@@Devo1987 Hello I'm not to sure which power supply you need. When you buy the DVR it comes already with cords needed to connect hard drive and also has cord to power up the DVR hope this helps if not please let me know so I can further assist.
Estimado. Muchísimas gracias por tu video. Me sirvió mucho. Saludos desde Chile Dear. Thank you so much for the video. It was very help for me. Greetings from Chile
Can somebody tell me if my annke dvr hard drive is posible bad? after power outage stop recording. Dvr came with 1TB and is not recording anymore....or how to factory reset it. Thanks in advance for your help
Hello Robert once I powered everything on and was going through settings it did format the HDD. I have 4 cameras on my unit. So far yes 1 Tb has been enough for my use. I'm only concerned to have to replay video if need be so far have not had any need b's. Hope this helps.
Not sure on that but you could always just get a 12 volt fan and put in if needed. I have been running my DVR since this video was posted and have not had any issues with it at all.
Installing a hard drive is easy, but, does the motherboard recognize the hd and give you the option to activate and/or install the Annke operating system? Annke site customer service is never any help. Thanks....BW
Once you install hard drive the dvr does recognize it. As far as adding operating system to the hard drive there would not be any reason for that as hard drive is just storage. Hope this helps.
Yep..no problem once hd installed. I was concerned the operating system would have to be installed (like a computer), but apparently it's within the motherboard. Thanks for reply...
True western Digital Purple is a dedicated HDD for surveilance use because it has a better write than read speed but Caviar Blue works just as well and as the poster above says its 7200rpm vs 5400rpm. Remember the video is for a low load home surveilance application with a couple of cameras not a heavy duty 8+ camera industrial or workplace installation.
Go to system menu then maintenance. Then go to select factory default. It should then go to reboot and you can start all over again. If this does not work you can go to support@annke.com I hope this helps.
Thank you very much for this fantastic and clear video, that is much appreciated!
Your so very welcome
@@garagebuilds5469 link for power supply adapter ?
@@Devo1987 let me get that
@@Devo1987 Hello I'm not to sure which power supply you need. When you buy the DVR it comes already with cords needed to connect hard drive and also has cord to power up the DVR hope this helps if not please let me know so I can further assist.
Thank you so much from Ross On Wye Hereford for your help and video,I bought the exact hard drive...
Glad I was able to help
Awesome Video Thank you
Thank you for watching.
Excellent, very clear video, was very helpful for me, THANKS !!!!!!!
Thank you for the comment glad it helped.
Estimado. Muchísimas gracias por tu video. Me sirvió mucho.
Saludos desde Chile
Dear. Thank you so much for the video. It was very help for me.
Greetings from Chile
I’m glad you enjoyed it..
Can somebody tell me if my annke dvr hard drive is posible bad? after power outage stop recording. Dvr came with 1TB and is not recording anymore....or how to factory reset it.
Thanks in advance for your help
Do you know the name of the sata power cable you have I can’t find it anywhere and it’s the one I need
The cable I used came with the hard drive
Can you send the link for hard drive please
this is the one I used Western Digital 1TB WD Blue PC Internal Hard Drive HDD - 7200 RPM, SATA 6 Gb/s, 64 MB Cache, 3.5" - WD10EZEX
Thank you, how do you stop the beeping? Ours started when he took the hard drive out.
Have you gone into the settings ? There should be an option for this.
@@garagebuilds5469 He fixed it somehow, thank you
Great video.
Did you have to format the disk?
Hiw many cameras do u have?....is 1TB enough storage space?
Hello Robert once I powered everything on and was going through settings it did format the HDD. I have 4 cameras on my unit. So far yes 1 Tb has been enough for my use. I'm only concerned to have to replay video if need be so far have not had any need b's. Hope this helps.
whats the MAX size for the hard drive??? and can you install any SSD or HDD?
also can it be any brand name hard drive?
@@Dedicated2WendyWilliams i believe its 6Tb and a branded name 3.5" SATA (WD, Seagate pipeline etc) HDD is a best.
@@Dedicated2WendyWilliams Yes majority of brands do work with this application.
@@Dedicated2WendyWilliams I apologize I had lost access to this channel.
How come your unit doesn't have an internal coolin fan?
Not sure on that but you could always just get a 12 volt fan and put in if needed. I have been running my DVR since this video was posted and have not had any issues with it at all.
Installing a hard drive is easy, but, does the motherboard recognize the hd and give you the option to activate and/or install the Annke operating system? Annke site customer service is never any help. Thanks....BW
Once you install hard drive the dvr does recognize it. As far as adding operating system to the hard drive there would not be any reason for that as hard drive is just storage. Hope this helps.
Yep..no problem once hd installed. I was concerned the operating system would have to be installed (like a computer), but apparently it's within the motherboard. Thanks for reply...
@@billywayne4222 yes sir plug and play ;)
Wrong HHD!!!!!!! Blue is NOT the correct HDD for CCTV application. You must buy WD Purple
This Brand is asking for a HDD 7200rpm or higher. I can't find any purple HDD with this amount of rpm
True western Digital Purple is a dedicated HDD for surveilance use because it has a better write than read speed but Caviar Blue works just as well and as the poster above says its 7200rpm vs 5400rpm. Remember the video is for a low load home surveilance application with a couple of cameras not a heavy duty 8+ camera industrial or workplace installation.
@@transporter1387 what Is the name of the power cable?
@@codyhagerty9766 The two cable are both Serial ATA but the power cable has 4 pins and I believe its called a SATA to Molex cable. Hope this helps.
@@codyhagerty9766 power cables come with HDD or also with DVR
broo there some place for do reset thank you so much ?
Are you wanting to rest the DVR or clear the hard drive?
@@garagebuilds5469 non rest the dvr
@@garagebuilds5469 because there are adamın password and old technicien he was forgeted the password
Go to system menu then maintenance. Then go to select factory default. It should then go to reboot and you can start all over again. If this does not work you can go to support@annke.com I hope this helps.
@@garagebuilds5469 thank you so much but the prob for entering to maintenance settings i need the password