So I've watched probably 20 lean-to shed videos and this is the first that recognized that there should be flashing between the house and the shed. I hadn't even remotely considered that. I'm really impressed. Well done!
That is nice but you really needed to use treated lumber on the bottom against the concrete and you need to put some vents up near the top of the walls.
It gets plenty of airflow from around the doors. They are there to A) keep people and animals out and B) to keep weather off the compressors. Last summer we broke 100°F a few times and never had any issues with overheating. The compressors have a fan on the motor to move air. They seem to move enough for them to stay within operating temp.
Was there a reason you didn't just lower rafters down about an inch so you could have had the shething and shingles under the existing drip edge of the wall. Would have saved buying flashing and tar 🤷♂️
I was just trying to have a good slope to the roof. I wasn't really concerned with lining things up with the shop siding, probably gonna change out the old wood siding for something that seals better.
I'm sorry for the late reply. It was alot is the short of it. I started with few bags I had left over from a fencing job, and then it ended with the cars rear suspension screaming for death till I got home with if I remeber 10 more 60lbs bags. So I really don't remember without scrubbing through alot of footage.
So I've watched probably 20 lean-to shed videos and this is the first that recognized that there should be flashing between the house and the shed. I hadn't even remotely considered that. I'm really impressed. Well done!
I’d gladly pay 40 bucks any day for that! Thanks for the vid.
Damn good tutorial video sir!👍
That is nice but you really needed to use treated lumber on the bottom against the concrete and you need to put some vents up near the top of the walls.
Hellz to the YEA!! Pt 2, LET'S GO!!
How does the air get in... Assuming you are consuming a decent volume of air, then you need some airflow into the compressor and for cooling? No?
It gets plenty of airflow from around the doors. They are there to A) keep people and animals out and B) to keep weather off the compressors. Last summer we broke 100°F a few times and never had any issues with overheating. The compressors have a fan on the motor to move air. They seem to move enough for them to stay within operating temp.
Was there a reason you didn't just lower rafters down about an inch so you could have had the shething and shingles under the existing drip edge of the wall. Would have saved buying flashing and tar 🤷♂️
I was just trying to have a good slope to the roof. I wasn't really concerned with lining things up with the shop siding, probably gonna change out the old wood siding for something that seals better.
What type of siding did u use?
Looks great!!!
I used the cheapest 4x8 sheets that Home Depot had at the time. I'm not sure of the brand, but going on a year now and it's all holding up well.
How much cement did u use
I'm sorry for the late reply. It was alot is the short of it. I started with few bags I had left over from a fencing job, and then it ended with the cars rear suspension screaming for death till I got home with if I remeber 10 more 60lbs bags. So I really don't remember without scrubbing through alot of footage.