How to Replace Headlight Assembly 10-12 Nissan Altima
Вставка
- Опубліковано 13 гру 2024
- Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
1A Auto shows you how to repair, install, fix, change or replace the broken, damaged, cracked, faded, cloudy, or chipped headlights. This video is applicable to the 10, 11, 12 Nissan Altima
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oacG/1A...
• Phillips Head Screwdriver 1aau.to/oacG/1A...
• 10mm Socket 1aau.to/oSw/1AX...
• 13mm Socket 1aau.to/oY4/1AX...
• 7mm Socket 1aau.to/oSw/1AX...
• Trim Tool Set 1aau.to/onQ/1AX...
• Ratchet 1aau.to/oaep/1A...
• Gloves 1aau.to/odx/1AX...
• Rust Penetrant
• Safety Glasses 1aau.to/oae/1AX...
For More Info visit us at 1aau.to/h/bBL/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Great, detailed video. Banged it out in a little over an hour. For those people without a lift, there's no need for one. I just took out the 6 Phillips's head screws underneath and left the splash shield attached. It's flexible enough to allow the bumper cover to sit on the ground with no problem. Saves a bunch of time too. I used a 1A auto parts part for the assembly. It fit perfectly and came with bulbs installed. Couldn't have done it without this video. Thanks.
Or just also you can just use ramps.
Thank you for your video. I am not a mechanic, and this helped me so much to remove my bumper and install 2 brand new headlight assemblies on my 2014 Altima. Took me 2 hours. Thanks!
This is so simple. All i need now is that 10mm... been driving my wreck for months aww Jeeez.. Thank you for clearly showing the process with quality recordings. Peace
+M Gonzalez Thanks for checking us out. 1aauto.com
Thank you so much for sharing.
Today I had to do this exact work on my Honda.
I followed your directions and walla!!!!
Done in about 20 minutes!!!.
This video saved me a ton of headaches. Wife bumped a guard rail and busted the headlight into a million pieces. Didn't know where to start or end lol. Great vid
+Stephen Carr Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
This is a very detailed video. I am thankful that you started with the driver side assembly. It showed me that the battery needs to be removed on the driver's side. 👍🏾👍🏾👍🏾
Great step by step video! More detailed than the ones I've seen so far. One of the things i wanted to make sure of is where does the yellow H11 and Gray H9 belong to and this video addresses it. I bought headlights that are interchangeable between H11 and H9.
+Jaime Pichardo Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I just ordered and installed the set on my 2013 Altima coupe great product and fast shipping .I was able to remove the top plastic bumper fasteners completely then the top 10mm bolts of the assembly and the screw by the fender ,one more 10mm bolt on the side of the housing with an right angle power ratchet. This allowed me to carefully shimmy the bumper away from the assembly just enough to get them out and disconnected and put in the reverse order. I did this one side at a time and never had to remove any of the under side splash guard fasteners. just a tip for a 2013 coupe not sure if it would apply for the sedans. Total time :50 minutes to complete.
+Gitagrip Thank you for your order and feedback! We'd love to hear about your experience. Here's a link to leave us a review on Google: goo.gl/i5JFNY We are sure this tip will help out others with this repair too!
Muy buen video ,muhas gracias por todo lo que nos presentastes en el video...
Great video, he's so detailed a d patient. Im a female, with his instructions, I could probably do this myself lol.
+Anita Baker Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Very helpful video, thanks 🙏
+Andrew Paul Thank you! We are happy we could help.
I have a 2011 altima coupe 2.5s. Can I install an assembly without the projector lenses?
+Dion High Eagle It depends on what your vehicle came with. Thanks for the question.
When is it necessary to replace the entire piece versus just the bulb inside?
YES, the 2013 thru 2018 headlight assemblies have been the subject of a class action lawsuit in which Nissan settled and its due to the chrome delamination encircling the bulbs. It flakes off and makes visibility at night very difficult.
Good video if I needed a headlight assembly replacement. But I just need a low-beam headlight bulb replacement.
All that for headlight serious
It really isn't that bad. You have to take the front bumper off quite a few cars to get to the lights.
If this is too much for anyone I feel bad for them.
Thank You!
+Joe Smo Thanks for checking us out!
Why those mounting bolts are rusted? Even the transmission pan mounting bolts are rusted?
+Pioneer Lover Most of the vehicles we work on are from the Northeast so rust is sometimes a problem. Thanks for checking us out! 1AAuto.com
Beautiful got it..
I was with you all the way up until the zip-strips. These can't be depended upon to last. They become brittle and fail eventually. Don't get me wrong, I've used them myself for light duty purposes such as cable or wire retention. But never for structural support. What happened to the 7 mm bolts?
Other than this, I thought your video was great and very helpful. Please consider editing, or even remaking, this video to include a proper and safe wrap up.
Thanks for the informative video. The end result is a deal breaker for me though. If I were a customer or a shop owner, I would be very dissatisfied with the use of zip-strips in place of bolts or clips. ~ Peace
So I have to lift my car up to Change my headlight damn wtf I can’t do all that 😂 I just wana fix my light
Manufacturers overcomplicate things by design
Man, Nissan sure makes it a pain. Great vid but for your average person, it’s probably not simple, it will be tedious.
I watched it
+GARY ADAMS Thanks for checking us out. 1aauto.com
Why the fuck do we have to take off the bumper
Absolutely no reason to spray the bolts
You dont have to remove your bumper to change your headlight bulbs. Theres a video here on youtube showing you how. You just use the wheel well.
This is the entire assembly, not just the bulbs.
Aint no gotdamn way i have to remove to whole bumper just to replace my light bulb....
THIS IS THE ENTIRE ASSEMBLY... EINSTEIN .
Are these steps necessary if you're only replacing the low beam head bulbs? Nissan is really ridiculous in their ways to build these kind of cars. It's not Mechanic's friendly. Ridiculous design.
+Pioneer Lover You may be able to access the hi-beam bulb easier, but it would be hard to say when you should stop. Thanks for checking us out! 1AAuto.com
it's not just Nissan, I had a 2007 Buick Lucerne and a 2013 CTS Sedan and both required the the bumper cover removed! I too the CTS to chevy dealer for (1) one headlight bulb replacement: bulb $6.00, Labor $101.00!
Do you live in Miami? I need to change my front lights to led, can you tell me where to go to see it thanks...
+T.J Martin Thanks for checking us out! We do not have any physical store fronts or auto shops. You should be able to go to a local body shop and they can point you in the right direction locally. 1AAuto.com
I was with you all the way up until the zip-strips. These can't be depended upon to last. They become brittle and fail eventually. Don't get me wrong, I've used them myself for light duty purposes such as cable or wire retention. But never for structural support. What happened to the 7 mm bolts?
Other than this, I thought your video was great and very helpful. Please consider editing, or even remaking, this video to include a proper and safe wrap up.
Thanks for the informative video. The end result is a deal breaker for me though. If I were a customer or a shop owner, I would be very dissatisfied with the use of zip-strips in place of bolts or clips. ~ Peace