@@thattannerguy856 I agree with you... Liquid nails is GREAT... Personally I would like to use the tiny nails, and NOT the liquid nails... incase you ever want to remove the wall... I guess it just depends on your substrate, what it's made of... (wall)
@@JudiChristopher nice. I bought a similar product to liquid nails. I don't plan on ever think it down while I'm in this house, so I'm not too concerned about the wall behind it. Thanks for your tips!
Really cool idea. Wish I knew about this a few years ago. I've had 3 extra cases of laminated floor boards stored in my shed, they're probably damage now!
Which actual Pergo product was used in the video - all the pergo materials and faqs on Home Depot and Lowe’s sites says that it should not be used for walls. Maybe I’m looking at the wrong products?
I'm sure it could go on a ceiling as long as you make sure you are fixing firmly, not good if it lands on your head while you are in a moment of passion!
Because youre gluing and nailing everything. Normally you'd have to drive the short sides together after clicking the long side. No need for that in this application, so the short sides will just lay nicely on top of each other.
May I add the following advice. I did this on a basement wall. It wasn’t easy because the wall wasn’t perfectly flat. What I ended up doing as it became apparent was I zinged off the tongue. This way the laminate was free to move in and out. This may be unnecessary for you but for me it was the solve. Start with at the top. Mark your studs on the ceiling also.
If you own your own house,why would you need building codes for the walls inside? Going to buy a house in a couple of months, a single house sitting by iitself,not a condo or apartment. Anything else that I need to know?? Thank you in advance😊Does anyone know in the comment section know?
You dont, they are making this 10times harder than it really is. It's very simple make sure the bottom row is level, just use a Brad nail and nail the 4 corners, install the rest and you only really need to nail the bottom, middle and top. Use rubber hammer to pound in place.
Isn't it funny how, just a few years ago, designers and common folk condemned that "ugly paneling" from the 1960's as "soooooo dated"? Now, the same people run basically the same thing horizontally on a wall and talk about how beautiful it is.
@@marshalllakeshaott4573 Funny, isn't it? I'm perfectly okay with panelled walls no matter what direction the panelling goes. When I was a kid, we had a basement with panelled walls. I also lived in a mobile home and had no problem with it. I think so much depends on what you get used to and tired of. A lot of times, too, we like what we see in other people's homes and think it would be nice in our homes - only to find out that what we liked for an hour somewhere is not what we would like for five years somewhere else. Also, some houses are like people. They can wear something really well and make it look cool while others just can't pull it off for a variety of reasons. Interesting how the mind works.
Free pallets look great if you have the time and resources. My late father and I built a beautiful wall with reclaimed wood from pallets, but these are two entirely different processes. Free pallets: Find quality free pallets, travel to retrieve free pallets, get permission to take said free pallets, and load heavy pallets into your truck or trailer if you have one (if not rent or borrow an appropriate vehicle or trailer to haul free pallets), drive back home and unload the pallets (return rented or borrowed vehicle if necessary and go back home), separate all boards from the 2x4s using a pry bar or sawzall (some are easier than others), dispose of or store scrap wood (there will be alot!), once you have all your wood you can then begin sanding each and every piece and sorting by height and width, then you could stain each piece if you'd like, then you can actually paint your area with a black base/primer to hide gaps once boards are installed, mark studs, and begin attaching your boards!!! Versus: Drive to Home Depot, pick out the material you like and drive back home, acclimate, and get started.
95% of walls don't qualify for this installation, not with all those restrictions and evenness needed. Imagine needing to work behind that wall :o/ Or needing to make outlet cuts or run wires for a flat screen TV? That sheet rock knife isn't going to cut it "Pun Intended" ;o)
Naa, like planks up down direction better and only full length floor - ceiling, dont like those visible connections, as if you made it from scrap wood.
I used a light gray flooring and installed it on my washer/dryer laundry room wall. Turned out bad ass. Nice accent wall.
How did it hold up with the dryer getting hot? That sounds so cool!
@@anneshirley95 no issues so far. No sign of heat effect. Still looks amazing
i installed laminate floor all over my car ,it protects the original finish and looks awesome ! Boxy but cool!
Nice just tried this and stuck floor vinyl up my wall. Looks awesome 👌
Great video mine turned out great!!!
Not only did this turn out BEAUTIFULLY done...
I love the way it was Video... Very Professional
Did you use nails? I was at the hardware store and they didn't say anything about nails. Just adhesive
@@thattannerguy856
I think he DID use nails, (fine nail gun)
@@JudiChristopher I meant is it necessary though? It would seem to me that adhesive should be enough.
@@thattannerguy856
I agree with you... Liquid nails is GREAT...
Personally I would like to use the tiny nails, and NOT the liquid nails... incase you ever want to remove the wall... I guess it just depends on your substrate, what it's made of... (wall)
@@JudiChristopher nice. I bought a similar product to liquid nails. I don't plan on ever think it down while I'm in this house, so I'm not too concerned about the wall behind it. Thanks for your tips!
I bought 3 packs of oak flooring, with a little work and some patience made myself a suit and matching shoes.....
😂
It does look pretty good.
I currently have shag carpet on my wall can I just go right over it with other flooring like this? Asking for a friend
Good morning which type of Pergo laminated is better to be installed on the wall?
Many thanks for Yr replay 😊
Excellent 👌👌👌🔥
Really cool idea. Wish I knew about this a few years ago. I've had 3 extra cases of laminated floor boards stored in my shed, they're probably damage now!
can i put it over a wall of tiles ?? ..if i glue it with liquid nails to the tiles it will holds good?
Very interesting l will try and see how it looks like
This would look great around my fireplace. Can it be put over brick?
This is a great instructional video if you want to take 3 weeks to do a 2-hour job
😂😂😂
I think I’m going to use drywall for flooring now.
😭😭😭😭😭😂🤣😂🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣
I wonder how would carpet look on a wall. Mmmhhh. 🤣
😂😂😂😂
Just choked on my coffee, thanks...
@@stayreal5083 Well, in russia they do
I used this on my inverted ceiling. It’s now my floor
Great job, thanks for sharing the info
can I just wall paper my wall with wooden planks pattern?
Very nice work!
Which actual Pergo product was used in the video - all the pergo materials and faqs on Home Depot and Lowe’s sites says that it should not be used for walls. Maybe I’m looking at the wrong products?
Makes sense to see thanks for showing me
Quick question can i do this to a hard wall,cement wall because i live in Malaysia...and malaysia houses do not use dry wall
Does the glue Peel off the paint on the wall
It's not glue, it's silicon caulking.
Looks amazing 👌🏻🇬🇧
How do you tap the laminate near the ceiling when you run out of room to swing a hammer?
Are these termites proof?
Maravilloso trabajo,saludos desde Torreón Coahuila México
Is laminate flooring useful or installed in brick wall or not??
What is the color/pattern used in the example?
Hi, This product is no longer available, since the video is from 2016 and we regularly refresh our product and color offerings.
Can this floor laminate go on the ceiling? Asking for a mate
I'm sure it could go on a ceiling as long as you make sure you are fixing firmly, not good if it lands on your head while you are in a moment of passion!
@@teacheng3795 did that happen to you and your boyfriend?
@@garyalcorn3831 How did you guess?
@@teacheng3795 seen through your window lol
Beautiful
I love this, beautiful
Can that be applied onto a concrete floor or wall without drywall?
probably with liquid nails or adhesive
What do I use for outside wall edge?
Lol look at 7:40 .that floor/wall isn't gonna hold if the pins can't hold it back nice and tight.
Ezanity e
LOOK at the END of the video...
He put a Trim all around...
Thought the same exact thing
This is such a nice and informative video I love it. Can I use your video for my compilation? I'll credit you of course!
Can you walk on the wall now?
Dantube I’m sitting in Home Depot and just started laughing!!😂😂
Man, I do when I'm drunk !
Cement well?
I have used it on ceiling and slanted walls never had a problem
Do you need to leave a 3/8 space for expansion? Or can you butt it right up to the walls on the ceiling?
Because of the way I did my walls I left about that
" A Cocking Gun " " Safety Glasses " " Gloves ". Best Friday Night Ever !!! 😂😂😂😂😂
If there is paneling on the wall how to prepare it so you can use planks
Rip the paneling down and install drywall. Then install the laminate to the drywall.
Lord! This guy should be a model
What is the length of the brads used, assuming you have 1/2 flooring and 1/2 drywall?
How do you account for expansion gap between the floor and the wall on the base row?
Trim I'd assume or shim it
My walls dont have studs, its plasterboard held on by dot and dab over breeze block, can this still be done?
if you're using the 7mm, you can still put it on.
Z poškodenej podlahy obklad na stenu? Aspoň by som ju nemusela vyhadzovať.
That looks smart
That's dum small peace on the top when the small piece should have been at the bottom so the trim could cover it
Whether available in Bharat I.e.INDIA
So what did this entire project cost?
What color is that?
How to attach the panels to gyproc (cardboard) please?
Can this be down vertically? And If So how?
Turn the panels 90 degrees
real nice
They must of gotten sued they spent 3 minutes going over disclaimers.
Why cut off the tongue of every 2nd row boards? Seems that would be needed to lock them in place. Maybe not an issue for wall install? Thx.
Because youre gluing and nailing everything. Normally you'd have to drive the short sides together after clicking the long side. No need for that in this application, so the short sides will just lay nicely on top of each other.
I put it round my car came up nice
I bet! LOL
Lmfao!!!
@@Lexibeez8907 3 years later thanks lol
Hi great job,can you please tell me how many millimeters is the size of the board?ty
May I add the following advice. I did this on a basement wall. It wasn’t easy because the wall wasn’t perfectly flat. What I ended up doing as it became apparent was I zinged off the tongue. This way the laminate was free to move in and out. This may be unnecessary for you but for me it was the solve. Start with at the top. Mark your studs on the ceiling also.
My wall is concrete how to do?
Good job thank-you
Everyone loves this EXCEPT that one guy who came home mad and tried to punch a hole in the wall
BaaHaHa... Good ONE!!!
Really need a gap for expansion if you glue and nail??
Yes. Just like tile(backsplash). Wood and tile etc all expand with humidity etc
...Both will pop up or break if expansion room wasn't left
But why do we need Pergo for this? I'm sure u could use any flooring u want
Matt M Because it’s the Pergo UA-cam channel and they’re advertising their own product
@@KessiaClips duh hey?!
If I'd install those panels verticaly, would there be any difference?
Yes
More caveats and disclaimers than watching how its done!
How important is it to use nail gun/brad nails? I dont have a nail gun ☹️
Depending on where you live, Home Depot rents out tools. I bought a small compressor for $50 and bought a small brad nailer for $25. Pretty slick.
How to wire a house when dry wall is installed
What a hamdaome man😍
Silicone is $6 a tube .... each row will use 1 tube ..... I would use liquid nails , $2 a tube
Me too, except if you want to remove it later...
Silicone is expensive in your country.
If you own your own house,why would you need building codes for the walls inside? Going to buy a house in a couple of months, a single house sitting by iitself,not a condo or apartment. Anything else that I need to know?? Thank you in advance😊Does anyone know in the comment section know?
You dont, they are making this 10times harder than it really is. It's very simple make sure the bottom row is level, just use a Brad nail and nail the 4 corners, install the rest and you only really need to nail the bottom, middle and top. Use rubber hammer to pound in place.
You said they had to go cortical at the beginning and now going horizontal
Sort of a modern 70s wood panel look.
Dove si trova?
Do you really nails? Shouldn't the right adhesive easily hold it up?
ThatTannerGuy - nails hold it tightly in place while the adhesive cures.
Isn't it funny how, just a few years ago, designers and common folk condemned that "ugly paneling" from the 1960's as "soooooo dated"? Now, the same people run basically the same thing horizontally on a wall and talk about how beautiful it is.
Amerikkkan
@@lenaely6146 If you write a whole sentence, I might be able to understand what you are trying to say.
Tim I was thinking the same thing lol self included since I will be doing this after years of complaint about my mothers paneled walls lol
@@marshalllakeshaott4573 Funny, isn't it? I'm perfectly okay with panelled walls no matter what direction the panelling goes. When I was a kid, we had a basement with panelled walls. I also lived in a mobile home and had no problem with it. I think so much depends on what you get used to and tired of. A lot of times, too, we like what we see in other people's homes and think it would be nice in our homes - only to find out that what we liked for an hour somewhere is not what we would like for five years somewhere else. Also, some houses are like people. They can wear something really well and make it look cool while others just can't pull it off for a variety of reasons. Interesting how the mind works.
Installed pergo on wall...
house flooded vertically
Super
I use Free Pallets
Free pallets look great if you have the time and resources. My late father and I built a beautiful wall with reclaimed wood from pallets, but these are two entirely different processes.
Free pallets:
Find quality free pallets, travel to retrieve free pallets, get permission to take said free pallets, and load heavy pallets into your truck or trailer if you have one (if not rent or borrow an appropriate vehicle or trailer to haul free pallets), drive back home and unload the pallets (return rented or borrowed vehicle if necessary and go back home), separate all boards from the 2x4s using a pry bar or sawzall (some are easier than others), dispose of or store scrap wood (there will be alot!), once you have all your wood you can then begin sanding each and every piece and sorting by height and width, then you could stain each piece if you'd like, then you can actually paint your area with a black base/primer to hide gaps once boards are installed, mark studs, and begin attaching your boards!!!
Versus:
Drive to Home Depot, pick out the material you like and drive back home, acclimate, and get started.
NICE
LOL, @ 7:35 the nail did NOTHING
nice
go directly to 6:10
95% of walls don't qualify for this installation, not with all those restrictions and evenness needed.
Imagine needing to work behind that wall :o/
Or needing to make outlet cuts or run wires for a flat screen TV? That sheet rock knife isn't going to cut it "Pun Intended" ;o)
I used a rotary tool to cut through the laminate.
These comments crack me up ?
That's probably because some of the comments were made by people on crack lol
Kahortaga roomadisiyada babirada mukeefka
Warning don't do this! .. I did and Now the dog keeps runnin up the wall
ohhhhhhhhhhhhhhhh this is funny
Staff 66 LOL!!!
Did they took a shit there
Hahaha! 😂
Staff 66 lol
now do a tutorial for the roof
I laminated my roof, and I was going to make a video but I got shingles.
What about expansion? This stuff expands ALOT
Did you actually watch the video?
@@jiojoe8829 yeah. Starting directly on the floor isnt expansion. Been doing floors for 20 years. Stuff moves.
@@AJNASTY-j5y it moves generally end to end.
@@edmontoninuit6489 false. It expands in all directions.
Ummm is this not VERTICAL install of laminate flooring?
vertically installed in a horizontal direction...
solid vid
Don't worry it's definitely as easy as it looks 🤣🤣🤣
Naa, like planks up down direction better and only full length floor - ceiling, dont like those visible connections, as if you made it from scrap wood.
YOU SHOULD HAVE DISABLED COMMENTS FOR THIS TUBE, LOTTA BRAIN DEADS HERE THANKS FOR THE VIDEO
The comments were funny. Made my day. Everyone was just joking lightheartedly.
Jeez if i knew the first half of the video was a safety video i would of fast forwarded most of it
Did You make it with woodprix instructions?
This has to be the craziest feature wall ever - people will look at this and just say WHY?????
I feel like this video was at least 50% Disclaimers on what NOT to do
Ovaj maneken u zivotu alata nije drzao u rukama pre ovog videa....