New Fuel Gauge and Working on the Cab
Вставка
- Опубліковано 13 чер 2019
- New fuel gauge for the John Deere 2510, let's see if we can finally see the fuel level? Replaced the fuel gauge, which unfortuantely was quite abit deeper than the old one and created a clearance problem. Also started working on the cab, pulling off the windows, doors, cleaning, etc.
Twitch: / rdallen
Twitter: / randydozeman
Instagram: / therdallen
Check us out on Facebook: / rdallengaming
Get Your Own RDAllen Shirts: shop.spreadshirt.com/rdallen/
Monthly Snacks! www.universalyums.com/?ref=yum...
Music: www.purple-planet.com
/ nocopyrightsounds - Розваги
I have a JD5510N I am fixing up. I have the identical problems!
Keep up the good vids
Push them to little quarter inch bars to the left and right that shut the valve off it won’t leak after that it’s only leaking what is in the lines
Those SCVs have always been a problem for us on our 4020. Dad has replaced every seal, O-ring in them and they still leak. We have 2 on it, one leaks, one doesn’t.
Just seems odd to me they weren't leaking before or at least not much, now it is by far the worse leak on the tractor!
The leak in back, you can make a short line from 1 to the other, leaking because u use them! Not your fault , Also if you keep use them they will reseat ,Maybe.? Also they dew make them, easy as few bolts, and couple fittings and new head, then put back together! Done :)
There kinda like grease fittings Leak wise :)
Might see if I can fix them first if not then I’ll try the hose trick
The hydraulic remotes might need orings in the couplers but if they go from hot to cold to hot to cold a lot then they will crack
I'm thinking I'm probably going to try that first.
Is coming along great and never worked on a jd bout with most of the tractor iv worked is Ben the a rubber in the back of the hydraulic hope that might help and ps beat vid and I always like
I'll probably see if I can get a seal kit for them then.
Curious with that raised bezel on that fuel gauge you didn't have no problems I just bought a sending unit for mine and still got my old fuel gauge hooked up and it shows even Fuller when the new sending unit plugged in so I'm assuming I got to match the fuel gauge up
No, seemed to work fine.
@@radozeman I think the reason I've got a problem with my new sending unit and the the old gauge because the electrical system in 1964 he's to be positive ground I had to call today and have them send me a different one with a negative ground setup we will see here this afternoon
They will until you turn those little bars on the bottom that basically shuts the quick coupler off
That little bar just locks the coupler for the implement in, I don’t think that helps much.
It will be the Cupler leaks what Is in the line I have farm do with international Harvester and John Deere both of them are the same you have to turn the is in the line I have farm do with international Harvester and John Deere both of them are the same you have to turn The Cupler off when hoses are not hooked up to it the way he has it turned now is when you have hoses hooked up to it
Pretty sure if I do that it makes the leak much much worse!
It will, because it will act like there is a coupler in there.
Good possibility
Can you do some more The HUNTER CALL OF THE WILD please
I plan to yes.