@jamalholland7185]

Your impact wrench is it 1/2 inch 20v?

[@Wanderrap]

Yes it’s 1/2 inch

[@kobustheron8972]

This is not true. There is no bolt to torgue bearing

[@heinrichorilla9914]

What do you mean? Haha

[@Wanderrap]

What?