Submerge in 5 gal of gas shake it over and over and watch what comes out of it. That's your problem dirty transmission. I have a custom S550 I did it and the key started working again and transmission is fixed. So now you see that your neutral switch connection was dirty.
what keeps oil from coming in the conductor plate side of the plug? I seem to have oil in my plug, but new rings do nothing. Seems it would need a seal on the back of the plug on the conductor plate side. Has anyone seen similar? Plz help 😢
We do in the following parts of the video, where programming takes place. This is due to the old pate being plugged in to pull the data from, before plugging in the replacement one.
Thanks for providing the torque specs. Most videos left this important information out
Glad it was helpful!
very clear instruction
Thank you!!!
Good job sharing
Thank you!!
i like you video
Thank you!
good information
Thank you!
how much is Newton meters in Inch pounds? great video by the way
How do you convert Newton meters to inch pounds?
You can enter the Nm value on google and convert to ft-lbs.
You can enter the Nm value on google and convert to ft-lbs.
Hi
Thanks for your video
Would mind if you let me know how solenoids are numbered?
I want to change the solenoid number 3
Thanks
What is the year and model are you working on? I can see if I have that info.
@@AutolandScientechUSACedarPark thanks for your replying
2014 A class 1.8
Do you know which one those solenoids is the "D"Circuit. I have a p2759. hard shift occasionally.
You can use a wiring diagram for your vehicle to identify the solenoid in question.
If this fails, would I have a check engine light or any light in the dash?
Yes.
Did you use new fasteners on the ECU or the pan?
Yes.
Can I take the plate out of the broken trans & put it in the new,used trans & it will work ?
No, needs programming.
Great mechatronics
Yes!
How to do you marry it to the transmission (coding)
Please see the video for step 3 - coding/programming with iSCAN - ua-cam.com/video/xWbZ00pAXX4/v-deo.html
Submerge in 5 gal of gas shake it over and over and watch what comes out of it. That's your problem dirty transmission. I have a custom S550 I did it and the key started working again and transmission is fixed. So now you see that your neutral switch connection was dirty.
See the video for step 3 - coding/programming with iSCAN - ua-cam.com/video/xWbZ00pAXX4/v-deo.html
Thank you, Eric.
Thanks for the info.
what keeps oil from coming in the conductor plate side of the plug? I seem to have oil in my plug, but new rings do nothing. Seems it would need a seal on the back of the plug on the conductor plate side. Has anyone seen similar? Plz help 😢
That is an internal leak in the part. You can't seal it with an O-ring, needs a new plate.
How do you program this valve bory
See part 3 of this video.
I am an apprentice mechanic in all auto Mercedes Benz
I need more more learning and the solution to the problems I may come across the conductor plate
Keep an eye on our youtube channel for more Mercedes-Benz content!
How much is 8n nution meters in ft/pounds?
5.9 ft-lbs
@@AutolandScientechUSACedarPark thanks 🙏🏼
Please! gaskets don't fail just use the old one but tighten DIY tight with real hex head screws discard theirs. Tricks of the trade
That is incorrect. Rubber and plastic degrades. Please replace gaskets.
U don’t show how to connect the plug
We do in the following parts of the video, where programming takes place. This is due to the old pate being plugged in to pull the data from, before plugging in the replacement one.
Always used ur hand to catch any bolt never a gun simple so I see few mistakes
Thanks you for watching!