How to remove stuck Jeep Wrangler doors easily
Вставка
- Опубліковано 16 жов 2024
- I watched a number of videos showing different ways to un-stick a jeep wrangler door but all of them looked too crazy to me! Here's a way to remove stuck doors off your JK jeep wrangler easily
Hope this helps!
Dude life saver!!! I used to unbolt the door from the body and that took almost 30-45 mins while a friend holding the door. Finally got my lazy ass up and did it this way but instead of hammering the pins ; I took a interchangeable screwdriver and stuck it inside the hole; and used a rubber hammer with Wd40 and bam doors popped out. Whole process took 10-13 mins. Awesome!!
I know this is old, but I was so frustrated until I found this video. Just bought a 2014 that never had rear doors removed. This trick worked with a little effort! Thank you for posting!!!!
Thanks for the great video, however, I would suggest you use an old rag behind the hammerhead or wrap the hammerhead with a rag so NOT to accidentally scratch or ding the door.
By far, best and most useful video on this issue. Doors came right off. Thanks
My Jeep was 14 months old before I tried to remove the doors. The driver door was not coming off. This method worked as shown in this video. The passenger door was hardly used in all that time and came off easily, go figure.
I think the trick is to only tap the bolt just enough to make a space to spray your lube. That way you don't risk fucking up the threads.
Excellent tip. This is the way to go. I struggled getting the doors off my brand new Jeep. The back doors were the worst, they wouldn’t budge. I’d recommend holding a piece of thin cardboard up against the door while hammering to avoid scratching the paint. Lube the pins/hinges up good and the doors will come right off next time. Keep them maintained with grease or anti-seize lubricant.
You looked pleased as punch when you were holding the door at the end ! Thanks for the advice, we have a 2000 TJ and I’ve been aching to get our doors off but they won’t budge! Will definitely try this method!
It wasn’t easy because my doors were realllyyyy stuck on there, but it worked! Thanks!
BEST, MOST INTELLIGENT demo yet...
This worked great! Haven't had my doors off in probably 5 or 6 years, and they were definitely stuck! Took about a half hour, and I used Blaster brand lubricant. Just be patient, they will eventually come off. Hammer a little, make some space in the hinge, then blast it with lube. Keep swinging the doors, and pretty soon when you are about to give up... you'll try to lift it one more time, and they are off! I would agree about the other commentors to wrap a towel around your mallet. And don't be afraid to wack it good. Just make sure if you have the bottom nut on a good 10-12 turns so it doesn't mess up your threads. Thanks for a great video. Good Luck everyone!
Good tip! Thanks!
Used your tip today removing my doors from my JKU. Three came off fairly easy, one didn’t want to move at all....then I remembered your video, worked like a charm ! Thanks!! I replaced the metal door liners with a set of Delrin liners. Great advise, thanks again!
Worked for me! I used a piece of 2×4 and hit it with a mallet. Took about 30 hits and then it moved enough to loosen. Make sure the door is open.
You are the man!! i saw all the other videos like you said and i said there's no way I'd do that. With your video, it took me not even 5 min. Thank you, you saved me a ton of headaches!!!!
Awesome. Am fixing to try this. Thanks for posting this.
EDIT: Worked great. I totally recommend this method. Be sure to use cardboard behind the screw you’re striking. 🇺🇸
The best explanation I have seen so far! My jeep doors came off with ease! Thank you dear Sir!
Great Job, your tutorial helped me and saved me from most likely have a stroke....😂😂
Rest assure, the neighbors are happy the cursing and screaming from my garage. I mean tha dog even went back to the house.
So my friend, you a a gentleman and a scholar... 🫵😎
I agree with +Ellis Sanders. 19 year old TJ and the doors were off in 15 mins. Much easier than any other suggestions I have found and worked perfectly! Thanks!!!!
Not only did you make it look easy but you saved me from hacking my doors off!
After pulling every muscle in my back I went to UA-cam and found your video. You sir, are a damn genius!!!! A million thank you’s!
Just the ticket to remove sticky doors! Worked like a charm...just keep at it. A word of caution though..make sure that when you start lifting the door by banging on the torx nut that you have the door open far enough to prevent the door from rubbing up on the bottom of the fixed Jeep door hinge. I scraped a bit of paint off before realizing what happened. Mopar "Crush" touch up paint applied and we're good to go!
-Craig
Craig Goble good point thanks
I'm a lady jeeper since 2011 and have trouble almost every summer. This worked thanks. 👌🏾👌🏾👌🏾
BRO. Thank you for sharing your genius with the world. Two year old jeep, so not much time for rust to deteriorate the threads and soften them. I put WD-40 in all the hinges, let it set for a few minutes, and moved the doors around (open, then closed, wiggled around). I gave them a few hits, and they popped right off (full strength was never used). I didn't have a mallet handy, so I covered a wrench with an old shirt and it got the job done.
I'm glad I found this. This method really helped me get my doors off so that I could replace the bushings. Thank you so much.!!
Worked good for me - but you still need to be patient -- also swing the door back and forth as you do it and be careful not to let it hit the front of the jeep.. *slow swinging helps plenty*
Thanks dude! You just saved my marriage!! Apparently, someone forgot to put the lock bolts on last summer- causing the doors to stick this year.
Thank you!!!! It was stuck, tried a few things and said 'Wait - don't continue - you're gonna break something. (Little did I know how close I was to seriously damaging the inside pin!) Your simple, but very effective solution did it. Putting the bolts back on and hammering them up gave me gap I needed to put in more lubrication to eventually get the doors off (swinging back / forth and upward lift). Hint - if you are replacing the linings (as I was) carefully chisel the lip of the existing lining off and using the lining removal tool - hammer down from the top rather than from the bottom up as normally directed. MUCH EASIER!
Tried a lot of different methods, this is the one that got the job done. Thanks for the tip.
Thank you sir for this quick tutorial. Your method worked 1st attempt. I had been trying for about 30 min until I gave up and did some searching.
hollllllly crap! I have stuck doors too and I've always thought that putting a jack under my door even with styrofoam between was risky! I am so glad I found this video.....I will be trying this tomorrow!
I was so glad to find this video! It was a simple and easy solution. Who knew the cap screwed to the pin!! So much easier than trying to reach the pin with a screwdriver! I added a little WD-40 for extra help and tapped the hinge with the door open at different angles. The doors easily came off. Thanks for the great tip!!!
Took my doors off for the first time tonight. First 3 came off with no problems. Couldn’t get the last one off so I watched this video and did exactly what he shows. I held a small piece of cardboard against the door so I wouldn’t damage the paint and shot some WD40 in the gap. The door came right off....
Worked perfectly we just bought an 08 and its never had the doors off this trick did the job perfectly thanx!!!
This was the only thing that helped me get my two rear doors off. Still took 45 mins for one but it worked. Thank you. PB Blaster and a 4 lb sledge and time to soak in.
I did use cardboard between the pin and hammer. When space opened up, I would spray PB Blaster and have a rag to catch the overspray and drips. Also had rag under the bolts to catch drips.
I bought a used Jeep 3 days ago and wanted to take the doors off. I was so sad but I foubd your video. I had been trying different things for about a half hour. After using your method I got them off in 10 minutes. Thank you!
P.S. I found if they are REALLY stuck, holding the top of the door with your hand while kind of squatting under the door and using your thighs to push up the door was stronger than using my arms alone. I'm tall enough to do it and this might be harder for shorter people but I found my legs were much stronger and it didn't hurt my hands and arms as much
I tried this and have more strength this way too. I will start some banging on mine . This used jeep needs bangs 😢
Worked perfectly. My doors were on for a few years and all the other methods looked way too difficult. A few whacks and it was good.
Does taking a hammer to those screw/bolts sound like a good idea? After my second Summer - and it was a struggle to get the passenger side off that second time around - I bought the sleeves from Quadratec AND, more importantly - each Fall I've coated both the pins and insides of the sleeves with that silver anti-seize goop - you know, the stuff that won't come off your fingers and covers everything you touch - yeh, that stuff, it's a nightmare - but unless your pins are bent or your hinges get out of alignment - those doors will come off WITHOUT a hammer, the next Spring/Summer. Just budget yourself a couple hours to apply the silver-stuff in the Fall, have your rags on hand to wipe up all the excess that squishes out - have a plan for those rags (trash or wash) and, don't touch any door knobs on your way back in the house!
That was perfect !!! My rear doors were stuck . Thanks so much for sharing.
Thank you Joe! I've been really struggling with getting my doors off for the longest time. Your method worked perfectly for me.
I also have a 2012 JK and got the same problem as you... Will try this tomorrow. Thank you for the help!
It worked! One of ours was really stuck...
Thank you, I've been trying to figure out how to do this for a week
Thanks! That worked. I had to pivot the door back and forth while lifting and it eventually lifted off. I didn't spray it. Also, I agree that you should not use a jack or an over head lift. You can damage your door.
I’m glad I looked at the second suggestion for stuck jk doors. Thank you!
By far the easiest and best way to do it
Thanks Joe! By far the best way to get my stuck doors off. Would not put a jack under the door. Also replacing the hinge bushings now with TMR Customs door hinge liners. Dont plan on having this issue ever again.
Thank you, Joe, great video. God bless you and your ministry.
Just did this to my 2010 wrangler I just bought worked great. I didn t have nuts on door so used a small punch to open seam. Not worried about thread not putting nuts back on threads.
🧐
Very good video!
this is an old trick to loosen bolts that are frozen in place. The small taps will break the threads loose again. always make sure to have 3 or 4 full threads and it will be perfectly fine, not enough threads and it will be a mess to fix.
Thanks for this simple, straight forward way to get the doors unstuck. Easiest way for sure. Best video suggestion I found. Thanks again!
Many thanks for the info! Bought my first Jeep late last fall and, now that it's finally warm in Ohio, I tried to remove the doors. No-go. It's an '01 with only 69K and I don't think the doors have even been off. Garage kept and very well care for, so I'm sure the doors just need some persuasion. Can't wait to try your technique so I an cruise in the open air!! Thanks again, sir.
It worked on one of our doors and I was just as pleased as you when it did! Thank you!
This worked amazing. Thanks for the tip. I ended up using a piece of cardboard against the door to prevent from being my wacked with the hammer.
Good thinking and good video. Though, I bought a 2007 jeep and many times these doors have never been taken off. At this point nothing will work, the only thing to do is to remove the hinges from the frame. take the door lay it down and beat the hinges apart. They will come off at that point, just don't forget to buy new hinges.
It works!!! Jacking the door not working. It jacks my Jeep up instead of door :( . Thanks a lot for sharing!!!
Best video I've seen, using that jack is scary. Lol
Thx for this informative video. I will definitely try this first thing tomorrow. Take care and stay safe! Happy motoring
Thx man! Worked perfectly 👍
I used a piece of thick cardboard behind the nut when I hammered.
Nice! You scared the hell out me with that hammer. Definitely should protect the paint.
Common sense will always prevail good one going to try on my stuck back doors
thank you couldn't get ours off! they have been on for 10 years... did your trick and they popped off!
Worked perfectly for me. You need to put a little muscle into the lifting up part, so it helps to have 2 people. All doors were off for the first time in about 10 mins per door.
You make it look so easy; but 20 minutes later and still no luck !
Thank you so much! I was struggling the last hour with mine!
Thank you! worked well. Liquid wrench to loosen and your technique to open it up. Yes i thought a jack might damage something. Great video
This IS the video to watch - works great !!! Thanks
Best video ever!!! Thank you so much.
Glad you made that video, did not want to wreck my GF jeep lol. Thanks for sharing.
this helped so much today ty i have a 2016 jeep and they were stuck so ty
THANK YOU! Such a better way to get them off then potentially denting the bottom of the door with a jack
Great fix. I needed that! Thanks Joe
Worked like a charm! Thanks
Front came off easy, rear doors won't budge. I will try this - Thanks,
Soak the hinge with silicone. Worked for me. Took me 30 mins for pass. rear.
I’m trying mine tomorrow! Thanks for the info!
👌🏽 perfect. Short sweet and to the point! Thanks, can't wait to get my stuck doors off! 😂
Thank you this worked in seconds!
Need to go try this
Did what you said and it worked but now my threads are damaged and the bolts or hinge guides won't thread back onto the pins. On the passenger side, I sprayed lubricant in the hinge, applied pressure and walked the door back and forth. It came out with no hammering and no thread damage.
Best video awesome information was able to remove my doors in a matter of minutes
Thanks for posting! Exactly what I needed!
Thanks, this saved me a major headache! Good vid
Nice tip. To make sure you don’t scratch the paint with the hammer I suggest buying a magnetic sheet to put on the side of the Jeep under the hinge.
This worked for me, thank you so much
Glad this helped so many... did not help with my rear doors.
This worked for my door, but it also destroyed the threads on the hinge pin. It was really stuck. But its probably less damaging than using a jack
Yep, wish I had seen this before I made myself crazy but this same idea came to me after I went on to something else. Mine were only stuck on the rear but man they were stuck! It took a bit longer for mine to release and a couple more applications of wd40. Oh, and I DID hit the paint on one side... more than once! Nothing a little touch up paint won't fix.... but still.... Anyways, it's great this video is up for those who are struggling with their doors. Think I would've had it a bit easier had I used heavier hammer also, not so many swings ie, chances to smack your body or doors. 👍🏻👍🏻
Worked great. I was careful and it did the trick!
Looks like you figured it out!! Good job. Thanks...
About to try it, thanks for this videos so helpful👍
Great idea! Also, put some painter's tape on your paint to protect it. Thanks!
Worked perfectly for me! Thanks
This worked! Thank you so much my friend.
I tried this with a punch instead of the bolts and it was not working well thanks for the great tip.
Does pb blaster ruin the paint? Thanks for the video!
Martha M. Not if you wipe it off right away. But you should not just leave it there
This worked for me. When I finally loosened it up to the point where I had a little space, I sprayed wd40 and then lifted and set back down the door to help the 40 get a bit further down in the hinge. After doing that a couple times the door slid off so quickly I could easily see dropping it. And that was after not being able to get it to even budge. Do it in the grass to stop you from dropping it on concrete.
Wow! I'm trying this today!! Never had my '16 JKU doors off...I'll report back...
Thanks man! I placed a floor jack under mine, with the handle up to the pin, sprayed wd40, and both stuck doors popped out after 1-2 minutes. 2016 JK
Super helpful. Bought my first Wrangler over the winter, and I tried to take the doors off today and had the same issue. Will try tomorrow.
Ok so you said it's threaded so you risk bending the thread if you hammer too hard ?
This did work for me as well but it did take some time. I just kept banging and spraying WD40 along with a few rest periods in between as it can be frustrating. I have a 2012 and the doors have never been off. Also realized i need to buy new door hinge liners now as well.
I had the same problem with the driver side rear door. I actually just held on to the door and swung/rocked myself back and forth until the door came off.
thank god i found this, i did not want to hoist or jack my door up!
Very good tutorial! I will try it hopefully it will work out for me too! Thanks for sharing!
Brilliant. I saw violent vids without keeping bolts on a few threads