Hope this helps anyone looking to finally get that puddle lamp to work the way it should! If you found this video helpful take the second to 👊🏼 that 👍🏼
Just did this install today. Your instructions where perfect. Took me about 5 hrs to complete both sides. After doing the first side, the other side was a lot easier. Fitment ain't bad, but there is a gap at the end of the lights, which is kind of annoying. Especially since water can enter more easily. Good idea to seal this area with some kind of rubber sealant. Much appreciated.:)
Your comment is spot on with the install in regards to the other side being much easier. Everyone seems to have that gap there. Some clear sealant should work. I left mine with the small gap and haven’t had issues with water yet, but I do park my car in a garage. Thanks for watching!
@@ZillaFullBoost how were you able to take off that bottom cover? Any screws or just flips out? I'm trying to install mirror sequentials on my qx60 (it's the same part) and it's impossible to fish the wires through
Does that bundle of wire that goes inside that rubber grommet the same line as the puddle lights wiring? Can we just tap it outside instead of going all the way in by were the plug and play connectors are?
Hey can you help me out I got the front bumper sequentials with drl and I connected everything even with the resistor to the drl wire from the headlights and it hyperflashers any ideas how to fix this
I have a question…so i dont want drl running all days..i just want it to function just with me unlock the door..so the drl and the puddle comes on wen i unlock or open the door just with the factory lights
Hey, so basically if you want the turn signal to flash like normal you'd wire that instead of the other wires. It elimates the sequential feature. You can cut it short or leave it laying in the mirror assembly.
Got a question, are these the same turn signals as the ones that do like a dance when you open the door? I don’t want drl on at all just want the dance thing to work when I open the door so guessing tap into the door light. Which wire would that he ?
Yea they have a sequential pattern when opening the door, but I think that’s only on v2. That sequence is standard after plugging the turn signal wires to the oem plug.
Any help with with Q70 harness anyone? Please lmk. I have blue, white and black wires for my drl but I’m having trouble finding which harness gives me power
When I wired it like this my windows don’t go up automatically like if I double click it up but they go fine down automatically did the same thing happen to yours, I wired it exactly how you did
Make sure you have continuity with the harness you made. Try tugging the wires you cut and connected maybe you have a loose connection. If you didnt use a posi tap like his then maybe the tap didnt have a proper connection. It happent to me today, i bought the clip on tap and the metal clip didnt puncture the insulation so it didnt have a proper connection. I had to strip some insulation to make it work. Cheers
@@ZillaFullBoost update: I removed them because my windows are all rolling down. I roll them back up and turn off my car. As I walk away an hour or 4 my windows will roll down. I know about the key fob thing but that was not triggering it.
I need some help. I think i messed up my wires because the "purple" wire for the DRL's now has no current and for some reason the gray wire next to it now has a current. When i try to connect them nothing happens. Additionally my window rolls up only in segments not continuously. Does anyone know a solution?
Did u ever figure out your window situation? I installed these mirror lights on my qx60 and had the same issue with windows. I had to replace my whole switch to get windows to work again.
Hope this helps anyone looking to finally get that puddle lamp to work the way it should! If you found this video helpful take the second to 👊🏼 that 👍🏼
Have you figure out the issue with puddle light?
@@directorandylous3272 I don’t have issues with the puddle lamps 😎
Do you know why the drl stays on when the car is off and locked I plugged it to the purple wire but it stays on
@@StarBoy-nb4yd your lights are probably not the same as mine and the wire diagram is different or you wired it incorrectly.
Just did this install today. Your instructions where perfect. Took me about 5 hrs to complete both sides. After doing the first side, the other side was a lot easier. Fitment ain't bad, but there is a gap at the end of the lights, which is kind of annoying. Especially since water can enter more easily. Good idea to seal this area with some kind of rubber sealant. Much appreciated.:)
Your comment is spot on with the install in regards to the other side being much easier. Everyone seems to have that gap there. Some clear sealant should work. I left mine with the small gap and haven’t had issues with water yet, but I do park my car in a garage.
Thanks for watching!
Great video, much appreciated. My only issue is that you didn't show them on and functioning.
??? He did in the beginning
He didn't show that the Puddle lamps are working
Question about removing the bottom cover at around 5:08 . I think it was edited out.
What’s your question?
@@ZillaFullBoost how were you able to take off that bottom cover? Any screws or just flips out? I'm trying to install mirror sequentials on my qx60 (it's the same part) and it's impossible to fish the wires through
Great video, we go the install done and we we have hyper flas in the back tail lights any input?
I didn’t have hyperflash so not sure. I did however have tails as turn signal harness installed. Maybe that’s the difference,
Did you tap you tap into the power window harness for the DRL and power door locks harness for puddle lights?
The puddle lamp goes connected to the harness for the door handle. Taps into the puddle lamp off the door handle.
Does that bundle of wire that goes inside that rubber grommet the same line as the puddle lights wiring? Can we just tap it outside instead of going all the way in by were the plug and play connectors are?
Good question, I’m not 100% sure but I believe it’s from another source by the hinges.
Did you try this? Did it work?
Thanks for the video bro. Just installed mine!!
Great workmanship man.. can't wait til mine come in
Thanks, you’re going to love them.
@@ZillaFullBoost Yeah I know they come in Monday. I got you on Instagram to let me know about the honey cone Mirror overs and a price
Bro how did you remove that plastic cover UNDER the mirror (where the audio messed up)
do i HAVE to install the blue wiring? if i dont want puddle lamps??
@@onairrkicks no you don’t
Where do you get the extra wire from???
Hey can you help me out I got the front bumper sequentials with drl and I connected everything even with the resistor to the drl wire from the headlights and it hyperflashers any ideas how to fix this
You probably wired the resistor incorrectly. Watch some videos on that so it can help you understand it.
I have a question…so i dont want drl running all days..i just want it to function just with me unlock the door..so the drl and the puddle comes on wen i unlock or open the door just with the factory lights
So don’t connect the blue wire to the purple. Try the blue wire to the same one for the puddle.
@@ZillaFullBoost what color is that
I don’t remember, it’s in the video. I think it’s brown and gray. One is positive the other is ground.
@@ZillaFullBoostI tried this but now my drl light doesn't turn off
Can you turn the daytime running lights off on demand. Like when I shut the factory ones off by pressing the ebrake?
No, not where it’s wired in the video.
Great install video!
Can I make my stock sequential preform like this one
Nope
question, in case that I want just the welcoming lights, NOT the DRL, should I just not connect the blue cable? Tks
Correct, don't wire the blue to the purple.
Do the posi taps need to be 18-24?
That’s the correct gauge. I would use that one.
@@ZillaFullBoost ok cool, if they don’t have any which gauge would you recommend?
Hey I just have a question what does the green wire do and what did you do with it or where did you connect it ?
Hey, so basically if you want the turn signal to flash like normal you'd wire that instead of the other wires. It elimates the sequential feature. You can cut it short or leave it laying in the mirror assembly.
Got a question, are these the same turn signals as the ones that do like a dance when you open the door? I don’t want drl on at all just want the dance thing to work when I open the door so guessing tap into the door light. Which wire would that he ?
Yea they have a sequential pattern when opening the door, but I think that’s only on v2. That sequence is standard after plugging the turn signal wires to the oem plug.
Any help with with Q70 harness anyone? Please lmk. I have blue, white and black wires for my drl but I’m having trouble finding which harness gives me power
You the man bro nice video
If I want the puddle lamps to be on while driving but only when my headlights are on/at night what’s would be the proper technique?
Instead of wiring the drl to the harness right behind the panel you wire the puddle wire to it.
When I wired it like this my windows don’t go up automatically like if I double click it up but they go fine down automatically did the same thing happen to yours, I wired it exactly how you did
Hey, no mine are fine. You may have wired it incorrectly.
Am having the same issue
I plugged my lights into all the harness like said and I can’t get the lights to work beside the sequential.
Tyler Marinelli dm me on IG. Send me a picture or video of your wiring.
Make sure you have continuity with the harness you made. Try tugging the wires you cut and connected maybe you have a loose connection. If you didnt use a posi tap like his then maybe the tap didnt have a proper connection. It happent to me today, i bought the clip on tap and the metal clip didnt puncture the insulation so it didnt have a proper connection. I had to strip some insulation to make it work. Cheers
How would i be able to order these if still available?
I no longer carry them, but you can buy them from Amazon. amzn.to/41NOgV1
Hi what size Posi Taps did you use? Thanks so much!
Just added the link to the video description. 😎
@@ZillaFullBoost thank you so much man I appreciate all your help!
Can you provide a link to where you purchased the mirror LED turn signals?
I sell them. DM me on IG. ZillaFullBoost
Does the battery of the car has to be disconnected?
No it doesn’t.
Where you get the mirror from
I was selling them. I no longer sell them but you can go check out southbay_autoworkz on IG. Tell him I sent you.
Bro I want the same mirror caps you have it looks like a bmw m style where can I get one
I sell them bro. Message me on IG
@@ZillaFullBoost gmail?
What if I want the lights to always be on?
Where do I connect it to?
I just install these a week ago everything was working fine but the DRL won’t turn off anymore even though the car is off. It never done that before
Something went loose
@@ZillaFullBoost update: I removed them because my windows are all rolling down. I roll them back up and turn off my car. As I walk away an hour or 4 my windows will roll down. I know about the key fob thing but that was not triggering it.
Why doesn’t my purple wire have any power in it? And other wires also
Not sure. How did you check with a multimeter?
Hey, I just did this install today and my interior and kickplate lights aren’t working, you got any idea why?
Not sure my man. Go over your install again.
Waoo excellent👍🏻👍🏻
I need some help. I think i messed up my wires because the "purple" wire for the DRL's now has no current and for some reason the gray wire next to it now has a current. When i try to connect them nothing happens. Additionally my window rolls up only in segments not continuously. Does anyone know a solution?
Did u ever figure out your window situation? I installed these mirror lights on my qx60 and had the same issue with windows. I had to replace my whole switch to get windows to work again.
I have the same issue
What did u do to fix it??
Hey man, at 11:43 you talked about connecting it to the correct wires, what wires do you mean? Which wire should go where? Thank you!
I believe it’s Black with gray, white with brown for the puddle lamps.
@@ZillaFullBoost thank you!
I’m interested in purchasing the sequential lights. I know you said to DM you on IG. However, I don’t have IG.
Send me an email to: Miamiboyz305g at aol
Question bro , if I do it the quick 15 min way for sequential only , will I still get the bright white light after the turn signal goes off ?
No. Only thing that will work would be your Amber lights which are your sequentials. You won’t have the White DRL’s nor puddle lamps.
Mine came with pink and white for the long ones
Some come wired differently
🙏🙏🙏 very nice on point
Very nice an informational, BRO HOW YOU NOT GONNA SHOW THM WORKING AT THE END smh!!!!!
I showed them working in the beginning. Did you miss that?
Yea I think I’ll just do the sequential turn signals. The DRL looks a bit confusing, may try to find someone to install them.
It’s not as hard as it seems, but of course do things to which you feel confident.
👍😊👍
Sorry you did show them functioning in the beginning lol
It’s cool lol
Think I’m just gonna pay someone to install it
No worries. If you do want to give it a shot that’s what my videos for.
@@ZillaFullBoost hi how do I order the sequential mirror lights, let me know thanks Dom, I can't find you on IG.
My only upset after buying was that you can't take advantage of those beautiful yellow headlights while driving, only turning
Yea that just lights up as a turn signal
i want to buy this light for honda civic reborn, please reply me on Instagram.