I was thinking maybe you could put some sort of big "balcony"/terrasse (maybe you could put a cargo area/landing pad on there) that would rest on the final layer of the mountain to make the transition to the city but the wall you made with bricks looks cool too
Another great update! I really can’t wait for the finished product with the awesome lights! I think you should do the stone wall, mainly because it just fits with the rocky asthetic of the giant rock mountain.
For the pillars you should use Lego duplo bricks, because they are big, cheap on second hand, and will save you 2 by 4s. I have used duplo bricks in my bigger Mocs too.
Here's my idea for the wall, it might be more accurate to make a much smoother, taller, more rounded wall, but that might be kinda hard to build. For the statues I prefer the brick built one's.
Great progress! For the wall you should do a stone wall in the bottom and a wooden style fence on top to mimic a Japanese defense wall since you said you were basing the city on Japanese architecture!
Every week I look forward to watching your weekly moc building updates. And I love the techniques that you used in the bridge building and also in the UTAT (I joined the UTAT stream yesterday it looked soo cool) keep up the good work and I can’t wait to see what the entire moc is going to look like when it’s finished
For the city wall, I think the medieval style wall looks super cool but I don’t think it would feel right with all the super futuristic looking buildings. I think an electrical/energy fence in the end would look best. Might be a hard challenge to make though but knowing your skills it shouldn’t be a problem.
The wall on the cliff should be grey with clear blue pieces in the middle. Adding a horizontal blue line going across would be cool and futuristic like Star Wars. On a side note: add some details from the original star wars battle front 2 game
What about an overhanging piece for the city ending and than a curved wall on top, resembling the style of the pillars with inverted slopes. So it kinda looks like the city is sitting on top of the mountain and symbolizing as well humanity putting themselves over nature.
For the flat section of the bridge, maybe you could add some snow pileup? There's snow on the lower section of the bridge, so perhaps it spilled over from the taller/flatter section.
Also I love the idea for the stone wall but it would be good if you could add technology to it in some way (also snow on top) to make it look more starwarsy
For the mountain railing. I would extend the mountan height and create a retaining wall on the city side. That would allow the mountain to retain its look whilst having a decent railing to prevent minifigures from falling off
Love the modification! It looks amazing! Great video and can’t wait to see more, also sidenote I live in Oklahoma and it almost never snows here but finally today we’re actually getting some snow for the first time in YEARS
Great to see you getting excited about constructing the city 😎🤙 I can’t wait to see what else you have planned, this is definitely going to be a sweet MOC.
I have a question about decalling, I've been doing it for a few months and I want to do more phase 1 but the blank helmets available kinda suck. Do you know anyone that makes good phase 1 helmets for decalling.
8:00 I would suggest looking at more rubble-based builds for the wall on the edge of the cliff. Maybe look at some of the ruined structures from ROTS & TROS??
I have a suggestion. Maybe you could divide the sections of Mygeeto kind of like Coruscant and have like the lower(poor) section with the minifig statues and the upper(rich) with the more complex statues
I know you we’re debating what would come out of the hanger that part of the smaller bridge.. you can have the CIS STAPs docked in there because they can fly if not hover on the bridge
It's so sad that these MOC dioramas aren't permanent. If I was a multi millionaire I would probably create some kind of museum or something so these things could be on display. And with an entry fee I could financially support the creators. (Then again I have no idea how much the maintenance and electricity bill as well as the cost for staff would be for such a building.)
I think a cool idea could be a bunch of 501st troopers exploring dathomir and fighting a rancor. This could look cool with the way you build your foliage.
I’m not sure about other people’s opinions but for the floor of Mygeeto I would recommend just pouring trans clear one by one studs. It would like great and be less build time.
As for the railing running on the side of the rock wall, I think it would be a good idea to make the brick wall that you had in the video, however also put some broken parts of the wall or some spots with snow or moss/vegetation growing on the side! Great video! ❤
Idea: make the tunnel on the maintenance bridge like an entrance/exit to a makeshift droid hanger in the black wall of darkness and maybe a vulture droid flying out and through the gap in the pillar, that’s why the clones are moving up the maintenance bridge, to neutralise the droid hanger
I was thinking, what would be a good idea for your fence is like a long grey wall, but with golden metallic tubes as railings, a bit like on your pillar.
I think for the fence on the rock wall you should make it with cylinder pieces for example 3 cylinders tall and then 5 or 4 cylinders tall so they kind of keep alternating
Hey coconut love the videos and im loving the mygeeto series as well you should add in regular snowtroopers as plain p2s i saw this in a clone wars comic book and thought it would be cool
hmm thats a tough one. both choices for the statues neat the stairs look good. but option one does have a more star wars look. will look cool seeing those Tri droids in the moc because they have blue and grey in them. Its a agree to disagree when it comes to the new style of clone minifigs.
I think you should put shorter buildings closer to the edge but then have taller ones in the back to give the illusion that the rock work didn’t stop in the city
I think that you should try to make a wall that is more tech-y than just a plain stone wall If you do use the stone wall, you should make it smooth and sleeker to look good with the more modern city
Ngl for that wall idea I think it would just look fine if the wall was that medieval look but mostly dark grey the same color as the build itself but also touches of that light gray thing you had going on👍
I have an idea, you should make a reck of a droid gunship in the city and it fell on part of a building and slid onto the ground!!
It would be even better if it also crashed into a republic gunship after hitting the building! 😂
Yeah, add some destroyed stuff and a ship crashed in a building
I was thinking maybe you could put some sort of big "balcony"/terrasse (maybe you could put a cargo area/landing pad on there) that would rest on the final layer of the mountain to make the transition to the city but the wall you made with bricks looks cool too
Another great update! I really can’t wait for the finished product with the awesome lights! I think you should do the stone wall, mainly because it just fits with the rocky asthetic of the giant rock mountain.
I agree but maybe let the rock flow into the wall a little bit, just an idea!
For the pillars you should use Lego duplo bricks, because they are big, cheap on second hand, and will save you 2 by 4s. I have used duplo bricks in my bigger Mocs too.
For the wall perhaps make it a natural rock wall that are stacked up around the city.
I love it I love the Moc I’m am building my own huge Moc I Ben building my huge Moc for 2 mounths with clones and I have comand Cody and caipten rex
Here's my idea for the wall, it might be more accurate to make a much smoother, taller, more rounded wall, but that might be kinda hard to build. For the statues I prefer the brick built one's.
For the support beams you should use technic 1 by bricks. It will make it stronger. Hope this helps!
Awesome! I can’t wait to see your designs for the mygeeto buildings and structures!
Great progress! For the wall you should do a stone wall in the bottom and a wooden style fence on top to mimic a Japanese defense wall since you said you were basing the city on Japanese architecture!
How do you afford all these big Mocs? also, Do you make back a large percent of your loss by reselling pieces?
every week just impresses me more and more
I really don't know how coconut does it
why dont you use duplo to fil huge space, this way you would save a ton a brick and it would be very strong.
Every week I look forward to watching your weekly moc building updates. And I love the techniques that you used in the bridge building and also in the UTAT (I joined the UTAT stream yesterday it looked soo cool) keep up the good work and I can’t wait to see what the entire moc is going to look like when it’s finished
On top of the mt you should some weird trees kinda like a bonsai tree but different colors so the mt can have a pop of color
For the city wall, I think the medieval style wall looks super cool but I don’t think it would feel right with all the super futuristic looking buildings. I think an electrical/energy fence in the end would look best. Might be a hard challenge to make though but knowing your skills it shouldn’t be a problem.
The wall on the cliff should be grey with clear blue pieces in the middle. Adding a horizontal blue line going across would be cool and futuristic like Star Wars.
On a side note: add some details from the original star wars battle front 2 game
5 minutes Club
8:42 hey if you don’t want those gross clones I will take them I can give them a good use :D
Video idea: dropping a $2000 MTT off of my roof.
What about an overhanging piece for the city ending and than a curved wall on top, resembling the style of the pillars with inverted slopes. So it kinda looks like the city is sitting on top of the mountain and symbolizing as well humanity putting themselves over nature.
I can’t wait to see the moc when it’s done
For the flat section of the bridge, maybe you could add some snow pileup? There's snow on the lower section of the bridge, so perhaps it spilled over from the taller/flatter section.
Also I love the idea for the stone wall but it would be good if you could add technology to it in some way (also snow on top) to make it look more starwarsy
You could give it a sleek look
For the mountain railing. I would extend the mountan height and create a retaining wall on the city side. That would allow the mountain to retain its look whilst having a decent railing to prevent minifigures from falling off
Hi coconut
I think that the stone walls look good and are the right option, however, you should add more maisonary bricks
I really like the wall design you came up with. The terrace idea is cool too
Love the modification! It looks amazing! Great video and can’t wait to see more, also sidenote I live in Oklahoma and it almost never snows here but finally today we’re actually getting some snow for the first time in YEARS
Bro, can I just say, this is incredibly amazing and you’re really good!!!!! Keep it up!! 🎉🎉🎉🎉
Maybe you can use the big red transparent walls used in the Justifier and put them sideways to be ray shieldsk so no one falls of the edge.
You made my whole week
Looking good 🙌 this is going to look awesome once it all comes together.
Great to see you getting excited about constructing the city 😎🤙 I can’t wait to see what else you have planned, this is definitely going to be a sweet MOC.
A battle damaged rock wall along the cliff would look good
I have a question about decalling, I've been doing it for a few months and I want to do more phase 1 but the blank helmets available kinda suck. Do you know anyone that makes good phase 1 helmets for decalling.
8:00 I would suggest looking at more rubble-based builds for the wall on the edge of the cliff. Maybe look at some of the ruined structures from ROTS & TROS??
I have a suggestion. Maybe you could divide the sections of Mygeeto kind of like Coruscant and have like the lower(poor) section with the minifig statues and the upper(rich) with the more complex statues
I know you we’re debating what would come out of the hanger that part of the smaller bridge.. you can have the CIS STAPs docked in there because they can fly if not hover on the bridge
It's so sad that these MOC dioramas aren't permanent. If I was a multi millionaire I would probably create some kind of museum or something so these things could be on display. And with an entry fee I could financially support the creators.
(Then again I have no idea how much the maintenance and electricity bill as well as the cost for staff would be for such a building.)
I think a cool idea could be a bunch of 501st troopers exploring dathomir and fighting a rancor. This could look cool with the way you build your foliage.
I don’t know if you know already or have it but the Star Wars: Archives book has some Mygeeto concept art. It looks really cool.
You know you can use non-lego pillars, right? (Non-lego as of plastic boxes or sth like that, never fake lego)
Technik bricks are really good for support if you have any. I look forward to your videos every week!!!
Yes! We're finally Starting the city and I think you should use the brick built statues instead of the minifig statue.
10:22 fellow partyers did you fucking hear that? Drop an addy Mr. Bricks, we are otw
I’m not sure about other people’s opinions but for the floor of Mygeeto I would recommend just pouring trans clear one by one studs. It would like great and be less build time.
You could make a clone gunship with delta squad infiltration the base
As for the railing running on the side of the rock wall, I think it would be a good idea to make the brick wall that you had in the video, however also put some broken parts of the wall or some spots with snow or moss/vegetation growing on the side! Great video! ❤
Idea: make the tunnel on the maintenance bridge like an entrance/exit to a makeshift droid hanger in the black wall of darkness and maybe a vulture droid flying out and through the gap in the pillar, that’s why the clones are moving up the maintenance bridge, to neutralise the droid hanger
Looking at images, for the wall it should be a stone wall. That’s how it’s depicted in comics and other media.
This gets better every week! Your vids are awesome! Keep it up!!!
I was thinking, what would be a good idea for your fence is like a long grey wall, but with golden metallic tubes as railings, a bit like on your pillar.
For the different levels for the city why don’t you make the higher the city the richer it looks
I think for the fence on the rock wall you should make it with cylinder pieces for example 3 cylinders tall and then 5 or 4 cylinders tall so they kind of keep alternating
Another awesome update!
Hey coconut love the videos and im loving the mygeeto series as well you should add in regular snowtroopers as plain p2s i saw this in a clone wars comic book and thought it would be cool
Nice update cant wait to see the moc completed keep up the good work
This is my favorite UA-cam channel and I love how it looks
This stone wall works i think!
You should definitely do the stone wall.
hmm thats a tough one. both choices for the statues neat the stairs look good. but option one does have a more star wars look. will look cool seeing those Tri droids in the moc because they have blue and grey in them. Its a agree to disagree when it comes to the new style of clone minifigs.
I think you should put shorter buildings closer to the edge but then have taller ones in the back to give the illusion that the rock work didn’t stop in the city
On the edge of the mountain add a landing pad for a civilian star ship. Or maybe a separatist ship
I think that you should try to make a wall that is more tech-y than just a plain stone wall
If you do use the stone wall, you should make it smooth and sleeker to look good with the more modern city
Great update! The stone wall looks the best and maybe add in some gun turrets firing on the bridges?
With your wall problem try making a laser panel like how malls do or with a metal frame and a big slab of glass.
I would try a railing on the edge with Headlight bricks and grey rods.
Maybe you should have the lower section the droid occupied area
It feels like -41 where i am, but im glad im not on top of the mygeto mountain
For the new handle for the battery box you could use a mini fig
whichever statue you do make it consistent dont have one statue different than the one next to it
A dark red bush fence would be beautiful at the top of the mountain so it works as a fence but also looks out of this world
I think you should make a stone wall with a fancy details on top of it for the edge of the cliff
You could use the smooth walls of the bridge as the wall of the city
Looking good mate
Well if you have statues that make the city look old the mid-evil wall would fit the look
I prefer the mush detailed statue instead the other statue because more details makes a better moc
Use a metal frame with a laser slab like they do at malls except they do it with glass
I really like the update can't wait to see the city building
9:49 don’t know if you noticed you used a printed or stickered peice
Thank you these techniques are really good
Use the minifig statue
Love your vids!
11:05 where do you buy your 16 x 16 plates from?
I like these wall and would like an droid canon behind it.
Where did you get the galactic marines?
You should build the big tri droid as part of the ut- at series
You should keep the status from Courasant
I thought it could be neat to have a at te falling of the bridge
The Galactic Marines looks 🔥
maybe make a wall thats a part of the mountain
Put the mini figure statue by the garden
The big statue is a lot better than the small statue
Hi
Hello there
Another banger😊
Brick built statue looks best
Ngl for that wall idea I think it would just look fine if the wall was that medieval look but mostly dark grey the same color as the build itself but also touches of that light gray thing you had going on👍
The stone wall looks great
How about a Laser fence
That’s a good stone wall
Love how it's going!🎉
ELECTRICAL FENCE