and set the fan at the back and the one in the air cooler the other way around to push air in instead of exausting the PSU warm air, which is also passing through the RAM
The graphics card is blocking the molex sockets on the power supply except for one row, the ones being used. It shouldn't be a problem. All the components are designed to take some heat 🔥 I have built some small builds. And from what I found is the part that fails the most from heat in any build is the wireless. If it heats up too much it can drop the connection. I put little heat sinks on the shielding now.
ATX was always whey to go for me, but ever since I so this case G200 I got abscessed with it. My Lian li Air mini which I still have was awesome, everything was working superb, but I couldn't help myself to build in this G200 my new Mini ITX and!!!! not going to lie, I'm disappointed and regretful. I got G200, B650E-I, 7950X run on 105 ECO mode, NH-U12A chromax and the new (2024)1000W Corsair SFX. There is literally no airflow throughout the case other than air being moved a bit by my NH-U12A chromax and the temps are no whey to my liking. Everything chokes. TBH. the case build quality is not even close to Lian li Air mini. G200 panels are too thin, and because top and front panels are integrated, you have no access to top. The handle......not my favorite I wish they made without it and if you remove it there are 2 holes that don't look good. Going back to my Lian li Air mini.
Like me I prefer desktops but not the size , so smaller pcs make more sense to me when you can have basically the same hardware these days in smaller builds
probably could have been better if the PSU was the other way around to vent out through the front panel mesh and the back fan pulled air in instead of exhausting it out
for everyone wondering: after some research i found that the case is called the KXRORS G200
The G200 has a mesh panel instead of the glass though
@@Stigmaru THIS ONE IS SHINY SNAKE G200 GLASS MODEL. THEY HAVE 2 TYPE, MESH AND GLASS
Thank you
@@2bigbalIs you’re welcome
@@kyira88Can you please link because I can't find the one with glass panel anywhere?
Absolutely gorgeous SFF build! Well done.
The Ram is Asgard Valkyrie DDR5 for those who are asking
thanks! due to selective blindness i was unable to read the label on the box by myself
请制作ak500 lcd diy方法视频！
这个定制的屏幕哪里可以买到？
how do you only have 1k subs. ur production value is insane
Where could you find those lcd gifs?
That build is super clean!
혹시 쿨러 디스플레이는 어디서 구매가 가능할까요?
Wtf ak500 with lcd. Where did you buy that?
China
1. assguard memory for protection
2. why u need 800w psu when the system tops to 400w ?
3.sfx psu would have looked cooler
How did you get one with a glass window instead of a mesh? 你是如何得到一个带有玻璃窗而不是网格的窗的？
Where can I find the G200 with the glass panel? All I can search is the ones with mesh. I know they are better for air flow but this is way too clean
i love it when the hot air from my cpu blows directly into my psu
pretty sure its the other way around, the air is flowing from the front to the back. not from the back to the front.
How did you made the diy lcd screen for the cpu cooler? It looks fantastic!
since this creator lives in china, i guess the product only sell in China.
@@Abulibuli the cpu cooler i believe is AK500 digital with lcd screen, the cover plate is 3d print custom.
edit, the lcd screen also custom.
oh! cool!@@Nam-mj6op
@@Nam-mj6op n e 3d print , e o original cortado
請問hdd機械硬碟可以裝嗎
2024 and still cant find some of this stuff
有可能找到这样的玻璃外壳吗？我订购了这个箱子，但它没有玻璃。
How did you guys do the custom lcd on the ak400 air cooler? Is there an attachment I can buy?
its iin the desc brah
Is it possible to find such a case with glass? I ordered this case but it came without glass.
Hello , what is your portable monitor?
What fan is that? It's so cool
Where can the lcd scene on the cooler be purchased from?
AK500S
美!! 不過散熱還是最大問題XD 顯卡應該隨便都上80度
How much will it cost for build like this??
Hello, what monitor is that? great build!
That seems like ROG Strix XG17AHPE, rog portable monitor, I remember those tripod.
@@ArchAzrael79 Thanks bro!
How do you get a customized AK400 Digital?
這樣的組合，價格落在多少呢？請問
大概一萬起跳
the tempered glass touching cpu cooler or not?
You should have made the PSU face the other way, towards the front mesh.
and set the fan at the back and the one in the air cooler the other way around to push air in instead of exausting the PSU warm air, which is also passing through the RAM
The graphics card is blocking the molex sockets on the power supply except for one row, the ones being used. It shouldn't be a problem. All the components are designed to take some heat 🔥 I have built some small builds. And from what I found is the part that fails the most from heat in any build is the wireless. If it heats up too much it can drop the connection. I put little heat sinks on the shielding now.
@@batemanjo9 airflow ?
Do you think there is space for an intake fan below the psu if i use an SFX psu?
Is the motherboard mini-ITX?
processor without load of 46 degrees? there are definitely errors in the direction of the air or fans.
ATX was always whey to go for me, but ever since I so this case G200 I got abscessed with it. My Lian li Air mini which I still have was awesome, everything was working superb, but I couldn't help myself to build in this G200 my new Mini ITX and!!!! not going to lie, I'm disappointed and regretful. I got G200, B650E-I, 7950X run on 105 ECO mode, NH-U12A chromax and the new (2024)1000W Corsair SFX. There is literally no airflow throughout the case other than air being moved a bit by my NH-U12A chromax and the temps are no whey to my liking. Everything chokes. TBH. the case build quality is not even close to Lian li Air mini. G200 panels are too thin, and because top and front panels are integrated, you have no access to top. The handle......not my favorite I wish they made without it and if you remove it there are 2 holes that don't look good. Going back to my Lian li Air mini.
What Is the name of the cpu holder (the black one Pierce)
Guide DIY LCD temp please..
gpu cooling ak500wh not lcd. you mod lcd ?
very clean build
i love it
Nice build but 0 airflow unfortunately.
850w psu for pc who consume maximum 400w?(i think even lower)
Can you link the resources you used to do that mod on the cooler?
Why did you put both screw to hold up the GPU? Ruined the whole build for me.
Wonder how much the total build costs
More tiny, more costly
about 2300 dollars US ... I fainted after finding the MB/l7 and GPU costs...
Wow with lcd animation
Just perfect. I've been hooked this PC since the day I saw it. Only thing I want is a little bit powerful GPU.
MSI makes a dual fan RTX 4070 ti that will fit.
you can buy IEC white cables BTW
Does anyone know what case this is? can only find the mesh variant
Gigabyte C-200
这个散热器是买不到的吗
Ak500 digital white
850W PSU for RTX4060? no sense.
why not?
Temp?
Nice pc build, loved it... ❤❤❤❤
請問UP
白色螢幕是甚麼牌子的?
【淘宝】m.tb.cn/h.5TkZ5Ez?tk=EJrpWb1YRP1 CZ0001 「VK瓦尔基利民圆屏免驱一体式水冷显示器散热器温控屏幕视频240360」
点击链接直接打开 或者 淘宝搜索直接打开
어떻게 쿨러에 diy 했나여?
1:33 crooked
That cpu cooler is sick
How can I find out these monitors?
Look on the internet????
but what should I search @@JimNichols
what are these parts plz tell me
CPU：i7 13700K散片
主板：MPG Z790i EDGE WIFI 刀锋
显卡：七彩虹 COLORFIRE RTX4060橘影橙8G
内存：阿斯加特 女武神 DDR5 6400 16*2
硬盘：西数SN850X 4T
电源：九州风神PX850G WH
散热：九州风神AK500白色 DIY LCD屏幕
机箱：闪鳞G200玻璃白色款
such a sexy build! is this Case? Kxrors S300 ?
Shiny Snake G200
amazing, can you share lockscreen wallpaper i love it !
너무 이쁘네요 잘보고 갑니다
Perfect 🤩🤩👍👍
100*c cpu 120*c gpu
What case is that? Its nice :D
KXRORS G200
amazing build! but i dont understand the practicality of these portable builds, when you can just get a laptop
Like me I prefer desktops but not the size , so smaller pcs make more sense to me when you can have basically the same hardware these days in smaller builds
Thanks for sharing ❤
for better thermals change the cpu fan direction so that they intake air from the rear instead of expelling it
Bad advice. Air outflow from hot heat pipes is better for thermal. Air intake from CPU heat pipes with no exhaust fan would do the opposite of cooling
Now if could only figure out how to get Colorfire Cat mobo and Case n GPU to Alaska lol nice vid :)
ahhh. Perfect
Видеокарта будет смльно грется
You forgot to turn on the power supply :D
13700k is too hot CPU for this case And at least a 240mm water cooler is needed
probably could have been better if the PSU was the other way around to vent out through the front panel mesh and the back fan pulled air in instead of exhausting it out
1:15 it's i5-13400
@@golfjoong8066 good eye
Now good luck telling that to my mother o.O
Why this case so like deepcool ch160?
I would prefer m-atx rather than itx and also amd not intel.
Then you should video a build like this but with those components...
@@JimNicholsoh you pretty clever boy ...
🥰🥰🥰🥰
这是炫富！
the bomb is planted
Ostras! q maravilla.
详细配置都没有看到
视频简介有的
AWESOME! Great video!
where can i find this DIY LCD for Deepcool AK500 ?
perfect !