EASY FIX : Zanussi ZDT41 Dishwasher Basket Not Pulling Out Easily

Hi, this video shows you how to easily fix a dishwasher which has a bottom basket which is very hard to pull out because of faulty wheels. You can buy repalcement wheels very cheaply on eBay and Amazon. The wheels in the video where purchased from Amazon with next day free Prime delivery for £6.45 for all 8 wheels. The wheels are 40mm in diameter and the dishwasher is a Zanussi ZDT41.
Many thanks Vince.

[@dziggy3004]

I have a newer BOSCH. It has real bad tolerances between three critical components: (1) the rack wheel-spacing between the left and right sides, (2) the track-spacing on the open door, and (3) the track spacing inside the dishwasher (which is 3/16" larger than the door's, and is further not perfectly parallel, with the track actually widening by an additional 1/8" towards the rear. Which is to say that if the rack is not laying perfectly centered on the track, it's wheels can dip down inside the track (especially with a loaded rack) and BIND the full rack! FUN (and becoming a PAIN!) Since the rack axles aren't easily bent on our model w/out breaking spot-welds (and one can't use heat due to the special surface-coating on the rack's wires) -- the best workaround is to get WIDER wheels (at least for 1-side of the rack). The wheels have 3/8"-flat surfaces, but need an additional 1/8" to 3/16" width (between the two sides, or all on one side). I'm planning on manufacturing my own "WIDER"-wheels using a lathe, out of Teflon material.

[@DrewVAL1x]

2:02 👀

[@octav1o141]

The beginning was so funny with the plates shaking