How to Remove Bumper 06-12 Nissan Altima

For More Info visit us at: 1aau.to/h/bBQ/
In the video, 1A Auto shows how to remove and replace a dented, rusty or damaged front bumper. The video is applicable to the 06, 07, 08, 09, 10, 11, 12 Nissan Altima
This process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oq5/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oq5/1AXAA00013
• 10mm Socket 1aau.to/oor/1AXAA00017
• 7mm Socket 1aau.to/oor/1AXAA00017
• Trim Tool Set 1aau.to/ofc/1AXXX00006
• Ratchet 1aau.to/osw/1AXAA00016
Subscribe: / @1aauto
Check out our playlist:
Nissan Altima 2006-2012 4th Gen: • Nissan Altima 2007-201...
For More Info visit us at 1aau.to/h/bBQ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*

[@KarlFTI]

One of the clearest videos I have seen. Nice job!

[@1AAuto]

+KarlFTI Thanks for checking us out! 1AAuto.com

[@dmascorro76]

Harbor Freight sells a very inexpensive and very useful tool for those push pin fasteners.

[@dhmu5tang71]

If you are Replacing the bumper... adding the chrome center piece to the new one would also be helpful.. But otherwise very well explained....

[@wshyarramadhan7777]

A very professional team

[@omrahn8906]

Do you have a video on how to change the radiator on a 2008 Nissan Altima 4-cylinder?

[@KiranKumarBostonian]

Thanks for the detailed video.

[@1AAuto]

+Kiran Kumar Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto

[@ESnipetheartist]

Very helpful. Thanks for uploading

[@cicada3312]

can i install a maxima bumber instead of this altima one

[@24KGoldbackGorilla]

Does the bumper need removed in order to remove the grille?

[@FromTheHood2TheWoods]

Thank you

[@yaboyyjuu7477]

Where can i buy the push pins?

[@user-ef3eh4kt2h]

how long does it take to remove and replace a front bumper?

[@leh3827]

Great video. Thanks.

[@1AAuto]

+LE H Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

[@Aaron-M-Simpson]

Do you have a video for the rear bumper?

[@1AAuto]

+Aaron Simpson We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-1AAuto-c

[@olenaerhardt7725]

Very good film, thank you. If the front bumper energy absorber got damaged, but not much (one of those rectangulars, which come out from the absorber to attach it to the reinforcement bar, came apart and lost), can that bumper be repaired or it is better to buy a new one. Is it essential for safety?

[@mafisto5O]

Your car will protect you but your bumper will protect your car

[@bscott651]

Thanks

[@1AAuto]

+B Scott Thanks for checking us out! 1AAuto.com

[@gabrielalcaraz6556]

9:33 what’s that called ?

[@gabrielalcaraz6556]

The little square pieces

[@reventon4547]

5:54 Audio Warning!
Remove headset to avoid bleeding out of ears.

[@Jahroable]

Do you have a video for the front fender?

[@1AAuto]

+Jahroable We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com