Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip 1. Go to a blind you want to program and select the desired channel on your remote 2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades. 3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test. I didn’t try how to favorite a position but so far I have the desired settings.
On my model, select the channel you want to program, then push the red button by the motor marked "P", then push the button on the back of the remote marked "C".
Alright folks this works - to program/ pair your remote and shades, open the battery covers of your remote and you should find C and L buttons on the chip
1. Go to a blind you want to program and select the desired channel on your remote
2. Click the program button, wait for the shades to go up and down and then you’ll start to hear 5-6 beeps and within this time frame click C on the back of your remote and it should be paired. Test and repeat for other shades.
3. To make height adjustments, select the desired channel and click L. The shade should go up and down. First we set the bottom - so click down button on the remote and click stop once the shade has almost reached the bottom. Now when you click down button the shade should move in small movements towards down and when you feel it’s right click on C which confirms your bottom setting. Similarly now press the up button and stop and adjust by clicking the up button multiple times till you feel it’s right height and click C. This should come out of the program mode so that you can test.
I didn’t try how to favorite a position but so far I have the desired settings.
On my model, select the channel you want to program, then push the red button by the motor marked "P", then push the button on the back of the remote marked "C".
Doesnt program